HONDA GX610K1VD/U1VD ENGINE — CAMSHAFT ASSY.
NO. | PART NO. | PART NAME | QTY. | REMARKS |
1 | 12209ZE8003 | SEAL, VALVE STEM | 2 |
|
2 | 14100ZJ1842 | CAMSHAFT ASSY. | 1 |
|
3 | 14410ZJ1840 | ROD, PUSH | 4 |
|
4 | 14431ZE2010 | ARM, VALVE ROCKER | 4 |
|
5 | 14451ZE1013 | PIVOT, ROCKER ARM | 4 |
|
6$ | 14568ZJ1841 | SPRING, WEIGHT RETURN | 1 |
|
7 | 14576ZJ1840 | PIN, DECOMPRESSION | 1 |
|
8 | 14711ZE3000 | VALVE, IN. | 1 |
|
9 | 14721ZE3000 | VALVE, EX. | 1 |
|
10 | 14730ZJ1841 | LIFTER ASSY., VALVE | 1 |
|
11 | 14751ZE2003 | SPRING, VALVE | 2 |
|
12 | 14760ZJ1840 | SHAFT COMP., VALVE LIFTER | 1 |
|
13 | 14764ZJ1840 | SPRING, VALVE LIFTER | 2 |
|
14 | 14771ZE2000 | RETAINER, IN. VALVE SPRING | 2 |
|
15 | 14773ZE2000 | RETAINER, EX. VALVE SPRING | 2 |
|
16 | 14775ZE2010 | SEAT, VALVE SPRING | 2 |
|
17 | 14781ZE2000 | ROTATOR, VALVE | 2 |
|
18 | 14791ZE2010 | PLATE, PUSH ROD GUIDE | 2 |
|
19 | 90005896000 | BOLT, FLANGE, 5X16 | 1 |
|
20 | 90012ZE0010 | BOLT, PIVOT (8MM) | 4 |
|
21 | 90206ZE1000 | NUT, PIVOT ADJ. | 4 |
|
22 | 90446357000 | WASHER, THRUST, 17.2MM | 1 |
|
23 | 90602ZE1000 | CLIP, GOVERNOR HOLDER | 2 |
|
24 | 90702GB6910 | DOWEL PIN, 8X12 | 1 |
|
25 | 9410106800 | WASHER, FLAT, 6MM | 4 |
|
26 | 9430560282 | PIN, SPRING, 6X28 | 1 |
|
27 | 957010602500 | BOLT, FLANGE, 6X25 | 1 |
|
GAC9.7HZ 60 hz GENERATOR • operation and parts manual — rev. #2 (03/31/10) — page 47