Minelab Mine lab Explorer IITM, P0591-A Introducing Pinpoint, Explorer II’s Pinpoint function

Page 59

 

THE MINELAB EXPLORER II

 

PINPOINTING THE OBJECT

 

 

 

Introducing Pinpoint

 

 

Figure 5.20. See also Pinpoint overview in Chapter 4: Control Panel, page

 

 

34.

 

 

During normal operation the Explorer II operates with discrimination

 

 

settings like Iron Mask or targets chosen from the Select target list.

 

 

When the approximate location of a target has been determined, it is

 

 

necessary to identify the object’s exact position. This is done using

 

Figure 5.20 Pinpoint shortcut button

the Explorer II’s Pinpoint function.

 

 

Enabling Pinpoint instructs the Explorer II to temporarily disengage

 

 

discrimination and become an ‘all metal’ detector. This means that

 

 

objects normally discriminated against will emit a target signal when

 

 

beneath the coil.

 

 

For example, Iron Mask is activated and the Explorer II has

 

 

detected the approximate location of a non-ferrous coin but ignored

 

 

the rusty nail buried nearby. Selection of Pinpoint instructs the

 

 

Explorer II to respond to all metals positioned directly beneath the

5

 

coil. Now, instead of a single signal for the coin the detector will also

 

QUICKSTART

 

respond to the nail.

 

 

 

It should be noted that the Pinpoint function is designed to zone in on

 

 

a target with subsequent passes. For this reason it is recommended

 

 

that you maintain the same sweep height above the target and not to

 

 

pass repeatedly back and forth across the target at various heights.

 

 

This incorrect method can cause the detector to desensitize and

 

 

reduces the depth of Pinpoint. If this happens, remove the coil from

 

 

the area of the target for a few seconds so its sensitivity can recover.

 

 

For this reason, Minelab recommends Pinpoint is only used

 

 

once the approximate location of a target has been

 

 

determined. The display screen’s Pinpoint indicator will flash to

 

 

remind you to turn Pinpoint off before resuming normal detecting.

 

 

Instructions for the use of Pinpoint appear on the following page.

 

 

 

59

 

PINPOINTING THE OBJECT

 

