McIntosh C2200 owner manual How to Connect for Pass Thru Mode

Page 11

How to Connect for Pass Thru Mode

How to Connect for Pass Thru Mode

The PASS THRU Mode on the C2200 allows it to be part of a Multichannel System for the Left and Right Front Channels, when it is connected to a McIntosh Multichannel Processor such as the MX135.

Any of the C2200’s High Level Inputs may be used for the PASS THRU Function. The C2200 default setting for the PASS THRU feature needs to be changed in Setup.

Connect the basic system as outlined in the two previous pages and then add the two following connections. The ex- ample below uses the AUX Input for the PASS THRU Mode.

1.Connect a Power Control Cable from the McIntosh A/V Controller Power Control Zone A to the C2200 PASS THRU Jack.

2.Connect an Audio Cable from the McIntosh A/V Con- troller Zone A Front Left and Right Audio Outputs to the C2200 AUX 1 INPUTS.

McIntosh A/V Control Center

11

Image 11
Contents Tube Preamplifier Important Safety Instructions Please Take a Moment Customer ServiceTable of Contents Thank YouData Port Connector Connector InformationXLR Connectors Power Control and Trigger ConnectorsPerformance Features Introduction and Performance FeaturesSide View of the C2200 DimensionsFront View of the C2200 Rear View of the C2200Enclosed Custom Cabinet InstallationRear Panel Connections How to Connect for Power Control Amplifier Balanced Inputs How to Connect for Audio and Data ControlHow to Connect for Pass Thru Mode How to Connect for a Second Room Meter Lights Front Panel Controls, Displays, Push-Buttons, and SwitchesDisplay Brightness How to Operate the Setup ModeDefault Settings Setup Function Name SettingRe-Title Inputs SetupInput Trim Level Auto Tone Power Control TriggersRemote Control Selection Setup, con’t Pass Thru ModePower On Option Input Source Settings Setup, con’t Firmware VersionHow to Operate the C2200 Balance Control Pass Thru ModeReset of Microprocessors MonoOutput Meters How to Operate the C2200, con’tDefault Settings Remote Control Push-Buttons How to Operate by Remote Control Phono Circuitry Input and Output SwitchingVolume Control Circuitry Technical DescriptionOverall Design Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

C2200 specifications

The McIntosh C2200 is a high-fidelity vacuum tube preamplifier that exemplifies the brand's commitment to craftsmanship, performance, and timeless design. Known for its lush sound quality, the C2200 is a premier choice for audiophiles seeking to enhance their audio experience with the warmth and richness that only tube technology can provide.

At the heart of the C2200 is a sophisticated vacuum tube circuit design, which significantly contributes to its sonorous and immersive audio output. The preamp employs 12AX7A dual triode tubes in its audio signal path, ensuring that music is delivered with exceptional clarity and detail. The incorporation of these tubes results in a pleasing harmonic distortion that many listeners find desirable, making the C2200 an appealing option for those who prefer the analog sound characteristics.

One of the key features of the McIntosh C2200 is its dual-mono configuration. This design allows the left and right audio channels to operate independently, minimizing crosstalk and ensuring a more accurate soundstage. Incorporating technologies such as the McIntosh Autoformer, the C2200 ensures consistent quality across various load impedances, which is pivotal for optimal audio performance.

This preamplifier is equipped with a variety of inputs, including five line-level inputs, a phono input for both moving coil and moving magnet cartridges, and a home theater bypass for integration into a multi-channel audio system. This versatility ensures that the C2200 can accommodate various sources, from turntables to digital players.

The user-friendly interface of the C2200 features a remote control, allowing effortless adjustments to volume and source selection from the comfort of your listening position. The beautiful glass front panel, illuminated by the iconic McIntosh blue meters, adds a stunning visual component, making the preamp not only an audio device but also an elegant piece of décor.

In terms of build quality, the C2200 is constructed with a robust chassis and high-grade components. The power supply is well-regulated, minimizing noise and ensuring that the audio signal remains uncolored. Additionally, the proprietary McIntosh power guard circuit prevents distortion and damage, promising years of reliable service.

Overall, the McIntosh C2200 stands as a remarkable achievement in audio engineering, offering audiophiles a unique blend of vintage tube warmth, modern technology, and unparalleled build quality. Whether used in a dedicated listening room or as part of a more comprehensive audio system, the C2200 delivers an aural experience that satisfies even the most discerning listeners.