McIntosh C2200 owner manual Installation, Enclosed Custom Cabinet

Page 7
C2200
Side View in a
Partially Open
Custom Cabinet
C2200 Front Panel Custom Cabinet Cutout

Installation

Installation

The C2200 can be placed upright on a table or shelf, stand- ing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the C2200 when it is custom installed as outlined below. The four feet together with the mounting screws should be retained for possible future use if the C2200 is removed from the custom installation and used free standing. The required

panel cutout, ventilation cutout and unit dimensions are shown.

Always provide adequate ventilation for your C2200. Cool operation ensures the longest possible operating life for any electronic instrument. Do not install the C2200 directly above a heat generating component such as a high powered ampli- fier. If all the components are installed in a single cabinet, a

inches (5.08cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the A/V Control Center, so that airflow is not obstructed. Allow 19-1/2 inches (49.53cm) depth behind the front panel. Allow 1-1/8 inch (2.9cm) in front of the mounting panel for knob clear- ance. Be sure to cut out a ventilation hole in the mounting shelf according to the dimensions in the drawing.

17-1/16"

43.34cm

6 -5/8"

16.83cm

quiet running ventilation fan can be a definite asset in maintaining all the system components at the coolest possible operating tem- perature.

A custom cabinet installation should provide the following minimum spacing dimensions for cool operation. Allow at least 2

Enclosed Custom Cabinet

Cabinet

Front

Panel

Opening for Ventilation

Cutout Opening for Custom Mounting

2"

5.08cm

Ventilaton Fan

Warm Air

Output

Support

 

Cutout Opening for Ventilation

 

5-3/4"

Shelf

 

 

 

 

14.61cm

 

 

 

Chassis Spacers

Other Component

in Enclosed

Custom Cabinet

C2200

Side View

in Enclosed

Custom Cabinet

Cool Air

Input

Cutout Opening for Ventilation

Cutout Opening for Ventilation

Chassis

Spacers

Ventilaton Fan

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6-1/2"

 

 

 

 

 

 

 

 

 

 

 

 

 

C2200

 

 

 

16.51cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12"

 

 

Support Shelf in

 

 

Cutout

 

 

Custom Cabinet

 

 

Opening

30.48cm

 

 

 

 

for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ventilation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10-1/2"26.67cm

Notes: Center the Cutout Horitzonally on unit. For purposes of clarity, the above illustration is not drawn to scale.

13-1/4"

33.66cm

7

Image 7
Contents Tube Preamplifier Important Safety Instructions Please Take a Moment Customer ServiceTable of Contents Thank YouData Port Connector Connector InformationXLR Connectors Power Control and Trigger ConnectorsPerformance Features Introduction and Performance FeaturesSide View of the C2200 DimensionsFront View of the C2200 Rear View of the C2200Enclosed Custom Cabinet InstallationRear Panel Connections How to Connect for Power Control Amplifier Balanced Inputs How to Connect for Audio and Data ControlHow to Connect for Pass Thru Mode How to Connect for a Second Room Meter Lights Front Panel Controls, Displays, Push-Buttons, and SwitchesDisplay Brightness How to Operate the Setup ModeDefault Settings Setup Function Name SettingInput Trim Level SetupRe-Title Inputs Auto Tone Power Control TriggersPower On Option Setup, con’t Pass Thru ModeRemote Control Selection Input Source Settings Setup, con’t Firmware VersionHow to Operate the C2200 Balance Control Pass Thru ModeReset of Microprocessors MonoDefault Settings How to Operate the C2200, con’tOutput Meters Remote Control Push-Buttons How to Operate by Remote Control Phono Circuitry Input and Output SwitchingVolume Control Circuitry Technical DescriptionOverall Design Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

C2200 specifications

The McIntosh C2200 is a high-fidelity vacuum tube preamplifier that exemplifies the brand's commitment to craftsmanship, performance, and timeless design. Known for its lush sound quality, the C2200 is a premier choice for audiophiles seeking to enhance their audio experience with the warmth and richness that only tube technology can provide.

At the heart of the C2200 is a sophisticated vacuum tube circuit design, which significantly contributes to its sonorous and immersive audio output. The preamp employs 12AX7A dual triode tubes in its audio signal path, ensuring that music is delivered with exceptional clarity and detail. The incorporation of these tubes results in a pleasing harmonic distortion that many listeners find desirable, making the C2200 an appealing option for those who prefer the analog sound characteristics.

One of the key features of the McIntosh C2200 is its dual-mono configuration. This design allows the left and right audio channels to operate independently, minimizing crosstalk and ensuring a more accurate soundstage. Incorporating technologies such as the McIntosh Autoformer, the C2200 ensures consistent quality across various load impedances, which is pivotal for optimal audio performance.

This preamplifier is equipped with a variety of inputs, including five line-level inputs, a phono input for both moving coil and moving magnet cartridges, and a home theater bypass for integration into a multi-channel audio system. This versatility ensures that the C2200 can accommodate various sources, from turntables to digital players.

The user-friendly interface of the C2200 features a remote control, allowing effortless adjustments to volume and source selection from the comfort of your listening position. The beautiful glass front panel, illuminated by the iconic McIntosh blue meters, adds a stunning visual component, making the preamp not only an audio device but also an elegant piece of décor.

In terms of build quality, the C2200 is constructed with a robust chassis and high-grade components. The power supply is well-regulated, minimizing noise and ensuring that the audio signal remains uncolored. Additionally, the proprietary McIntosh power guard circuit prevents distortion and damage, promising years of reliable service.

Overall, the McIntosh C2200 stands as a remarkable achievement in audio engineering, offering audiophiles a unique blend of vintage tube warmth, modern technology, and unparalleled build quality. Whether used in a dedicated listening room or as part of a more comprehensive audio system, the C2200 delivers an aural experience that satisfies even the most discerning listeners.