Minelab Mine lab Explorer IITM, P0591-A LEARN’S Target Selection, Phase 1 Preparation for Learn

Page 73

 

THE MINELAB EXPLORER II

 

 

 

LEARN’S TARGET SELECTION

tutorial!

 

 

 

This tutorial shows you how to learn a target, make

adjustments and save your selection.

Phase 1: Preparation for Learn

STEP 1

(Figure 6.2) Go to the Advanced Learn display. It does not

 

matter whether you were in Iron Mask or Discrim (shown

 

in the adjacent figure).

STEP 2

(Figure 6.3) Press the shift button next to Reject All/

Figure 6.2 Advanced Mode’s Learn display

Accept All icon to fill in the screen. The icon changes to all

 

clear to indicate that the next time it is pressed, the Learn

 

screen will clear. Press the button again to clear the

 

screen and accept all targets.

STEP 3

While the screen is completely cleared, rest the coil and

 

check for interference (erratic noises and random

 

movements of the target crosshair). If you experience

Figure 6.3 Accept all clears the screen

interference press Noise Cancel, reduce the Sensitivity, or

move the detector to a different place.

 

STEP 4

Check the area of ground where you would like to learn

 

the target to make sure that there are no other targets in

 

the ground.

STEP 5

Press the Reject All/Accept All shift button to completely

 

fill the screen and reject all targets.

STEP 6

(Figure 6.4) Press the lower left hand shift button twice to

Figure 6.4 Reject all fills the screen

change the cursor to medium size. The size of the cursor

 

sets how ‘loosely’ the target is matched for each

 

successive pass of the coil. Place the target on the ground

 

and press the upper left shift button next to the Accept

 

icon. The tick will begin to flash.

Now the detector is prepared to Learn targets.

LEARN’S TARGET SELECTION

6

ADVANCED USE

73

Image 73
Contents Minelab Explorer Minelab Explorer Contents Table of Contents contents Minelab Explorer User Info Soon as you have assembled the detector IntroductionAbout this Manual Hunting Minelab Electronics wish you every success in your treasureQuickstart mode Two mode detectingAdvanced mode MINELAB’S Unique TechnologyAdvanced Use provides all of the information you need to Getting Lost?Personalize your Explorer for specialized targeting Full Band Spectrum FBS DiscriminationGround Compensation You are now ready to proceed to AssemblyMinelab Explorer Assembly Unpacking Your Explorer Easy referenceList of Parts AccessoriesYou can also visit us on the web Assembling the Detector Handle assembly Shaft assembly Search coilWhere it enters the search coil itself. They are shipped Connecting the search coil to the lower shaftDetector warranty Pre-assembled and any attempt to disconnect will void yourSecuring yoke to search coil You are now ready to proceed to the shaft assemblyTo assemble the lower and upper shaft Shaft assemblyLower shaft Connecting the shaft assembly to the handle assembly Connecting the Shaft AssemblyShaft Coil not connected? You are now ready to proceed to the handle assemblyAdjusting the armrest assembly Handle AssemblyTo adjust armrest Fitting the armrest strap Attaching headphones HeadphonesRubber Washer Replacing and Fitting the Search Coil Control Panel Control Panel Easy referenceBatteries Removal of battery pack Battery PackReplacing alkaline batteries NiMH battery pack supplied with your detector Recharging NiMH battery pack with the mainsCharger It as explained below before operating the detector.To ‘accessories’ for power to be supplied to the charger Recharging NiMH battery pack with the car chargerRecharging Hours Battery life indicationsYou are now ready to proceed to Control Panel Control Panel Quickstart Display memory Getting StartedIntroducing Quickstart Trying out the detector Beginner USE10 2 Quickstart DisplayAreas of the screen are Smartfind’s preset Two-dimensional discrimination explained Two-dimensional discriminationQUICKSTART’S Smartfind Display Interpreting target responses Ferrous contentConductivity Items will cause the target crosshair to appear at the topSmartfind Discrimination pattern Introducing DiscrimIron Mask Adjusting the Iron MaskSmartfind in Iron Mask Operating in Iron MaskQUICKSTART’S Digital Display Target crosshair displayed in Smartfind mode that is, itsDigital display Ferrous and conductivity ratingModifying the Display Adjusting the display contrastFull screen display Adjusting sensitivity Noise CancelSensitivity control Semi-autoDisplay Icon Adjusting ThresholdThreshold control Audio Response Adjusting the volumePitch of response Audio Menu HeadphonesIntroduction to the Audio menu Main Menu AudioIntroducing Volume Audio Adjusting the VolumeMax limit Gain Main Menu Audio Volume Gain adjustmentThreshold tone Introducing ToneVariability LimitsIntroducing Sounds Audio Adjusting the SoundsConstant ConductivityMain Menu Audio Sounds Ferrous FerrousTesting Target Audio Responses tutorial Explorer II’s Pinpoint function Introducing PinpointRusty nail buried nearby. Selection of Pinpoint instructs Respond to the nail21 Pinpointing the object Using PinpointFill your holes Select targets list Selecting TargetsSmartfind thumbnail. Discrimination pattern for current Mask shortcut button Explorer’s II Discrim factory settingTop left corner of all discrimination patterns Reset the detector Moving to Advanced modeMain Menu Options Advanced You are now ready to proceed to Advanced UseMinelab Explorer Advanced Use Audio menu. See Advanced MODE’S Main MenuAre you ready? Starting in Advanced ModeBeginning Advanced use Advanced target preferencesAdvanced MODE’S Displays Advanced MODE’S Learn Display Silence please Learning TargetsIntroducing Learn Explorer II’s Discrimination functionsThis tutorial shows you how to learn a target, make Phase 1 Preparation for LearnAdjustments and save your selection LEARN’S Target SelectionFor more detail on Save DISCRIM, turn to Phase 2 Learning and Saving the target patternAdvanced MODE’S Edit Display Introducing Edit Editing PatternsMain Menu Display Edit Edit to customize your discrimination patternPhase 2 Resizing and moving the target frame Phase 1 Preparing for editingEditing and Saving Target Patterns Phase 4 Saving edited discrimination pattern Phase 3 Rejecting the framed target areaSelect menu as Advanced mode’s current setting Advanced mode’s Select menu Advanced MODE’S Select MenuMain Menu Select Saving Shortcut Saving TargetsSaving targets Main Menu Save Save Discrim S1-S6Audio menu Volume ShortcutOptions menu Options MenuMain Menu Options Noise Shortcut Options NoiseNoise Main Menu Options NoiseIntroducing Response Options ResponseMain Menu Options Response NormalAudio Introducing Recovery Options RecoveryMain Menu Options Recovery FastIntroducing the Settings menu Settings MenuSaving and loading a setting Main Menu Options SettingsAs mentioned earlier in this Get into the habitUser Info Helpful Hints user tips Batteries Noise CancelMinelab Explorer Battery Performance Comparisons User Preferences Setting Range Factory Preset User a User BUser Preferences Control Panel Button Functions Quickstart Menu Structure Advanced Menu Structure Detector does not Switches off by itselfStart at all Detector starts, but itDescription of Fault Service Repair FormPurchased From Phone100 Repairs WarrantyTechnical Specifications for the Minelab Explorer User Functions Software Explorer II ModelGlossary of Terms 105 106 107 Detector Care and Safety take care

