Multiquip GBS, GBWE, BGMP, GBHM, GBP Periodic Check and Maintenance, Part, Check Item, Solution

MAINTENANCE

Table 7. Periodic Check and Maintenance

FIGURE			PART		CHECK ITEM			SOLUTION
	L1	Lamp (Base)		Lamp base loose?			Screw in securely.		•
	L2	Connector		Cable disconnected or loose?			Connect securely.		•
Lamp	L3	Lamp Holder		Lamp holder loose?			Replace.		#
	L4	Pipe Frame		Pipe Frame skewed			Replace.		&
	L5	Lamp		Defective lamp?			Replace.		•
	B1	Balloon (Envelope)		Defective or dirty?			Replace.		•
	B2	Zipper		Broken?			Replace.		•
Balloon	B3	Fan Motor (Blower)		Not working properly?			Repair or replace.		$
	B4	Buckle		Broken?			Replace.		$
	B5	T-handle bolt (balloon)		Broken?			Replace.		•
	P1	Pentapod		Damaged or Not Working Properly?			Replace.		#
Pentapod	P2	Mast		Damaged or Not Working Properly?			Replace.		#
	P3	Latch		Damaged?			Replace.		•
	P4	Stopper		Damaged?			Replace.		•
Electric	E1	Power cable		Defective or worn cable?			Replace.		•
	E2	Plug		Damaged?			Replace.		#
	S1	Clamp		Damaged?			Replace.		•
Offset Pole	S2	Straight Pole		Damaged or Skewed?			Replace.		$
	S3	Offset Pole		Damaged or Skewed?			Replace.		$
	S4	Knob		Loose?			Tighten Securely.		•
• — Check daily			# — Every 20 hours			$ — Every 100 hours		& — Every 500 hours

GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 31