McIntosh C2200 Important Information, Connector Information, XLR Connectors, Data Port Connector

Page 4
Pin 2
Pin 1
Pin 3

Important Information

1.The C2200 uses Vacuum Tubes for amplifying the audio signal. The C2200 is designed to have only qualified

Service Personnel perform any part(s) replacement including all the vacuum tubes.

2.For additional information on Audio Connections, refer to the Owner’s Manual(s) for the component(s).

3.Connecting Cables and Connectors are available from the McIntosh Parts Department:

Data and Power Control Cable Part No. 170-202

Six foot, shielded 2 conductor, with 1/8 inch stereo mini phone plug on each end.

4.The Main AC Power going to the C2200 and any other McIntosh Component(s) should not be applied until all the system components are connected together. When the C2200 and other McIntosh Components are in their Standby Power Off Mode, the Microprocessor’s Circuitry inside each component is active and communication is occurring between them. Failure to do so could result in malfunctioning of some or all of the system’s normal operations.

5.Up to four Sensors can be wired in parallel for Remote Control of the C2200 from other rooms.

6.Balanced and Unbalanced Inputs and Outputs can be mixed. For example, you may connect signal sources to Unbalanced Inputs and send signals from the Balanced Outputs. You can also use Balanced and Unbalanced Outputs simultaneously, connected to different Power Amplifiers.

7.A McIntosh Power Controller may be added to the C2200 to provide AC Power Switching to components that do not have Power Control Connections. See your McIntosh Dealer for additional information.

8.Sound Intensity is measured in units called Decibels and “dB” is the abbreviation.

9.The PHONO Circuitry uses four Vacuum Tubes. Those tubes are only Powered-On (glow coming from the tubes) when the AUX Input is re-titled to PHONO in the Setup Mode. Refer to page 15 “Re-Titled Inputs” for additional information.

Connector Information

XLR Connectors

Below is the Pin configuration for the XLR Balanced Input and Output Connectors on the C2200. Refer to the diagram for connection:

PIN 1: Shield/Ground

PIN 2: + Input

PIN 3: - Input

Power Control and Trigger Connectors

The C2200’s Power Control Outputs provide a 5 volt sig- nal. Use a 1/8 inch stereo mini

phone plug to connect to the

Positive

 

 

Power Control Input on other

N/C

McIntosh Components.

Ground

 

Data Port Connector

The C2200’s Data Port Output provides Remote Control

Signals. Use a 1/8 inch stereo mini

 

phone plug to connect to the Data Data Signal

Port Inputs on McIntosh Source

N/C

Units.

Ground

 

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Tube Preamplifier Important Safety Instructions Customer Service Table of ContentsThank You Please Take a MomentConnector Information XLR ConnectorsPower Control and Trigger Connectors Data Port ConnectorIntroduction and Performance Features Performance FeaturesDimensions Front View of the C2200Rear View of the C2200 Side View of the C2200Installation Enclosed Custom CabinetRear Panel Connections How to Connect for Power Control How to Connect for Audio and Data Control Amplifier Balanced InputsHow to Connect for Pass Thru Mode How to Connect for a Second Room Front Panel Controls, Displays, Push-Buttons, and Switches Meter LightsHow to Operate the Setup Mode Default SettingsSetup Function Name Setting Display BrightnessInput Trim Level SetupRe-Title Inputs Power Control Triggers Auto TonePower On Option Setup, con’t Pass Thru ModeRemote Control Selection Setup, con’t Firmware Version Input Source SettingsHow to Operate the C2200 Pass Thru Mode Reset of MicroprocessorsMono Balance ControlDefault Settings How to Operate the C2200, con’tOutput Meters Remote Control Push-Buttons How to Operate by Remote Control Input and Output Switching Volume Control CircuitryTechnical Description Phono CircuitryOverall Design Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

C2200 specifications

The McIntosh C2200 is a high-fidelity vacuum tube preamplifier that exemplifies the brand's commitment to craftsmanship, performance, and timeless design. Known for its lush sound quality, the C2200 is a premier choice for audiophiles seeking to enhance their audio experience with the warmth and richness that only tube technology can provide.

At the heart of the C2200 is a sophisticated vacuum tube circuit design, which significantly contributes to its sonorous and immersive audio output. The preamp employs 12AX7A dual triode tubes in its audio signal path, ensuring that music is delivered with exceptional clarity and detail. The incorporation of these tubes results in a pleasing harmonic distortion that many listeners find desirable, making the C2200 an appealing option for those who prefer the analog sound characteristics.

One of the key features of the McIntosh C2200 is its dual-mono configuration. This design allows the left and right audio channels to operate independently, minimizing crosstalk and ensuring a more accurate soundstage. Incorporating technologies such as the McIntosh Autoformer, the C2200 ensures consistent quality across various load impedances, which is pivotal for optimal audio performance.

This preamplifier is equipped with a variety of inputs, including five line-level inputs, a phono input for both moving coil and moving magnet cartridges, and a home theater bypass for integration into a multi-channel audio system. This versatility ensures that the C2200 can accommodate various sources, from turntables to digital players.

The user-friendly interface of the C2200 features a remote control, allowing effortless adjustments to volume and source selection from the comfort of your listening position. The beautiful glass front panel, illuminated by the iconic McIntosh blue meters, adds a stunning visual component, making the preamp not only an audio device but also an elegant piece of décor.

In terms of build quality, the C2200 is constructed with a robust chassis and high-grade components. The power supply is well-regulated, minimizing noise and ensuring that the audio signal remains uncolored. Additionally, the proprietary McIntosh power guard circuit prevents distortion and damage, promising years of reliable service.

Overall, the McIntosh C2200 stands as a remarkable achievement in audio engineering, offering audiophiles a unique blend of vintage tube warmth, modern technology, and unparalleled build quality. Whether used in a dedicated listening room or as part of a more comprehensive audio system, the C2200 delivers an aural experience that satisfies even the most discerning listeners.
Top Page Image Contents