MTD 616 warranty Engaging the Parking Brake, Setting the Cutting Height, Starting the Engine

Page 16

4

Operating

Your Lawn

Tractor

WARNING

Keep hands and feet away from the discharge opening of the cutting deck.

Do not operate the tractor if the interlock system is malfunctioning. This system was designed for your safety and protection.

Use extreme caution while operating the tractor in the

REVERSE CAUTION MODE. Always look down and behind before and while backing. Do not operate the tractor when children or others are around. Stop the tractor im- mediately if someone enters the area.

 

2EVERSE

)NDICATOR

0USH "UTTON

,IGHT

2EVERSE

3TOP

#AUTIONT-ODE

0OSITION

0OSITION

 

 

3TART

 

0OSITION

Figure 4-5

2.Turn the key from the NORMAL MOWING (Green) position to the REVERSE CAUTION MODE (Yellow) position of the key switch module. See Figure 4-5.

3.Depress the REVERSE PUSH BUTTON (Orange, Triangular Button) at the top, right corner of the key switch module. The red indicator light at the top, left corner of the key switch module will be ON while activated. See Figure 4-5.

4.Once activated (indicator light ON), the tractor can be driven in reverse with the cutting blades (PTO) engaged.

5.Always look down and behind before and while backing to make sure no children are around.

6.After resuming forward motion, return the key to the NORMAL MOWING position.

IMPORTANT: The REVERSE CAUTION MODE will remain activated until:

a.The key is placed in either the NORMAL MOW- ING position or STOP position.

b.The operator leaves the seat (Models with Electric PTO ONLY).

c.The operator engages the parking brake by fully depressing the brake pedal and holding it down while gently pushing the parking brake button inward (Models with Manual PTO ONLY).

Engaging the Parking Brake

To engage the parking brake:

1.Fully depress the brake pedal and hold it down with your foot while gently pushing the parking brake button inward.

2.Hold the parking brake button in while removing your foot from the brake pedal.

3.Once engaged, the parking brake button and the brake pedal will lock in the “down” position.

To disengage the parking brake:

1. Slightly depress the brake pedal.

NOTE: The parking brake must be engaged if the operator leaves the seat with the engine running or the engine will automatically shut off.

WARNING

AVOID SERIOUS INJURY OR DEATH

•GO UP AND DOWN SLOPES, NOT ACROSS.

•AVOID SUDDEN TURNS.

•DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIP.

•IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK DOWNHILL SLOWLY.

•DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.

•NEVER CARRY CHILDREN, EVEN WITH BLADES OFF.

•LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.

•KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES) IN PLACE AND WORKING.

•REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).

•KNOW LOCATION AND FUNCTION OF ALL CONTROLS.

•BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLACING HANDS OR FEET NEAR BLADE(S).

•BEFORE LEAVING OPERATOR’S POSITION, DISENGAGE BLADE(S), PLACE THE SHIFT LEVER IN NEUTRAL, ENGAGE BRAKE LOCK, SHUT ENGINE OFF AND REMOVE KEY.

READ OPERATOR’S MANUAL

Setting the Cutting Height

1.Select the height position of the cutting deck by placing the deck lift lever in any of the six different cutting height notches on the right side of the fender.

2.Adjust the deck wheels so that they are between ¼-inch and ½-inch above the ground when the tractor is on a smooth, flat surface such as a driveway.

WARNING: Keep hands and feet away from the discharge opening of the cutting deck.

NOTE: The deck wheels are an anti-scalp feature of the deck and are not designed to support the weight of the cutting deck.

Refer to Leveling the Deck on page 20 of this manual for more detailed instructions regarding various deck adjustments.

