Multiquip R2000H Injury to yourself and others, Seriously injured if you do not follow directions

Page 9

R2000H — SAFETY MESSAGE ALERT SYMBOLS

FORYOUR SAFETY ANDTHE SAFETY OF OTHERS!

Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in

injury to yourself and others.

This Operation and Parts Manual has been developed to provide

complete instructions for the safe

NOTEand efficient operation of the Multiquip Model R2000H Static Roller. Refer to the engine manufacturer's instructions for data relative to its safe operation.

Before using this roller, ensure that the operating individual has read and understands all instructions in this manual.

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you about potential hazards that could injure you or others. The Safety Messages specifically address the level of exposure to the operator, and are preceded by one of three words: DANGER, WARNING, or CAUTION.

DANGER: You WILL be KILLED or

SERIOUSLY injured if you do not follow directions.

WARNING: You CAN be KILLED or

SERIOUSLY injured if you do not follow directions.

CAUTION: You CAN be injured if you do not follow directions.

Potential hazards associated with MQ R2000H vibration roller operation will be referenced with Hazard Symbols which appear throughout this manual, and will be referenced in conjunction with Safety Message Alert Symbols.

HAZARD SYMBOLS

Lethal Exhaust Gases

Engine exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. NEVER operate this equipment in a confined area or enclosed structure that does not provide ample free flow air.

Explosive Fuel

GASOLINE is extremely flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine near spilled fuel or combustible fluids. DO NOT fill the fuel tank while the engine is running or hot. DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system. Store fuel in approved containers, in well-ventilated areas and away from sparks and flames. NEVER use fuel as a cleaning agent.

Burn Hazards

Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operations. Never operate the engine with heat shields or heat guards removed.

Rotating Parts

NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury.

