OPERATION
RAISING THE MAST (GBW/GBWE)
DANGER
ALWAYS make sure the area above the lighting system is open and clear of overhead power lines and other obstructions. Contact with overhead power lines or other obstructions could result in equipment damage, electrical
shock, electrocution and even death.
CAUTION
When raising or lowering the mast, keep hands and
fingers clear of the mast sections to prevent hand and
fingers from getting pinched.
1.Raise the second mast to the desired height and tighten the
SECOND
MAST
Figure 23. Raising the Second Mast
2.To raise the mast higher, raise the third mast until the lock/release tab pops out. The tab will automatically rest on the second mast. See Figure 24.
THIRD
MAST LOCK/
RELEASE
TAB
Figure 24. Raising the Third Mast
LOWERING THE MAST (GBW/GBWE)
1.Loosen the
SECOND
MAST
Figure 25. Lowering Second Mast
2.Push the lock/release tab on the third mast to release it and lower third mast. See Figure 26.
LOCK/
THIRD RELEASE
MAST TAB
Figure 26. Lowering Third Mast
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 23