McIntosh C2200 owner manual Mono, Balance Control, Mute, Output 1, Meter Lights, Pass Thru Mode

Page 20

Mono

Press the MONO Mode Push-button to combine Left and Right Stereo Signals to Mono, for the MAIN, OUTPUTs 1&2 and the HEADPHONES Jack. The MODE Push-but- ton on the Remote Control also can be used to switch be- tween the Stereo and Mono Modes of Operation.

Note: The TAPE/REC Outputs are not effected by the Mono Mode of Operation.

Balance Control

Adjust the BALANCE Control as needed to achieve ap- proximately equal listening volume levels in each Loud- speaker. Rotate the BALANCE Control clockwise to em- phasize the Right Channel by reducing the volume level of the Left Channel. Refer to figure 27.

Figure 27

Several seconds after the rotation of the BALANCE Con- trol has stopped, the Front Panel Alphanumeric Display will once again indicate the Input Source and Volume together with the “>” symbol to show that the Right Channel is now louder than the Left Channel. Refer to figure 28.

Figure 28

Rotate the BALANCE Control counterclockwise to deemphasize the Right Channel until equal Balance of both Channels is achieved. Refer to figure 29.

Figure 29

Mute

Press the MUTE Push-button to Mute the Audio at the MAIN, OUTPUTS 1 & 2 and HEADPHONES Outputs. The Front Panel Alphanumeric Display will indicate the In- put Source Name followed by the word MUTE in place of the actual volume setting. Refer to figure 30.

Figure 30

Setup

Pressing the SETUP Push-button activates the Setup Mode of the C2200 and allows customizing various operating functions. Refer to page 14 for additional information.

Output 1 and 2

Press OUTPUT 1 or 2 Push-buttons to send audio to sepa- rate Power Amplifiers connected to the rear panel OUT- PUTS 1 or 2. It also activates the POWER CONTROL 1 &2 Sockets on the rear panel of the C2200. Press either Push-button individually or both together.

Meter Lights

Rotate the METER LIGHTS Control counterclockwise to switch Off the Meter Illumination and rotate the control clockwise to switch On the Meter Illumination.

Note: It is normal for the brightness of the Front Panel Alphanumeric Display to dim when the Meter Illumination is switched Off. Refer to page 14 for additional information.

Pass Thru Mode

When the C2200 is connected together with a McIntosh Multichannel A/V Control Center or Surround Decoder and has the PASS THRU MODE activated, it will automatically Turn-On whenever the A/V Control Center or Surround De- coder is switched On. It will indicate on the Front Panel Al- phanumeric Display “PASSTHRU”. Refer to figure 31.

Figure 31

In the PASS THRU Mode, the OUTPUTS 1&2 Push- buttons remain active. The remaining C2200 Front Panel Controls and Push-buttons are deactivated as long as the C2200 is in the PASS THRU MODE.

Note: The C2200 Preamplifier remembers separately, the setting of the OUTPUTS 1&2 Push-buttons when in the Pass Thru Mode.

Reset of Microprocessors

In the event that the controls of the C2200 stop functioning, push the POWER switch OFF and wait about two minutes. Then push the POWER switch ON followed by pushing the STANDBY/ON Push-button. This will reset the C2200 mi- croprocessors and the Preamplifier should be functioning normally.

Note: The above condition is usually caused by either interruptions in AC power and/or major changes that may occur in AC power line voltage.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Tube Preamplifier Important Safety Instructions Customer Service Table of ContentsThank You Please Take a MomentConnector Information XLR ConnectorsPower Control and Trigger Connectors Data Port ConnectorIntroduction and Performance Features Performance FeaturesDimensions Front View of the C2200Rear View of the C2200 Side View of the C2200Installation Enclosed Custom CabinetRear Panel Connections How to Connect for Power Control How to Connect for Audio and Data Control Amplifier Balanced InputsHow to Connect for Pass Thru Mode How to Connect for a Second Room Front Panel Controls, Displays, Push-Buttons, and Switches Meter LightsHow to Operate the Setup Mode Default SettingsSetup Function Name Setting Display BrightnessRe-Title Inputs SetupInput Trim Level Power Control Triggers Auto ToneRemote Control Selection Setup, con’t Pass Thru ModePower On Option Setup, con’t Firmware Version Input Source SettingsHow to Operate the C2200 Pass Thru Mode Reset of MicroprocessorsMono Balance ControlOutput Meters How to Operate the C2200, con’tDefault Settings Remote Control Push-Buttons How to Operate by Remote Control Input and Output Switching Volume Control CircuitryTechnical Description Phono CircuitryOverall Design Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

C2200 specifications

The McIntosh C2200 is a high-fidelity vacuum tube preamplifier that exemplifies the brand's commitment to craftsmanship, performance, and timeless design. Known for its lush sound quality, the C2200 is a premier choice for audiophiles seeking to enhance their audio experience with the warmth and richness that only tube technology can provide.

At the heart of the C2200 is a sophisticated vacuum tube circuit design, which significantly contributes to its sonorous and immersive audio output. The preamp employs 12AX7A dual triode tubes in its audio signal path, ensuring that music is delivered with exceptional clarity and detail. The incorporation of these tubes results in a pleasing harmonic distortion that many listeners find desirable, making the C2200 an appealing option for those who prefer the analog sound characteristics.

One of the key features of the McIntosh C2200 is its dual-mono configuration. This design allows the left and right audio channels to operate independently, minimizing crosstalk and ensuring a more accurate soundstage. Incorporating technologies such as the McIntosh Autoformer, the C2200 ensures consistent quality across various load impedances, which is pivotal for optimal audio performance.

This preamplifier is equipped with a variety of inputs, including five line-level inputs, a phono input for both moving coil and moving magnet cartridges, and a home theater bypass for integration into a multi-channel audio system. This versatility ensures that the C2200 can accommodate various sources, from turntables to digital players.

The user-friendly interface of the C2200 features a remote control, allowing effortless adjustments to volume and source selection from the comfort of your listening position. The beautiful glass front panel, illuminated by the iconic McIntosh blue meters, adds a stunning visual component, making the preamp not only an audio device but also an elegant piece of décor.

In terms of build quality, the C2200 is constructed with a robust chassis and high-grade components. The power supply is well-regulated, minimizing noise and ensuring that the audio signal remains uncolored. Additionally, the proprietary McIntosh power guard circuit prevents distortion and damage, promising years of reliable service.

Overall, the McIntosh C2200 stands as a remarkable achievement in audio engineering, offering audiophiles a unique blend of vintage tube warmth, modern technology, and unparalleled build quality. Whether used in a dedicated listening room or as part of a more comprehensive audio system, the C2200 delivers an aural experience that satisfies even the most discerning listeners.
Top Page Image Contents