Scotts S2546 manual Replacing Mower Drive Belt, Adjusting Mower Belt Tension

Page 35

SERVICE MOWER

Replacing Mower Drive Belt

cCAUTION: Avoid injury. Before replacing

mower drive belt: STOP engine, remove key, wait for all moving parts to STOP, and wear gloves when replacing belt.

1.STOP engine, LOCK park brake, place gear shift lever in NEUTRAL (N) position, pull PTO drive lever back to DISENGAGE, turn key to the OFF position, and remove key.

2.Remove mower deck. (See Removing Mower in Removing Mower section.)

3.Remove six capscrews and left and right belt guards.

A

4.Pull pulley (A) to the left and remove mower drive belt from engine pulley and then remove from mower.

5.Install belt in reverse order of removal.

6.Reinstall belt guards and tighten capscrews securely.

Adjusting Mower Belt Tension

cCAUTION: Avoid injury. Before adjusting

Mower Belt Tension: STOP engine. Remove key. Wait for all moving parts to STOP.

IMPORTANT: Avoid machine damage. Spindle brake engagement must be checked every time the mower belt tension is adjusted or belt damage may occur.

1.Park tractor on a hard, level surface.

2.Stop the engine, remove key, wait for moving parts to stop.

3.Place mower deck in LOWEST setting.

4.Engage PTO drive lever.

A BC

F

E

C

D

F

5.Measure distance from bracket (A) to washer (B) on tension rod (C). Distance (D) should be: 20 – 25 mm (0.78

– 0.98 in).

6.If adjustment is required, continue with Step 7.

7.DISENGAGE PTO lever.

8.Remove spring locking pin and washer (E) and disconnect tension rod from blade drive arm.

9.Loosen lock nut (F).

10.Turn fitting on tension rod clockwise to shorten and counterclockwise to lengthen effective rod length.

11.Tighten lock nut (F) to 27 N•m (20 lb-ft.).

12.Assemble tension rod and recheck dimension (D).

13.Check brake clearance. (See Adjusting Spindle Brake in this section.

Service Mower - Page 32

Page 34 Page 36
Image 35
Page 34 Page 36
Contents OPERATOR’S Manual Thank YOU for purchasing a Scotts product IntroductionTable of Contents Identify Parts AssemblyConnect and Check Battery Tire Size Pressure-kPa psi Checking Tire PressureCertification Safety SignsSafety-Alert Symbol Machine Safety LabelsPicture Note Located on Left-Hand side of deck Picture Note Located on Battery under seatPicture Note Located on Right-Hand side of deck Tractor Controls ControlsPark Safely Operating MachineOperate Safely Wear Appropriate Clothing Avoid Tipping Keep Riders OffTransport Safely Adjusting SeatUsing the Park Brake Cold Weather Starting Tips Using Throttle ControlStarting Engine Disengage mower or attachment before backing up Using Travel ControlsWarming and Idling Engine Stopping EngineTo Travel in Reverse Using Reverse Implement OptionTest Daily Operating ChecklistTesting Safety Systems Pushing MachineTest Avoid Damage to Plastic and Painted Surfaces Using Tire Chains Avoid Using Ground Engaging EquipmentUsing Front Weights Using Rear Wheel WeightsCheck Ground Conditions Adjusting Cutting HeightOperating Mower Operate Mower SafelyM40161 Adjusting Mower Level Front-to-Rear Disengaging Mower Engaging and Disengaging MowerDismounting to Inspect or Unplug Mower or Optional Bagger Parts for Mower Decks Inch Deck Replacement PartsJohn Deere Quality Parts for TractorAvoid Injury From Contacting Blades Service Machine SafelyPractice Safe Maintenance Service Intervals Service Interval ChartService Record Engine Oil Service EngineAdjusting Carburetor Avoid FumesChecking Engine Oil Changing Engine Oil and Filter Make sure engine is Cold when checking engine oil levelChecking and Cleaning Air Cleaner Elements Checking Spark Plugs Service precleanerReplacing Fuel Filter Axle Pivot Service Steering and BrakesGrease Wheel SpindlesAdjusting Brakes Avoid Injury From Contacting Blades Grease Service MowerReplacing Mower Drive Belt Adjusting Mower Belt TensionAdjusting Spindle Brake Servicing Mower Blades Checking Mower BladesBalancing Blades Sharpening BladesRemoving and Installing the Battery Service ElectricalChecking the Battery Clean Battery and TerminalsCharging the Battery Replacing Headlight Bulb Using Booster BatteryReplacing Fuse Fuel Service MiscellaneousFuel Blends Using Clean FuelsUsing Fresh Fuel and Stabilizers Octane RatingRepair Care for Plastic and Painted SurfacesAvoid Damage Service Miscellaneous Removing Mower Removing MowerPicture Note Left side of tractor shown Installing MowerInstalling Mower Picture Note Front of left hand front wheel shownInstalling Mower Engine TroubleshootingUsing Troubleshooting Chart Troubleshooting Mower Troubleshooting Preparing Engine For Storage Storing MachineStoring Safely Preparing Machine for StorageRemoving Machine From Storage Electrical System SpecificationsDimensions Cutting Width mm 46 TiresMower Deck Recommended LubricantsLimited Warranty for NEW Scotts Brand Products WarrantyLimited Engine Warranty Tire WarrantyWarranted Parts To Secure Warranty Service Limited Battery WarrantyGrease IndexRemoving Mower Reverse Implement Option, Using Title Number Price Qty Total Service LiteratureOrder Form Page Page Call the Customer Communications Center Investment in QualityRefer to your operator’s manual Contact your dealer

S2546 specifications

The Scotts S2546 is an innovative lawn tractor that has been designed to provide homeowners with a reliable and efficient gardening solution. With a powerful 24 horsepower engine, this machine can manage various lawn care tasks, making it ideal for medium to large yards. It combines performance with ease of use, ensuring that even novice users can operate it effectively without prior experience.

One of the key features of the Scotts S2546 is its 46-inch cutting deck. This spacious deck allows for wider mowing paths, reducing the time spent on mowing and making it perfect for larger lawns. The cutting height can be easily adjusted through a simple lever, offering a range of heights from one to four inches. This flexibility helps users achieve the desired lawn appearance while promoting healthy grass growth.

The S2546 incorporates advanced technologies to enhance mowing performance. Its auto transmission system delivers a smooth driving experience, allowing users to adjust speed easily with just a push of the pedal. This feature provides optimal control while navigating through various terrains and obstacles in the yard. Additionally, the tight turning radius of this lawn tractor enables easy maneuverability around garden beds and trees.

Another standout characteristic of the Scotts S2546 is its user-friendly design. The comfortable high-back seat provides ample support, reducing fatigue during long mowing sessions. The intuitive control layout places all essential functions within easy reach, making it simple for users to maintain focus on their mowing tasks. Furthermore, the onboard storage compartments offer convenient space for tools and accessories, keeping everything organized and ready for use.

Safety features are also a priority in the S2546, with an automatic engine shut-off if the operator leaves the seat, preventing accidents. The durable construction of the tractor ensures that it can withstand the rigors of regular use, while the powder-coated finish protects against rust and weathering.

In summary, the Scotts S2546 lawn tractor stands out due to its robust engine, expansive cutting deck, and user-friendly design. With advanced technology, enhanced safety features, and a focus on comfort and control, it is a dependable choice for homeowners looking to maintain their lawns efficiently and effectively. Whether mowing, mulching, or bagging, the S2546 delivers an exceptional lawn care experience.
Top Page Image Contents