McIntosh C2200 owner manual How to Operate the Setup Mode, Default Settings, Display Brightness

Page 14

How to Operate the Setup Mode

Your McIntosh C2200 has been factory configured for de- fault operating settings that will allow immediate enjoyment of superb audio without the need for further adjustments. If you wish to make changes to the factory default settings, a Setup Feature is provided to customize the operating set- tings using the Front Panel Alphanumeric Display.

1.Press the POWER Switch to ON, the Red LED above the STANDBY/ON Push-button lights to indicate the C2200 is in Standby mode. To switch On the C2200 press the STANDBY/ON Push-button and wait until the tube warmup period is over. Refer to figure 3.

2.Press the C2200 Front Panel SETUP Push-button. The LED above the SETUP Push-button will illuminate and the Front Panel Display will indicate DISPLAY 20. Re- fer to figure 1.

Note: The Front Panel Display will indicate DISPLAY 20 the first time, after then it will display whatever Setup Mode was last accessed.

Figure 1

3.Rotate the Front Panel METER LIGHTS (Menu) Con- trol and notice that the Setup Mode advances through eight different possible adjustment selections and one informational display.

4.To exit from a specific Setup Mode, press the SETUP Push-button a second time. The LED above the SETUP Push-button will extinguish and the Front Panel Display will revert back to its normal display. Refer to figure 2.

Figure 2

Default Settings

The following listings indicate the default settings and the page number for instructions on how to change a setting.

Setup Function Name

Setting

Page Number

Alphanumeric Display Brightness:

 

 

Meters Illumnation On

20

14

Meters Illumnation Off

5

14

Trim (Input Level)

00

14

Input Titles

-

14

Triggers

Off

16

Auto Tone

Off

16

Pass Thru (Multichannel)

Off

16

Power On

-

16

Remote (Control Type)

Norm

17

Version (C2200 Firmware)

_ . _ _

17

Display Brightness

The Front Panel Alphanumeric DISPLAY Brightness may be varied from a setting of 1(Dim) to 31(Bright) with two settings, one with the Meter Illumination On and the other with the Illumination Off. Follow the steps below for chang- ing the brightness. Refer to figure 4.

Figure 4

1.Press the SETUP Push-button to access the Setup Mode.

2.Rotate the Front Panel METER LIGHTS (Menu) Con- trol until the word DISPLAY 20 appears.

3.Rotate the BALANCE (Select) Control until the desired Display Brightness is achieved. This sets the Brightness Level with the Meters Illumination On.

Figure 3

14

Image 14
Contents Tube Preamplifier Important Safety Instructions Thank You Customer ServiceTable of Contents Please Take a MomentPower Control and Trigger Connectors Connector InformationXLR Connectors Data Port ConnectorIntroduction and Performance Features Performance FeaturesRear View of the C2200 DimensionsFront View of the C2200 Side View of the C2200Installation Enclosed Custom CabinetRear Panel Connections How to Connect for Power Control How to Connect for Audio and Data Control Amplifier Balanced InputsHow to Connect for Pass Thru Mode How to Connect for a Second Room Front Panel Controls, Displays, Push-Buttons, and Switches Meter LightsSetup Function Name Setting How to Operate the Setup ModeDefault Settings Display BrightnessRe-Title Inputs SetupInput Trim Level Power Control Triggers Auto ToneRemote Control Selection Setup, con’t Pass Thru ModePower On Option Setup, con’t Firmware Version Input Source SettingsHow to Operate the C2200 Mono Pass Thru ModeReset of Microprocessors Balance ControlOutput Meters How to Operate the C2200, con’tDefault Settings Remote Control Push-Buttons How to Operate by Remote Control Technical Description Input and Output SwitchingVolume Control Circuitry Phono CircuitryOverall Design Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

C2200 specifications

The McIntosh C2200 is a high-fidelity vacuum tube preamplifier that exemplifies the brand's commitment to craftsmanship, performance, and timeless design. Known for its lush sound quality, the C2200 is a premier choice for audiophiles seeking to enhance their audio experience with the warmth and richness that only tube technology can provide.

At the heart of the C2200 is a sophisticated vacuum tube circuit design, which significantly contributes to its sonorous and immersive audio output. The preamp employs 12AX7A dual triode tubes in its audio signal path, ensuring that music is delivered with exceptional clarity and detail. The incorporation of these tubes results in a pleasing harmonic distortion that many listeners find desirable, making the C2200 an appealing option for those who prefer the analog sound characteristics.

One of the key features of the McIntosh C2200 is its dual-mono configuration. This design allows the left and right audio channels to operate independently, minimizing crosstalk and ensuring a more accurate soundstage. Incorporating technologies such as the McIntosh Autoformer, the C2200 ensures consistent quality across various load impedances, which is pivotal for optimal audio performance.

This preamplifier is equipped with a variety of inputs, including five line-level inputs, a phono input for both moving coil and moving magnet cartridges, and a home theater bypass for integration into a multi-channel audio system. This versatility ensures that the C2200 can accommodate various sources, from turntables to digital players.

The user-friendly interface of the C2200 features a remote control, allowing effortless adjustments to volume and source selection from the comfort of your listening position. The beautiful glass front panel, illuminated by the iconic McIntosh blue meters, adds a stunning visual component, making the preamp not only an audio device but also an elegant piece of décor.

In terms of build quality, the C2200 is constructed with a robust chassis and high-grade components. The power supply is well-regulated, minimizing noise and ensuring that the audio signal remains uncolored. Additionally, the proprietary McIntosh power guard circuit prevents distortion and damage, promising years of reliable service.

Overall, the McIntosh C2200 stands as a remarkable achievement in audio engineering, offering audiophiles a unique blend of vintage tube warmth, modern technology, and unparalleled build quality. Whether used in a dedicated listening room or as part of a more comprehensive audio system, the C2200 delivers an aural experience that satisfies even the most discerning listeners.