Multiquip GDP-5H manual Burn Hazards, Respiratory Hazards

Page 6

GDP-5H — SAFETY MESSAGE ALERT SYMBOLS

FORYOUR SAFETY AND THE SAFETY OF OTHERS!

HAZARD SYMBOLS

Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.

This Owner's Manual has been developed to provide complete instructions for the safe and efficient

NOTE operation of the MQ Model GDP-5HPortable Generator. Refer to the

engine manufacturers instructions for data relative to its safe operation.

Before using this generator, ensure that the operating individual has read and understands all instructions in this manual.

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you about potential hazards that could injure you or others. The Safety Messages specifically address the level of exposure to the operator, and are preceded by one of three words: DANGER,

DANGER

You WILL be KILLED or SERIOUSLY INJURED

if you DO NOT follow these directions.

WARNING

You CAN be KILLED or SERIOUSLY INJURED if

you DO NOT follow these directions.

CAUTION

You CAN be INJURED if you DO NOT follow these directions.

Potential hazards associated with the operation of a GDP- 5H Portable Generator will be referenced with Hazard Symbols which appear throughout this manual, and will be referenced in conjunction with Safety Message Alert Symbols.

WARNING Lethal Exhaust Gas Hazards

Engine exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. NEVER operate this equipment in a confined area or enclosed structure that does not provide ample free flow air.

WARNING Explosive Fuel Hazards

Gasoline is extremely flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine near spilled fuel or combustible fluids.

DO NOT fill the fuel tank while the engine is running or hot. DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system. Store fuel in approved containers, in well-ventilated areas and away from sparks and flames.

 

WARNING

Burn Hazards

Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operations. Never operate the engine with heat shields or heat guards removed.

 

WARNING

Respiratory Hazards

ALWAYS wear approved respiratory protection when required.

PAGE 6 — GDP-5H A.C. GENERATOR— PARTS & OPERATION MANUAL — REV. #2 (10/05/05)

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model GDP-5H Page Heres HOW to GET Help Table of Contents Parts Ordering Procedures When ordering parts Please supply the following informationBurn Hazards Respiratory HazardsEquipment Damage Rotating Parts HazardsGDP-5H Rules for Safe Operation Read this manualGDP-5H Rules for Safe Operation Death EmergenciesMachine Safety Decals Operation and Safety DecalsGDP-5H Specifications Generator Effects of Altitude and HeatSpecifications Engine GDP-5H Dimensions DimensionsControl Box Phase Vibrator ApplicationGenerator Excitation SystemSingle Phase Load 60 Hz GDP-5H Load ApplicationExtension Cables Ground the Generator Three Phase Load 180 HzHow to Use Ground the ToolGDP-5H Controls and Indicators GDP-5H Controls and Indicators 240V Full Power SwitchFuelTank Fuel tank capacity is 5 gallons 19 liters GDP-5H Generator Refueling Generator RefuelingIndoor Installation GDP-5H InstallationOutdoor Installation MountingGDP-5H Installation Connecting the GroundGeneral Inspection Prior to Operation Ground Power Tools GDP-5H PRE-INSPECTIONExtension Cable Engine Oil Check GDP-5H PRE-INSPECTION EngineBefore Starting Fuel Check180 Hz Circuit Breakers OFF Position Starting the Engine Choke LeverGDP-5H Initial START-UP/GENERATOR Operation Connecting the Load Hz Output ReceptaclesStopping the Engine Generator StorageGDP-5H Maintenance Engine Engine Maintenance ScheduleSpark Plug Gap Engine Oil DrainingGDP-5H Wiring Diagram Generator S/N 5541049 and below GDP-5H -WIRING Diagram Generator S/N 5543731 and Above GDP-5H -TROUBLESHOOTING Engine GDP-5H -TROUBLESHOOTING Engine GDP-5H -TROUBLESHOOTING Generator Page Items Found In the Remarks Column How to read the marks and remarks used in this partsGDP-5H Explanation of Code in Remarks Column Items Found In the Items Number ColumnTo 3 Units DescriptionGDP-5H Nameplate and Decals GDP-5H Nameplate and Decals Part Name QTY RemarksGDP-5H Generator Assy SET Bolt Rotor GDP-5H Control BOX Assy Control BOX GDP-5H Muffler Assy GDP-5H Muffler Assy GDP-5H Pipe Frame Assy Pipe Frame Honda GX340K1EDN2 Engine AIR Cleaner Assy Part Name Honda GX340K1EDN2 Engine Camshaft Assy ROD, Push Honda GX340K1EDN2 Engine Carburetor Assy Gasket SET Honda GX340K1EDN2 Engine Control Assy ARM, Governor Honda GX340K1EDN2 Engine Crankcase Cover Assy GASKET, Case Cover Honda GX340K1EDN2 Engine Crankshaft Assy Part Name QTY. Remarks Honda GX340K1EDN2 Engine Cylinder Barrel Assy Switch ASSY., OIL Level Honda GX340K1EDN2 Engine Cylinder Head Assy Cylinder Head Honda GX340K1EDN2 Engine FAN Cover Assy COVER, FAN *NH1* Black Honda GX340K1EDN2 Engine Flywheel Assy FAN, Cooling Honda GX340K1EDN2 Engine Ignition Coil Assy Coil ASSY., Ignition Honda GX340K1EDN2 Engine Piston Assy Piston STD Honda GX340K1EDN2 Engine Recoil Starter Assy PULLEY, Recoil Starter Honda GX340K1EDN2 Engine Solenoid Assy SPRING, Choke Return Honda GX340K1EDN2 Engine Labels Assy Emblem Effective October 1, 2002 Terms and Conditions of Sale Parts Page Your Local Dealer is

GDP-5H specifications

The Multiquip GDP-5H is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and heavy-duty operations. As part of Multiquip's lineup, the GDP-5H stands out owing to its exceptional performance, durability, and user-friendly design.

One of its main features is the powerful Honda GX160 engine, which provides reliable performance and ensures efficient operation. The engine is known for its longevity and low maintenance requirements, allowing operators to focus on their tasks without frequent interruptions. Additionally, the GDP-5H has a compact design, making it easy to transport and maneuver in tight job sites.

The GDP-5H comes equipped with a hydraulic pump that delivers high flow rates, allowing for fast and efficient operation. This is particularly advantageous when working with multiple attachments or in demanding environments where time is of the essence. The hydraulic system is engineered for maximum reliability and ease of maintenance, featuring components that are readily accessible.

In terms of versatility, the GDP-5H can be fitted with various attachments, making it suitable for a range of applications, from trenching to lifting and beyond. This adaptability not only enhances productivity but also allows companies to optimize their investment in equipment.

Safety is a priority in the design of the Multiquip GDP-5H. It features operator-friendly controls that are intuitive and easy to understand, minimizing the risk of accidents and enhancing overall operational safety. Additionally, the equipment is designed with protective measures to safeguard both the operator and the machine from potential hazards.

The GDP-5H also emphasizes convenience through its fuel efficiency and reduced emissions, meeting stringent industry standards. This is increasingly important in today's world, where environmental considerations play a critical role in equipment selection.

In summary, the Multiquip GDP-5H is a powerful, adaptable, and user-friendly machine that addresses the needs of various industrial applications. Its combination of a reliable Honda engine, efficient hydraulic system, safety features, and versatility positions it as a valuable asset for any construction or heavy-duty operation. Whether used for site preparation, material handling, or other tasks, the GDP-5H proves to be an essential tool for productivity and efficiency on the job.
Top Page Image Contents