Scotts S2546 manual Installing Mower, Picture Note Front of left hand front wheel shown

Page 48

INSTALLING MOWER

Installing Mower

cCAUTION: Avoid injury. Before installing

mower on machine: STOP engine. Remove key. Wait for all moving parts to STOP.

Mower blades are sharp. To avoid injury, always wear gloves when handling mower deck.

Mower lift lever under tension. To avoid injury, grasp lift lever securely and release lock slowly.

1.STOP engine, LOCK park brake, DISENGAGE PTO lever, turn key to the OFF position, and remove key.

2.Raise mower deck lift lever to the UPPER position.

3.Turn steering wheel fully to the left. Carefully slide the mower deck under the right side of the tractor (with the mower discharge to tractors right side) taking care to avoid interference of the rear draft arms with the underside of the tractor.

4.Lower mower lift lever to the LOWEST position.

B

H

HJ

G

J I

G

I

Picture Note: Front of left hand front wheel shown.

8.Insert angled end of front draft rod assemblies (G) through holes in front axle brackets (H).

NOTE: The draft rod assemblies are inserted from the inside of the mower deck brackets toward the outside of the bracket.

9.Raise front of deck and block. Insert angled end of front draft rods into forward holes on the front brackets (I) of the mower deck.

F D

E

C

10.Secure each draft rod with flat washer and spring locking pin (J).

L

A

Picture Note: Left side of tractor shown.

5.Position the deck so the rear draft arms (A) are between the guide rods (B) and the lift arms (C).

6.Lift the mower deck. Place wood blocks under each side of mower deck and align the holes in the front of the rear draft brackets (D) with the holes in the frame bracket (E).

7.Insert rear draft pins (F) through rear draft arms and frame bracket from the outboard side. Secure with spring locking pins.

M

K

 

Picture Note: Shown from behind L.H. front wheel.

11.Pull down on left-hand side of belt guide (K) and rotate away from engine pulley (L). Install belt (M) onto pulley and return guide to original position. Insure that the guide is seated into the hole.

Installing Mower - Page 45

Image 48
Contents OPERATOR’S Manual Introduction Thank YOU for purchasing a Scotts productTable of Contents Assembly Connect and Check BatteryIdentify Parts Checking Tire Pressure Tire Size Pressure-kPa psiSafety Signs Safety-Alert SymbolMachine Safety Labels CertificationPicture Note Located on Battery under seat Picture Note Located on Right-Hand side of deckPicture Note Located on Left-Hand side of deck Controls Tractor ControlsOperating Machine Operate SafelyPark Safely Avoid Tipping Keep Riders Off Wear Appropriate ClothingAdjusting Seat Using the Park BrakeTransport Safely Using Throttle Control Starting EngineCold Weather Starting Tips Using Travel Controls Warming and Idling EngineStopping Engine Disengage mower or attachment before backing upUsing Reverse Implement Option To Travel in ReverseDaily Operating Checklist Testing Safety SystemsPushing Machine TestTest Avoid Damage to Plastic and Painted Surfaces Avoid Using Ground Engaging Equipment Using Front WeightsUsing Rear Wheel Weights Using Tire ChainsAdjusting Cutting Height Operating MowerOperate Mower Safely Check Ground ConditionsM40161 Adjusting Mower Level Front-to-Rear Engaging and Disengaging Mower Dismounting to Inspect or Unplug Mower or Optional BaggerDisengaging Mower Replacement Parts John Deere QualityParts for Tractor Parts for Mower Decks Inch DeckService Machine Safely Practice Safe MaintenanceAvoid Injury From Contacting Blades Service Interval Chart Service IntervalsService Record Service Engine Adjusting CarburetorAvoid Fumes Engine OilMake sure engine is Cold when checking engine oil level Checking Engine Oil Changing Engine Oil and FilterChecking and Cleaning Air Cleaner Elements Service precleaner Checking Spark PlugsReplacing Fuel Filter Service Steering and Brakes GreaseWheel Spindles Axle PivotAdjusting Brakes Service Mower Avoid Injury From Contacting Blades GreaseAdjusting Mower Belt Tension Replacing Mower Drive BeltAdjusting Spindle Brake Checking Mower Blades Servicing Mower BladesSharpening Blades Balancing BladesService Electrical Checking the BatteryClean Battery and Terminals Removing and Installing the BatteryCharging the Battery Using Booster Battery Replacing Headlight BulbReplacing Fuse Service Miscellaneous FuelUsing Clean Fuels Using Fresh Fuel and StabilizersOctane Rating Fuel BlendsCare for Plastic and Painted Surfaces Avoid DamageRepair Service Miscellaneous Removing Mower Removing MowerInstalling Mower Installing MowerPicture Note Front of left hand front wheel shown Picture Note Left side of tractor shownInstalling Mower Troubleshooting Using Troubleshooting ChartEngine Troubleshooting Mower Troubleshooting Storing Machine Storing SafelyPreparing Machine for Storage Preparing Engine For StorageRemoving Machine From Storage Specifications DimensionsElectrical System Tires Mower DeckRecommended Lubricants Cutting Width mm 46Warranty Limited Warranty for NEW Scotts Brand ProductsTire Warranty Limited Engine WarrantyWarranted Parts Limited Battery Warranty To Secure Warranty ServiceIndex GreaseRemoving Mower Reverse Implement Option, Using Service Literature Order FormTitle Number Price Qty Total Page Page Investment in Quality Refer to your operator’s manualContact your dealer Call the Customer Communications Center

S2546 specifications

The Scotts S2546 is an innovative lawn tractor that has been designed to provide homeowners with a reliable and efficient gardening solution. With a powerful 24 horsepower engine, this machine can manage various lawn care tasks, making it ideal for medium to large yards. It combines performance with ease of use, ensuring that even novice users can operate it effectively without prior experience.

One of the key features of the Scotts S2546 is its 46-inch cutting deck. This spacious deck allows for wider mowing paths, reducing the time spent on mowing and making it perfect for larger lawns. The cutting height can be easily adjusted through a simple lever, offering a range of heights from one to four inches. This flexibility helps users achieve the desired lawn appearance while promoting healthy grass growth.

The S2546 incorporates advanced technologies to enhance mowing performance. Its auto transmission system delivers a smooth driving experience, allowing users to adjust speed easily with just a push of the pedal. This feature provides optimal control while navigating through various terrains and obstacles in the yard. Additionally, the tight turning radius of this lawn tractor enables easy maneuverability around garden beds and trees.

Another standout characteristic of the Scotts S2546 is its user-friendly design. The comfortable high-back seat provides ample support, reducing fatigue during long mowing sessions. The intuitive control layout places all essential functions within easy reach, making it simple for users to maintain focus on their mowing tasks. Furthermore, the onboard storage compartments offer convenient space for tools and accessories, keeping everything organized and ready for use.

Safety features are also a priority in the S2546, with an automatic engine shut-off if the operator leaves the seat, preventing accidents. The durable construction of the tractor ensures that it can withstand the rigors of regular use, while the powder-coated finish protects against rust and weathering.

In summary, the Scotts S2546 lawn tractor stands out due to its robust engine, expansive cutting deck, and user-friendly design. With advanced technology, enhanced safety features, and a focus on comfort and control, it is a dependable choice for homeowners looking to maintain their lawns efficiently and effectively. Whether mowing, mulching, or bagging, the S2546 delivers an exceptional lawn care experience.