Starting the Engine

WARNING: Do not operate the tractor if the interlock system is malfunctioning. This system was designed for your safety and protection.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Table of Contents Slope Gauge Use only an approved gasoline container Replace gasoline cap and tighten securelyGeneral Operation This manual and on the machine Slope Operation Never allow children or others in or on towed equip- mentService Setting Up Your Lawn Tractor Attaching the Battery CablesGas and Oil Fill-up Remove the hex bolt and wing nut from the negative cableShipping Brace Removal Attaching The Steering WheelStandard Adjustment Seat Quick Adjustment SeatKnob Adjustment Seat Attaching The SeatIdentifying the Mulch Plug If so equippedOperating Your Lawn Tractor Brake PedalIgnition Switch Module Throttle Control LeverChoke Control Brake PedalSystems Indicator Monitor If Equipped Seat Adjustment Lever If EquippedElectric PTO Blade Engage PTO Blade Engage LeverSafety Interlock Switches Reverse Caution ModeDeck Lift Lever Parking Brake ButtonEngaging the Parking Brake Setting the Cutting HeightStarting the Engine Stopping the Engine Driving The TractorDriving On Slopes Drive PedalSetting The Cruise Control Using the Deck Lift LeverMoving the Tractor Manually Engaging the BladesHeadlights MowingMulching If Equipped Adjusting Your Lawn Tractor Leveling the DeckFront To Rear Side to SideParking Brake Adjustment Seat AdjustmentSteering Adjustment Quick Adjust Seat If so equippedCleaning the Engine And Deck Maintaining Your Lawn TractorKohler Single Shown EngineCutting Deck Removal Deck Wash System If equippedMove the tractor’s PTO Blade Engage into the OFF position Repeat steps 4-11 on the opposite side of the cutting deckBattery TiresCutting Blades FusesChanging the Transmission Drive Belt Changing the Deck BeltChanging the Lower Deck Belt 46 Decks Belt Cover Rear Wheel Weight Kit For an extended period Storing your tractorInch Two-stage Snow Thrower Inch Deck Mulch KitYour Responsibility Spark plug wires loose Clean pre-cleaner, if so equippedHousing Wide Dirty air cleanerWarranty 06.18.06Drive Belt Transmission 734-1731

616 specifications

The MTD 616 is a versatile and powerful ride-on mower that stands out in the landscaping equipment market due to its robust design and innovative technologies. This machine is particularly well-suited for residential and light commercial users, offering an exceptional combination of performance, comfort, and efficiency.

One of the main features of the MTD 616 is its durable build quality. A strong steel frame ensures the mower can withstand demanding conditions, while a wide cutting deck allows for efficient mowing of larger areas. The mower typically features a 42-inch deck, which strikes a perfect balance between cutting width and maneuverability, making it ideal for both open lawns and more confined spaces.

The MTD 616 is powered by a reliable engine, usually a gas-powered unit, providing sufficient torque and power to handle various grass types and terrains. This ensures that users can tackle thick grass and uneven ground without issues. The mower's transmission system is designed for smooth operation, often featuring an automatic or hydrostatic transmission that enables seamless speed adjustments while mowing.

In terms of user comfort, the MTD 616 is equipped with an ergonomic seat and intuitive controls, making it easy for operators to navigate and operate the mower efficiently. The machine's adjustable cutting height allows users to customize their mowing experience, accommodating different grass lengths and varying seasonal growth patterns.

Additionally, the MTD 616 highlights advanced technologies aimed at enhancing functionality. Some models incorporate a mulching feature, which helps in returning cut grass to the lawn as nutrient-rich mulch, promoting healthier growth. Other models may offer bagging options for easy collection of clippings, keeping the lawn tidy.

Safety is an important consideration, and the MTD 616 typically includes features such as a blade brake that stops the mower blades when the operator leaves the seat, ensuring greater safety during operation. Furthermore, its compact design and tight turning radius enhance maneuverability, making it suitable for navigating around landscaping features and garden beds.

Overall, the MTD 616 stands out as a formidable choice for users seeking a reliable and efficient ride-on mower. Its combination of robust construction, advanced features, and user-friendly design positions it as an excellent investment for maintaining a beautiful and well-manicured lawn. Whether it’s for homeowners or light commercial use, the MTD 616 offers the performance and versatility needed for effective grass management.
Top Page Image Contents