TransmissionV-Belt Adjustment

1.Keep pulleys clean and properly aligned using a straight edge. Correct belt tension is essential for the transmission to work properly and efficiently, and for the longevity of the belt.

2.Use a belt tension tester to check the belt tension.

3.Apply the load to theV-belt at the center of the span between the pulleys.The belt deflection should be approximately 1/4" with 3 1/2 lbs. to 4 lbs. load.

CAUTION

DO NOT overtighten the V-belt.This will cause excessive strain on the transmission bearings, resulting in transmission failure.

Scrapers, Cocoa Mats, and Sprinkler Bars

1.Keep roller scraper bars clean. Replace any broken or stretchedspring.Preventaccumulationoftarordebrisaround pivot area.

2.Remove and replace the cocoa mats when badly worn by looseningthescrewsholdingtheminplace.Removetheside panel first to replace the rear mats.

3.Fill the water tank through the large cap on the top rear.Use only clean water or the valve, hoses, and sprinkler bars may become clogged.

Battery

The battery contains acids that can cause injury to the eyes and skin. To avoid eye irritation, always wear safety glasses. Use well insulated gloves when picking up the battery. Use the following guidelines when handling the battery:

1.DO NOT drop the battery. There is the possibility of risk that the battery may explode.

2.DO NOT expose the battery to open flames, sparks, cigarettes etc. The battery contains combustible gases and liquids. If these gases and liquids come in contact with a flame or spark, an explosion could occur.

R2000H — MAINTENANCE

3.ALWAYS keep the battery charged. If the battery is not charged a buildup of combustible gas will occur.

4.ALWAYS keep battery charging and cables in good working condition. Repair or replace all worn cables.

5.ALWAYS recharge the battery in an vented air environment, to avoid risk of a dangerous concentration of combustible gases.

6.ALWAYS wear eye protection and rubber gloves, since the battery contains sulfuric acid which burns skin and eats through clothing.

7.ALWAYS recharge the battery in an vented air environment, to avoid risk of a dangerous concentration of combustible gases.

8.In case the battery liquid (dilute sulfuric acid) comes in contact with clothing or skin, rinse skin or clothing immediately with plenty of water.

9.In case the battery liquid (dilute sulfuric acid) comes in contact with your eyes, rinse eyes immediately with plenty of water, then contact the nearest doctor or hospital, and seek medical attention.

CAUTION:

If your clothing or skin comes in contact with the battery acid, immediately wash off with running water and get medical attention.

Check the battery regularly and make sure that each electrolyte level is to the bottom of the vent well (Figure 22). If necessary add only distilled water in a well-ventilated area.

Figure 22. Battery Fluid Levels

PAGE 28 —R2000H RIDE-ON STATIC ROLLER — OPERATION AND PARTS MANUAL — REV. #6 (11/29/10)

R2000H specifications

The Multiquip R2000H is a versatile and robust portable generator designed to meet the demands of construction sites, rental industries, and various outdoor events. Known for its reliability and performance, this generator stands out with several key features and technologies that cater to diverse power needs.

One of the main features of the R2000H is its powerful engine. The generator is equipped with a reliable Honda GX390 engine, providing a starting output of 2000 watts and a running output of 1800 watts. This ensures ample power to run essential tools and equipment, such as drills, saws, and lights, effectively and efficiently.

The R2000H showcases advanced inverter technology, which offers clean and stable power that is crucial for sensitive electronic equipment. This feature makes it ideal for job sites where precision and protection of equipment are paramount. Inverter technology also ensures fuel efficiency, allowing for longer run times on a single tank of gas, making it an economical choice for extended use.

Portability is another significant characteristic of the Multiquip R2000H. It is designed with a compact structure and lightweight construction, making it easy to transport from one location to another. The integrated wheels and folding handle allow for smooth mobility, thus enhancing its usability on various job sites or recreational activities.

Additionally, the R2000H is constructed with durability in mind. The robust frame protects the generator from the rigors of job site challenges, while also incorporating features like a quiet muffler to reduce operating noise. This is particularly beneficial for users who need to operate the generator in noise-sensitive environments.

User-friendly controls make the R2000H accessible for novice users, while also providing necessary functionalities for experienced operators. The intuitive panel features multiple outlets, enabling the simultaneous use of different tools, and an easy-to-read fuel gauge that allows users to monitor fuel levels with confidence.

Overall, the Multiquip R2000H combines power, efficiency, and convenience, making it an excellent choice for various applications. Whether powering professional tools on a construction site or providing backup power during outdoor events, this generator is designed to deliver reliable performance with outstanding features and technologies.