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Minelab Explorer Minelab Explorer Contents Table of Contents contents Minelab Explorer User Info Soon as you have assembled the detector IntroductionAbout this Manual Hunting Minelab Electronics wish you every success in your treasureMINELAB’S Unique Technology Two mode detectingQuickstart mode Advanced modePersonalize your Explorer for specialized targeting Getting Lost?Advanced Use provides all of the information you need to Full Band Spectrum FBS DiscriminationGround Compensation You are now ready to proceed to AssemblyMinelab Explorer Assembly Unpacking Your Explorer Easy referenceYou can also visit us on the web AccessoriesList of Parts Assembling the Detector Handle assembly Shaft assembly Search coilPre-assembled and any attempt to disconnect will void your Connecting the search coil to the lower shaftWhere it enters the search coil itself. They are shipped Detector warrantySecuring yoke to search coil You are now ready to proceed to the shaft assemblyLower shaft Shaft assemblyTo assemble the lower and upper shaft Shaft Connecting the Shaft AssemblyConnecting the shaft assembly to the handle assembly Coil not connected? You are now ready to proceed to the handle assemblyTo adjust armrest Handle AssemblyAdjusting the armrest assembly Fitting the armrest strap Attaching headphones HeadphonesRubber Washer Replacing and Fitting the Search Coil Control Panel Control Panel Easy referenceBatteries Replacing alkaline batteries Battery PackRemoval of battery pack It as explained below before operating the detector. Recharging NiMH battery pack with the mainsNiMH battery pack supplied with your detector ChargerRecharging Recharging NiMH battery pack with the car chargerTo ‘accessories’ for power to be supplied to the charger You are now ready to proceed to Control Panel Battery life indicationsHours Control Panel Quickstart Introducing Quickstart Getting StartedDisplay memory Trying out the detector Beginner USE10 2 Quickstart DisplayAreas of the screen are Smartfind’s preset QUICKSTART’S Smartfind Display Two-dimensional discriminationTwo-dimensional discrimination explained Items will cause the target crosshair to appear at the top Ferrous contentInterpreting target responses ConductivitySmartfind Discrimination pattern Introducing DiscrimIron Mask Adjusting the Iron MaskSmartfind in Iron Mask Operating in Iron MaskFerrous and conductivity rating Target crosshair displayed in Smartfind mode that is, itsQUICKSTART’S Digital Display Digital displayFull screen display Adjusting the display contrastModifying the Display Semi-auto Noise CancelAdjusting sensitivity Sensitivity controlThreshold control Adjusting ThresholdDisplay Icon Pitch of response Adjusting the volumeAudio Response Main Menu Audio HeadphonesAudio Menu Introduction to the Audio menuMax limit Audio Adjusting the VolumeIntroducing Volume Gain Main Menu Audio Volume Gain adjustmentLimits Introducing ToneThreshold tone VariabilityConductivity Audio Adjusting the SoundsIntroducing Sounds ConstantMain Menu Audio Sounds Ferrous FerrousTesting Target Audio Responses tutorial Respond to the nail Introducing PinpointExplorer II’s Pinpoint function Rusty nail buried nearby. Selection of Pinpoint instructs21 Pinpointing the object Using PinpointFill your holes Select targets list Selecting TargetsSmartfind thumbnail. Discrimination pattern for current Top left corner of all discrimination patterns Explorer’s II Discrim factory settingMask shortcut button You are now ready to proceed to Advanced Use Moving to Advanced modeReset the detector Main Menu Options AdvancedMinelab Explorer Advanced Use Audio menu. See Advanced MODE’S Main MenuAdvanced target preferences Starting in Advanced ModeAre you ready? Beginning Advanced useAdvanced MODE’S Displays Advanced MODE’S Learn Display Explorer II’s Discrimination functions Learning TargetsSilence please Introducing LearnLEARN’S Target Selection Phase 1 Preparation for LearnThis tutorial shows you how to learn a target, make Adjustments and save your selectionFor more detail on Save DISCRIM, turn to Phase 2 Learning and Saving the target patternAdvanced MODE’S Edit Display Edit to customize your discrimination pattern Editing PatternsIntroducing Edit Main Menu Display EditEditing and Saving Target Patterns Phase 1 Preparing for editingPhase 2 Resizing and moving the target frame Select menu as Advanced mode’s current setting Phase 3 Rejecting the framed target areaPhase 4 Saving edited discrimination pattern Main Menu Select Advanced MODE’S Select MenuAdvanced mode’s Select menu Main Menu Save Save Discrim S1-S6 Saving TargetsSaving Shortcut Saving targetsAudio menu Volume ShortcutMain Menu Options Options MenuOptions menu Main Menu Options Noise Options NoiseNoise Shortcut NoiseNormal Options ResponseIntroducing Response Main Menu Options ResponseAudio Fast Options RecoveryIntroducing Recovery Main Menu Options RecoveryMain Menu Options Settings Settings MenuIntroducing the Settings menu Saving and loading a settingAs mentioned earlier in this Get into the habitUser Info Helpful Hints user tips Batteries Noise CancelMinelab Explorer Battery Performance Comparisons User Preferences Setting Range Factory Preset User a User BUser Preferences Control Panel Button Functions Quickstart Menu Structure Advanced Menu Structure Detector starts, but it Switches off by itselfDetector does not Start at allPhone Service Repair FormDescription of Fault Purchased From100 Repairs WarrantyTechnical Specifications for the Minelab Explorer User Functions Software Explorer II ModelGlossary of Terms 105 106 107 Detector Care and Safety take care

Mine lab Explorer IITM, P0591-A specifications

The Minelab P0591-A, commonly known as the Explorer II, is an advanced metal detector that appeals to hobbyists and professionals alike. Renowned for its cutting-edge technology and robust features, the Explorer II sets a high standard for metal detecting equipment.

One of the standout features of the Explorer II is its Multi-Frequency Technology. This groundbreaking system allows the detector to operate on multiple frequencies simultaneously, enhancing its ability to detect a wide range of metal objects. This versatility means users can efficiently find everything from small coins to larger artifacts, all while minimizing the risk of missing valuable targets.

The Explorer II is also equipped with Smartfind discrimination technology. This feature provides users with a visual representation of the detected signals, allowing them to distinguish between different types of metals. The LCD screen displays a target ID, enabling the detectorist to make informed decisions about whether to dig or not based on the target’s identity. This capability not only saves time but also enhances the overall efficiency of treasure hunting.

Another significant characteristic of the Explorer II is its customizable settings. The detector comes with various pre-set detecting modes for different environments, such as trashy urban areas or open fields rich in history. Users can also manipulate sensitivity settings and discrimination levels, tailoring the device to their specific needs and preferences. This level of customization makes the Explorer II a versatile tool suitable for various terrains and conditions.

The build quality of the Explorer II is also commendable. Designed for durability, it can withstand the rigors of outdoor use while remaining lightweight and user-friendly. The adjustable shaft allows for comfortable use for users of all heights, and the ergonomic design ensures that long treasure hunting sessions are less fatiguing.

Battery life is another area where the Explorer II excels. The device operates on a rechargeable battery, providing extended use without the need for frequent changes. This capacity for prolonged operation makes it ideal for long days out in the field.

In summary, the Minelab P0591-A Explorer II is a sophisticated metal detector that combines innovative technology with user-friendly features. Its Multi-Frequency Technology, Smartfind discrimination, customization options, and durable build make it a top choice for those serious about metal detecting. Whether searching for coins in local parks or exploring historical sites, the Explorer II provides users with the tools necessary for a successful treasure hunting experience.
Top Page Image Contents