Marantz SR8400 manual LCD Indicators

Page 11

ENGLISH

,MUTE button

This button is used to mute the audio for the SR8400 and television.

Note:

(8) OSD button

When this button is pressed, the current setting are displayed on the TV monitor.

(9) SLEEP (sleep timer) button

⁄8PREV (Previous) button

This button is used to return to the previous channel on the television or other device.

Note:

LCD INDICATORS

Information about currently selected source and direct code names are displayed on the LCD.

•Set the AMP mode to use this button with the SR8400.

.GUIDE button

This button is used to display the menus for the DVD player, DSS (satellite broadcasting tuner), or other AV equipment.

⁄0EXIT button

(when AMP mode is selected)

This button is used to cancel settings in the setup menu.

⁄1Numeric buttons

These buttons are used to switch between 0 to 9 of the source components. If the source is set to the

This button is used for setting the sleep timer. It can be operated the same way as the button in unit.

⁄2MEMO button

This button is used to store settings to memory or program a source.

⁄3CONTROL button

Thses buttons are used when operating the PLAY, STOP, PAUSE, and other commands of a source.

Note:

•This button is unavailable for the SR8400.

⁄4SOURCE button

Thses buttons are used to switch the source of

•This button is unavailable for SR8400.

⁄9CH (Channel) button

This is used to change channels.

¤0CURSOR buttons

These buttons are used when controlling the cursor of the SR8400, DVD, or other AV equipment.

¤1LCD

Information about the sources and modes are shown on the LCD.

J

I H

G

F E

LEARN

NAME

MACRO

USE

A

B

PAGE 1 2 3 4 C

D

amplifier, these buttons are used to perform operations.

(when AMP mode is selected)

(1) TEST button

Used to enter the test tone menu.

(2) CH SEL. (channel select) button

Used to call up SETUP MAIN MENU and adjust speaker levels or 7.1 ch input level.

(3)SURR (surround) button Used to select the surround mode.

(4)7.1CH IN button

Press this button to select the output of an external multi channel decoder.

(5) ATT button

When the input signal is too high and the voice dis- torts even by throttling the SR8400 VOLUME con- trol, turn on this function. “ATT” is indicated when this function is activated.

The input level is reduced. Attenuator is invalid for use with the output signal of “REC OUT”.

Note:

•This function is unavailable during the digital input is selected.

(6)SPK-AB button

Speaker mode is switched in the following sequence.

A → B → A+B → off

(7) DISP. button

Selects the display mode for the front display of the SR8400.

your A/V Receiver / amplifer. Each time a source button is pressed, the remote control changes to the source which was pressed.

This remote control can control 12 types of equipment. To change the A/V Receiver / amplifier source, press this button twice within two seconds. The signal is sent when it is pressed the second time.

Note:

•Select the AMP as the source to use this remote controll with the SR8400.

⁄5LIGHT 1 and 2 buttons

Pressing these buttons will light up the LCD and its buttons. This lighting time can be set. If the lighting time is set to 0 seconds, the backlight turns on only while this button is pressed. The operations for LIGHT 1 and 2 are identical.

⁄6CLEAR button

This button is used to erase the memory or program of a source.

⁄7MENU button

(when AMP mode is selected)

This button is used to call up the SETUP MAIN MENU of the SR8400.

ASource Name indicator

This displays the name of the selected source, such as DVD, television, or other AV equipment (up to five characters).

BDirect Button Name indicator

This displays up to 20 types of button names for each source. (up to six characters)

CPage indicator

This displays the current page position.

DTransmission indicator

This lights up when the remote control is sending a signal.

EUSE indicator

This is displayed under normal operation.

FBattery Level indicator

This is displayed when the battery level is low.

GTIMER indicator

This is displayed when the macro timer is set.

HMACRO indicator

This is displayed when the remote control is in macro programming mode.

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model SR8400 User Guide Cloth for cleaning Cleaning Unplug this product from the wallOutlet before cleaning. Do not use liquid Cleaners or aerosol cleaners. Use a dampPower Lines An outside antenna system Power-Cord Protection Power-supply cordsProduct during a lightning storm, or when it is Lightning and power-line surgesPrecautions Table of Contents IntroductionAbout Dolby Pro Logic DescriptionRemote Controller RC1400 FeaturesAccessories Input Function Selector Front PanelPCM FL DisplaySBR, C Rear PanelDigital Input Dig.1 6 / Output coaxial, optical When AMP mode is selectedNames and Functions Audio IN/OUT CD, TAPE, CD-R, TV, DVD, VCR1, DSS/VCR2LCD Indicators Loading Batteries Remote Control RangeBattery Replacement Interval Safety Precautions for BatteriesGeneral Information of RC1400 Setting the TimeConnections Speaker PlacementConnecting Speakers Insert the banana plug Connecting Audio ComponentsBanana plug connections are also possible Tighten the knob by turning clockwise and thenComponent jack Connecting Video ComponentsThere are 3 types of video jacks on the rear panel Video jackConnecting AN External Power Amplifier Connecting the Remote Control JacksConnecting Multi Channel Audio Source Place the antenna on stable surface Connecting the Antenna TerminalsConnecting the supplied AM loop antenna Multiroom Connecting for the Multi RoomOn Screen Display Menu System SetupYES Speaker SetupLarge SmallPreference Multi Room SurroundPL II PRO Logic II Music Parameter CS II Circle Surround ParameterCH Input Level DC Trigger SetupVideo Convert Selecting the Surround ModeAdjusting the Tone Bass Treble Control Basic OperationDolby Digital Surround ModeUsing the Sleep Timer Temporarily Turning OFF SoundNeo6 Cinema, Neo6 Music This mode bypasses all surround processingDTS-ES Discrete 6.1, Matrix Dts, Neo6 Cinema, Neo6 MusicSBL Other Function AUX2 Input Recording AN Analog SourceSpeaker A/B HT-EQ CH InputListening to the Tuner Preset MemoryUsing the SR8400 Using the remote control unit Basic Operation Tuner← Down System Multi Room Playback Using Multi Speaker TerminalsMulti Room Playback Using Multi RoomControlling Marantz Components Remote Controller OperationControlling a Marantz VCR VCR Mode Turns the CD recorder on and off Press the buttons to operate the DVD When operating non-Marantz AV equipment productsBasic Operation Normal operation statusCodes from the initial settings, or remote codes This remote control is capable of learningStoring codes used by other remote controls that Control will transmit either the Marantz presetErasing direct buttons Erasing buttonsProgramming Macros Repeat steps 6 and 7, and then enter V, I, E Press the D3 Name direct buttonPress the 5 numeric button to select M Press Cursor button to nextTransmitting remote control Clone ModeReceiving remote control Adjusting the Display Contrast SetupSetting the Lighting Time Setting the Macro Interval TimeSymptom Cause Remedy TroubleshootingGeneral Malfunction Memory backupTechnical Specifications Dimensions Source button name AMP, Tuner Setup CodesSource button name AMP Source button name TV Source button name TapeSource button name AUX2 Source button name CD, CDR, MDIii Source button name TV Source button name VCR VCRSTS Source button name DVDSource button name CDR FunctionsSource button name Tuner Source button name CD06BW851250 Japan
Top Page Image Contents