R2000H RIDE-ON STATIC ROLLER — OPERATION AND PARTS MANUAL — REV. #6 (11/29/10) — PAGE 9

Image 9
Contents Model R2000H Proposition 65WARNING Page Table of Contents Ordering parts has never been easier Parts Ordering ProceduresRH 3.25 in mm LH 1.75 in mm LH 9 in mmDrive to rear roll 25 x 7 x 7 in .5 x17.8 x17.8 cmR2000H Specifications Engine R2000H Roller Dimensions R2000H DimensionsSeriously injured if you do not follow directions Injury to yourself and othersInstructions Always wear approved respiratory protectionRules for Safe Operation Always wear seat belts Rules for Safe OperationEmergencies Never stand below roller when it is being liftedMachine Safety Decals Operation and Safety DecalsRecommended Slope Do not operate this roller on slippery or wet surfacesTipping Rollover Tipping RolloversPage Roller Components R2000H Roller ComponentsFree Wheel Engagement Pin Tie-Down Transport PointsAttach a chain or suitable tie-down R2000H Engine Components Before Starting R2000H InspectionEngine Oil Check Capacity is 400 cc Reference manufacturer engineWater System Check Sit down in the operators seat Place the Choke Lever in the Closed positionStarting the Engine R2000H Operation Ignition SwitchWater Sprinklers Control Place the transmission lever in the neutral positionEmergency Shut-Down R2000H Maintenance LubricationHydrostatic Transmission Steering Adjustment Transmission Control Lever AdjustmentDrive Chains Tension Adjustment Drive ChainsTransmissionV-Belt Adjustment Use a belt tension tester to check the belt tensionScrapers, Cocoa Mats, and Sprinkler Bars Roller Storage R2000H Preparation for Long -TERM StorageR2000H Troubleshooting Roller Engine Troubleshooting R2000H Troubleshooting EngineXxxxx only Not Used on Explanation of Code in Remarks ColumnR2000H Suggested Spare Parts Name Plate and Decals R2000H Name Plate and DecalsDECAL, MQ R2000H Right DECAL, MQ R2000H LeftDECAL, MQ DECAL, MQ MultiquipBrake Assy R2000H Brake AssyLEVER, Parking Brake Adjustable YokeCAP Screw 5/16 SpacerSteering Assy R2000H Steering AssyHexnut 5/8 CAPFlatwasher 5/8 Washer 5/8Chassis & Covers Assy R2000H Chassis and Covers AssyGUARD, Rear Main Body FramePANEL, Left Side PLATE, ShifterBattery Assy R2000H Battery AssyCLAMP, Battery BatteryCAP Screw 3/8 REDRear Drum Assy R2000H Rear Drum AssyBearing Sprocket 70 ToothSCREW, HEX 5/8 Drive System Assy R2000H Drive System AssyWASHER, Flat 3/8 Honda GX240K1QAE2Clip PULLEY, Engine 6 MMTransmission Assy R2000H Transmission AssyROD, Adjustment Adjustment RODPUMP, Hydrostatic LEVER, Free Flow ReliefWater System Assy R2000H Water System AssyWasher 5/16 Flat W TANK, WaterWasher 5/16 Lock CAP, Plastic Water TankAIR Cleaner Assy Honda GX240K1QAE2 Engine AIR Cleaner AssyGROMMET, AIR Cleaner COVER, AIR CleanerCOLLAR, AIR Cleaner Collar B, AIR CleanerCamshaft Assy Honda GX240K1QAE2 Engine Camshaft AssyROD Push SPRING, Weight ReturnARM Valve Rocker Lifter ValveCarburetor Assy Honda GX240K1QAE2 Engine Carburetor AssyGasket SET PLATE, Lever SettingValve SET, Float Float SETControl Assy Honda GX240K1QAE2 Engine Control AssyROD, Governor ARM, GovernorSPRING, Governor SPRING, Throttle ReturnCrankcase Cover Assy Honda GX240K1QAE2 Engine Crankcase Cover AssyHOLDER, Governor Weight WEIGHT, GovernorPIN, Governor Weight GASKET, Case CoverCrankshaft Assy Honda GX240K1QAE2 Engine Crankshaft Assy90745ZE2600 KEY 6.3 X 6.3 X 961006206000 WEIGHT, BalancerCylinder Barrel Assy Honda GX240K1QAE2 Engine Cylinder Barrel AssySHAFT, Governor ARM Switch ASSY., OIL LevelBOLT, Drain Plug OIL SealCylinder Head Assy Honda GX240K1QAE2 Engine Cylinder Head AssyGUIDE, EX. VALVE, OS, Optional GUIDE, VALVE, OS, OptionalCLIP, Valve Guide GASKET, Cylinder HeadFAN Cover Assy Honda GX240K1QAE2 Engine FAN Cover AssyCLIP, Tube CLIP, Wire HarnessShroud GROMMET, Drain HoleFlywheel Assy Honda GX240K1QAE2 Engine Flywheel AssyFlywheel Comp FAN, CoolingNUT, Special 16MM KEY, Special WoodruffFuel Tank Assy Honda GX240K1QAE2 Engine Fueltank AssyJOINT, Fuel Tank Rubber Supporter 107MMGASKET, Fuel Filler CAP FILTER, FuelIgnition Coil Assy Honda GX240K1QAE2 Engine Ignition Coil AssyGROMMET, Wire CLAMP, WireWIRE, Stop Switch 370MM HOLDER, Stop Switch WireStarter Motor Assy Honda GX390K1QAE2 Starter Motor AssyContactor Assy WIRE, Water CoverArmature Clutch OverrunningHonda GX240K1QAE2 Control BOX Assy CLIP, Purse Lock Control BOX AssyTUBE, Fastener FUSE, Blade 15A Alert UNIT, OILMuffler Assy Honda GX240K1QAE2 Engine Muffler AssyProtector COMP., Muffler MufflerPROTECTOR, EX. Pipe PIPE, EXPiston Assy Honda GX240K1QAE2 Engine Piston AssyRing SET, PISTON, STD BOLT, Connecting RODRing SET, PISTON, 0.75, Optional PISTON, StandardRecoil Starter Assy Honda GX240K1QAE2 Engine Recoil Starter AssyRATCHET, Starter PULLEY, Recoil StarterSPRING, Friction SPRING, Starter ReturnEngine Labels Honda GX240K1QAE2 Engine Engine LabelsLABEL, Caution EMBLEM, InternalMARK, CHOKE, External MARK, OIL ALERT, ETerms and Conditions of Sale Parts Page HERE’S HOW to GET Help
Related manuals
Manual 90 pages 21.37 Kb

R2000H specifications

The Multiquip R2000H is a versatile and robust portable generator designed to meet the demands of construction sites, rental industries, and various outdoor events. Known for its reliability and performance, this generator stands out with several key features and technologies that cater to diverse power needs.

One of the main features of the R2000H is its powerful engine. The generator is equipped with a reliable Honda GX390 engine, providing a starting output of 2000 watts and a running output of 1800 watts. This ensures ample power to run essential tools and equipment, such as drills, saws, and lights, effectively and efficiently.

The R2000H showcases advanced inverter technology, which offers clean and stable power that is crucial for sensitive electronic equipment. This feature makes it ideal for job sites where precision and protection of equipment are paramount. Inverter technology also ensures fuel efficiency, allowing for longer run times on a single tank of gas, making it an economical choice for extended use.

Portability is another significant characteristic of the Multiquip R2000H. It is designed with a compact structure and lightweight construction, making it easy to transport from one location to another. The integrated wheels and folding handle allow for smooth mobility, thus enhancing its usability on various job sites or recreational activities.

Additionally, the R2000H is constructed with durability in mind. The robust frame protects the generator from the rigors of job site challenges, while also incorporating features like a quiet muffler to reduce operating noise. This is particularly beneficial for users who need to operate the generator in noise-sensitive environments.

User-friendly controls make the R2000H accessible for novice users, while also providing necessary functionalities for experienced operators. The intuitive panel features multiple outlets, enabling the simultaneous use of different tools, and an easy-to-read fuel gauge that allows users to monitor fuel levels with confidence.

Overall, the Multiquip R2000H combines power, efficiency, and convenience, making it an excellent choice for various applications. Whether powering professional tools on a construction site or providing backup power during outdoor events, this generator is designed to deliver reliable performance with outstanding features and technologies.