Mine lab Explorer IITM, P0591-A specifications

The Minelab P0591-A, commonly known as the Explorer II, is an advanced metal detector that appeals to hobbyists and professionals alike. Renowned for its cutting-edge technology and robust features, the Explorer II sets a high standard for metal detecting equipment.

One of the standout features of the Explorer II is its Multi-Frequency Technology. This groundbreaking system allows the detector to operate on multiple frequencies simultaneously, enhancing its ability to detect a wide range of metal objects. This versatility means users can efficiently find everything from small coins to larger artifacts, all while minimizing the risk of missing valuable targets.

The Explorer II is also equipped with Smartfind discrimination technology. This feature provides users with a visual representation of the detected signals, allowing them to distinguish between different types of metals. The LCD screen displays a target ID, enabling the detectorist to make informed decisions about whether to dig or not based on the target’s identity. This capability not only saves time but also enhances the overall efficiency of treasure hunting.

Another significant characteristic of the Explorer II is its customizable settings. The detector comes with various pre-set detecting modes for different environments, such as trashy urban areas or open fields rich in history. Users can also manipulate sensitivity settings and discrimination levels, tailoring the device to their specific needs and preferences. This level of customization makes the Explorer II a versatile tool suitable for various terrains and conditions.

The build quality of the Explorer II is also commendable. Designed for durability, it can withstand the rigors of outdoor use while remaining lightweight and user-friendly. The adjustable shaft allows for comfortable use for users of all heights, and the ergonomic design ensures that long treasure hunting sessions are less fatiguing.

Battery life is another area where the Explorer II excels. The device operates on a rechargeable battery, providing extended use without the need for frequent changes. This capacity for prolonged operation makes it ideal for long days out in the field.

In summary, the Minelab P0591-A Explorer II is a sophisticated metal detector that combines innovative technology with user-friendly features. Its Multi-Frequency Technology, Smartfind discrimination, customization options, and durable build make it a top choice for those serious about metal detecting. Whether searching for coins in local parks or exploring historical sites, the Explorer II provides users with the tools necessary for a successful treasure hunting experience.