Land Pride at 2560, AT2572, FD2560 Important Safety Information, Use Safety Lights and Devices

Page 4

Table of Contents

Important Safety Information

Land Pride

These are common practices that may or may not be applicable to the products described in this manual.

Use Safety

Lights and Devices

Slow moving tractors, self- propelled equipment, and towed implements can create a hazard when driven on public roads. They are difficult to see, especially at night.

Flashing warning lights and turn signals are recommended whenever driving on public roads. Use lights and devices provided with implement.

Transport

Machinery Safely

Comply with state and local laws.

Maximum transport speed for implement is 20 mph. DO NOT EXCEED. Never travel at a speed which does not allow adequate control of steering and stopping. Some rough terrain require a slower speed.

Sudden braking can cause a towed load to swerve and upset. Reduce speed if towed load is not equipped with brakes.

Use the following maximum speed - tow load weight ratios as a guideline:

20 mph when weight is less than or equal to the weight of tractor.

10 mph when weight is double the weight of tractor.

IMPORTANT: Do not tow a load that is more than double the weight of tractor.

Use A Safety Chain

A safety chain will help control drawn machinery should it separate from the tractor drawbar.

Use a chain with the strength rating equal to or greater than the gross weight of the towed machinery.

Attach the chain to the tractor drawbar support or other specified anchor location. Allow only enough slack in the chain to permit turning.

Do not use safety chain for towing.

Practice Safe Maintenance

Understand procedure before doing work. Use proper tools and equipment, refer to Operator’s Manual for additional information.

Work in a clean dry area.

Lower the implement to the ground, put tractor in park, turn off engine, and remove key before preforming maintenance.

Allow implement to cool completely.

Install all transport locks on raised drill before working underneath, refer to the Operator’s Manual for quantity and location of transport locks.

Do not grease or oil implement while it is in operation.

Move the opener handle to the “ROAD” position and complete raising the openers to lock them up before working underneath them.

Disk edges are sharp. Be careful when working in this area.

Disconnect battery ground cable (-) before servicing or adjusting electrical systems or before welding on implement.

Inspect all parts. Make sure parts are in good condition & installed properly.

Remove buildup of grease, oil or debris.

Remove all tools and unused pars from implement before operation.

2

FD2560, FD2572, AT2560 & AT2572 Grooming Mower, 3-spindle 310-148M

10/11/06

Image 4
Contents Grooming Mower, 3-spindle Table of Contents Safety at All Times Important Safety Information Use Safety Lights and DevicesUse a Safety Chain Practice Safe MaintenanceTire Safety Prepare for EmergenciesWear Protective Equipment Keep Riders Off MachinerySafety Labels 818-555C818-556C 818-130C818-142C 818-144C818-540C 818-552COwner Assistance Using This ManualIntroduction Assembly & Set-up Assembly InstructionsGeneral Description Grass Chute Assembly Gauge Wheel AssemblyFinal Inspection Driveline Installation Pre-Start InstructionsOperating Instructions Tractor RequirementsChecking Driveline Minimum Length Operating Instructions Pre-Start-up ChecklistTransporting Floating & Front To Back Hitch Adjustments AdjustmentsMower Chute Leveling The MowerCutting Height Adjustment Belt TensionGeneral Maintenance Maintenance and LubricationBlade Inspection Blade SharpeningBlade Replacement Belt InstallationStorage Belt TensionLubrication HoursSeasonally Wheel Bushing MartinWheel Bushing Neilson Bearing in Blade Spindle HubsOptions FD2560, FD2572, AT2560 & AT2572 3-Spindle Grooming Mower Specifications & CapacitiesDescription FD2560 FD2572 AT2560 AT2572 Troubleshooting Chart TroubleshootingProblem Cause Solution Tire Inflation Chart Torque Values ChartAppendix Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

FD2572, FD2560, AT2572, at 2560 specifications

Land Pride is a well-respected manufacturer in the agricultural and landscaping equipment sector, renowned for its commitment to quality, durability, and performance. Among its key offerings, the AT2560, AT2572, FD2560, and FD2572 stand out due to their innovation, functionality, and versatility.

The AT2560 and AT2572 are part of Land Pride's series of ATV and UTV attachments designed to enhance productivity in landscaping and maintenance tasks. These implements facilitate tasks such as grading, leveling, and debris management. The rugged construction ensures they can withstand the rigors of tough outdoor environments. Key features include a reinforced frame, adjustable blade angles, and the ability to easily attach and detach from various vehicles. They are designed for optimal performance, providing operators with the confidence needed to tackle diverse terrain with efficiency.

On the other hand, the FD2560 and FD2572 are versatile finish mowers, perfect for achieving a professional cut in various applications, including residential lawns, commercial properties, and sports fields. These mowers are equipped with advanced features like a floating mower deck that follows the contours of the ground, ensuring an even cut regardless of terrain. The high-performance blades provide a superior finish, while the easy height adjustment mechanism allows operators to customize cutting lengths according to their specific needs.

Both the AT and FD models leverage innovative technologies to enhance efficiency. For instance, the AT series incorporates a quick-attach mechanism that simplifies changing attachments, while the FD series includes an adjustable rear roller that gives users better control over cutting quality. Durability is a hallmark of Land Pride equipment, and both series are built with high-quality materials that stand up to demanding applications.

Overall, Land Pride's AT2560, AT2572, FD2560, and FD2572 are indicative of the brand's dedication to delivering high-quality, reliable machinery that meets the needs of both professional and amateur landscapers. With a combination of rugged design, advanced technologies, and user-friendly features, these models contribute significantly to efficient and effective land management operations. Whether smoothing out a lawn or providing a pristine finish on larger properties, Land Pride's equipment stands ready to tackle the challenge. Embracing innovation and performance, these machines represent a commitment to excellence and customer satisfaction in the ag and landscape market.