Names and Functions, When AMP mode is selected

!8 AUDIO IN/OUT (CD, TAPE, CD-R, TV, DVD, VCR1, DSS/VCR2)

These are the analog audio inputs and outputs. There are 7 audio inputs (4 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players, DVD players and etc.... The audio inputs and outputs

require RCA-type connectors.

!9 DIGITAL INPUT (Dig.1 - 6) / OUTPUT (coaxial, optical)

REMOTE CONTROLLER

RC1400

NAMES AND FUNCTIONS

zInfrared Transmitter and Learning

Sensor

This transmitter emits infrared light. Press the buttons while pointing the transmitter towards the infrared receiver window of the SR8400 or other AV equipment. Be sure to also point towards other remote controls when using the learning function.

xPOWER ON and OFF buttons

(When AMP mode is selected)

These buttons are used to turn the SR8400 on or off.

ENGLISH

These are the digital audio inputs and outputs. There are 3 digital inputs with coaxial jacks, 3 with optical jacks.

The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component.

For digital output, there is 1 coaxial output and 1 optical output.

The digital outputs can be connected to MD recorders, CD recorders, DAT decks, or other similar components.

¤1

¤0

⁄9

⁄8

⁄7

⁄6

POWER

OFF	ON/OFF	ON
	SOURCE
		M
		D1
		D2
		D3
		D4
		D5
CH		VOL
	OK
PREV		MUTE
	GUIDE
MENU		EXIT
TEST	CH.SEL	SURR
1	2	3
7.1CH	ATT	SPK-AB
4	5	6
DISP	OSD	SLEEP
7	8	9
CLEAR	0	MEMO

TV	DVD	VCR	DSS
TUNER	CD	CD-R	MD
TAPE	AUX1	AUX2	AMP
		LIGHT
1			2
		RC1400
	Learning Remote Controller

c v

⁄0

⁄1

⁄2

⁄3

⁄4

⁄5

cSOURCE ON/OFF button

This button is used to turn a specific source (such as a DVD player) on or off independently from the rest of the system.

vM (Mode) button

This button is used to program Macros. Pressing this button switches between Normal mode and Macro mode.

The > button is used to move to the next page. Up to 20 programs (4 pages) can be made. Holding down the M button for three seconds or more switches to the Setup mode, where the Setup menu is shown on the LCD. The Setup menu has four pages, and the > button is used to move to the next page. Pressing the > button from page 4 returns you to page 1.

bD1 to D5 (Direct) buttons

Five types of direct operations can be performed for each of the 12 source buttons such as the DVD, television, amplifier, and other AV equipment. The pages can be switched, so 4 pages x 5 types = 20 operations can be performed for a single source. The text display can also be changed.

n> (Page) button

This button is used to switch pages for the Direct button. The current page is shown on the LCD.

mVOL (Volume) button

This button is used to adjust the volume for the amplifier and television.

Note:

•Set the AMP mode to use this button with the SR8400.