GUIDE CHANNEL SET
GUIDE CH: 12
VCR CH : –––
PRESS NUMBER KEY (0–9)
OR (5,), THEN (OK)
PRESS (PROG.) TO END

4

Input receiving channel number

The guide channel number, which is

assigned to the TV or cable station for the

PlusCode number that you entered in step 3, will appear automatically on the Guide Channel Set screen.

Press the Number keys (or CH +/– or %fi) to input the number of the channel on which the broadcast for the PlusCode number is received on the VCR or cable box, then press OK.

The Guide Channel Set screen appears only when you input the PlusCode number of a station for which the guide channel number has not been set previously.

If you receive your channels with a cable box and if you have properly set your Controller, “CABLE CH” appears in place of “VCR CH”. If

5not, refer to pages 16 – 19.

EN 39

7Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs.

See “When programs overlap each other” on

8page 45.

Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “‰” is displayed on the front display panel.

To use the VCR while it is in timer recording standby mode

Check program date

The PlusCode number you entered and the corresponding timer recording program is displayed on the Program screen. Check to make sure it is accurate.

PROGRAM 1

(PLUSCODE NO. 12345678)

START

STOP

8:00PM

= 10:00PM

DATE

CH

12/24/00

12 SP

SUN

 

PRESS (8=DAILY, 9=WEEKLY STOP+/– = STOP TIME, SP/EP)

PRESS (PROG.) TO END

Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcasts you want.

When “AUTO TIMER” ( pg. 57) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

To change the stop time, press STOP +/–.

To timer-record daily (Monday–Friday) or weekly serials, press DAILY (M-F)(number “8”) or WEEKLY (number “9”). “DAILY” or “WEEKLY” appears on the Program screen. Pressing the button again makes each corresponding display disappear.

If you made a mistake, press CANCEL to access the PlusCode No. screen again and input the correct PlusCode number.

If an incorrect PlusCode number or the one for a broadcast already finished has been inputted, “ERROR” is displayed for about 5 seconds, then

6the PlusCode No. screen reappears.

Set tape speed

Press SP/EP () .

IMPORTANT

If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong VCR CH or CABLE CH number will be displayed on the Program screen in step 5. When this happens, set the correct guide channel number for that station. ( pg. 40, “Changing VCR Plus+® Setting”)

NOTES:

Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost if it lasts for more than 3 minutes. As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start at its start time unless its end time has elapsed.

To timer-record cable channels received through a cable box, be sure to keep the cable box turned on.

If “MEMORY FULL” appears on the display when you finish a program setting, the VCR’s memory for the Video Navigation function is full ( pg. 46). This is not related to actual recording, so you can finish recording normally, but the Video Navigation information such as recording date, start time, end time, and channel number will not be stored in memory.

Page 39
Image 39
JVC HR-S9900U manual Input receiving channel number, Engage timer recording standby mode

HR-S9900U specifications

The JVC HR-S9900U is a high-end VCR that exemplifies advanced technology and design, catering to avid collectors and home theater enthusiasts alike. Introduced in the late 1990s, this model stands out for its impressive array of features, making it a sought-after device for those who appreciate high-quality video playback and recording.

One of the defining characteristics of the HR-S9900U is its S-VHS (Super VHS) capability, which significantly enhances the resolution and quality of recorded tapes. This technology allows for a sharper and more detailed image compared to standard VHS, making it ideal for preserving home videos and important recordings. The VCR also supports S-VHS ET, which enables the playback of S-VHS tapes in standard VHS players, ensuring compatibility across different formats.

The HR-S9900U features dual playback heads, which improve the tracking accuracy and overall picture quality. This dual-head design not only enhances the clarity of the video but also minimizes artifacts like noise and distortion commonly found in conventional VHS playback. Coupled with advanced digital noise reduction technology, the VCR produces cleaner and clearer images even on older tapes.

Another key highlight of the HR-S9900U is its extensive editing functionalities. It includes features such as high-speed search and frame advance, which allow users to edit and create their own compilations with precision. Additionally, the model is equipped with the "Jog Shuttle" control for precise frame-by-frame navigation, making it easier to find and cut specific moments when editing.

The build quality of the HR-S9900U deserves mention; it features a solid construction that provides durability and a professional feel. The user-friendly interface is complemented by a remote control, which adds convenience for managing playback and recording settings from a distance.

In terms of connectivity, the JVC HR-S9900U includes multiple input and output ports such as S-Video, Composite Video, and Audio outputs. This versatility allows users to connect to various display devices, ensuring compatibility with modern televisions and audio systems.

Overall, the JVC HR-S9900U is a remarkable example of video recording technology from its era. With its S-VHS capabilities, dual-head design, and thoughtful editing features, it remains a valuable option for enthusiasts who value video fidelity and functionality in their home recording systems. Whether preserving cherished memories or curating a video library, the HR-S9900U continues to deliver exceptional performance.