THE MINELAB EXPLORER II
EDITING AND SAVING TARGET PATTERNS!
tutorial
Figure 6.8 Discrimination pattern for jewelry (excluding foil)
Figure 6.8 Select option
Figure 6.9 Edit screen
Figure 6.9 Edit screen with small target frame
This tutorial builds upon what has been covered in earlier target tutorials. The tutorial’s four phases outline the steps necessary to edit and save a preselected discrimination pattern.
PHASE 1: Preparing for editing
STEP 1 Choose SELECT from the Main Menu and press the top right shift button to CLEAR the Smartfind thumbnail display.
STEP 2 (Figure 6.8) Move down the target list and accept JEWELRY and reject FOIL to establish an initial discrimination pattern.
STEP 3 Press the Main Menu shortcut button and select DISPLAY.
STEP 4 (Figure 6.9) Select EDIT to show the
PHASE 2: Resizing and moving the target frame
STEP 5 (Figure 6.10) To change the size of the target frame, press the top left shift button to switch between Edit’s three target frame sizes. (For the purposes of this tutorial, please choose the
Figure 6.10 Edit screen with target crosshair STEP 6 To move the target frame, press the shift buttons next to
and medium target framethe display’s navigation arrows. Position the resized frame over the screen section you wish to edit (in the location approximated in Figure 6.10).
Continued next page...
EDITING AND SAVING TARGET PATTERNS
6
ADVANCED USE
77