Land Pride at 2560, AT2572, FD2560 Gauge Wheel Assembly, Grass Chute Assembly, Final Inspection

Page 12

Table of Contents

Section 1: Assembly & Set-up

Land Pride

Gauge Wheel Assembly

Refer to Figure 1-5:

1.The rear gauge wheel arms (#1) are bolted to the frame backwards from factory. Remove the 3/8" x 3" long bolt (#2), hardware and gauge wheel arm (#1).

2.Bolt the rear gauge wheel arms (#1) to the mounting channels on the mower frame using 3/8" x 3" long bolt (#2) and hardware shown.

3.Insert the 1" diameter shaft of the gauge wheel yoke (#3) into the bushings on the gauge wheel arm (#1), noting the amount of spacers (#4) added to top or bottom depending on cutting height {refer to Section 3 “Cutting Height Adjustments” on Page 15}.

4.Secure shaft to wheel arm with 1/4" lock pin (#5). Be sure all the spacers are arranged the same on each wheel assembly. Tighten all hardware to values listed in the “Torque Values Chart” in the appendix.

Grass Chute Assembly

Refer to Figure 1-5:

1.Loosen upper pivot bolt (#1) and remove lower thumb screw (#2).

Hinge chute down and install thumb screw (#2) and flat washer(#3). When set at position desired, tighten down upper pivot bolt (#1) and lock nut (#4). Do not tighten completely. Allow chute to hinge. Lock down lower thumb screw (#2) with flat washer (#3).

2.

13544

Grass Chute Assembly

Figure 1-6

Final Inspection

After completing the “Dealer Assembly and Setup” section, fill out the “Warranty Registration Form & Inspection Report” in this manual.

13577

Gauge Wheel Assembly

Figure 1-5

10 FD2560, FD2572, AT2560 & AT2572 Grooming Mower, 3-spindle 310-148M

10/11/06

Image 12
Contents Grooming Mower, 3-spindle Table of Contents Safety at All Times Important Safety Information Use Safety Lights and DevicesUse a Safety Chain Practice Safe MaintenanceTire Safety Prepare for EmergenciesWear Protective Equipment Keep Riders Off MachinerySafety Labels 818-555C818-556C 818-130C818-142C 818-144C818-540C 818-552CUsing This Manual Owner AssistanceIntroduction Assembly Instructions Assembly & Set-upGeneral Description Gauge Wheel Assembly Grass Chute AssemblyFinal Inspection Driveline Installation Pre-Start InstructionsOperating Instructions Tractor RequirementsChecking Driveline Minimum Length Pre-Start-up Checklist Operating InstructionsTransporting Floating & Front To Back Hitch Adjustments AdjustmentsMower Chute Leveling The MowerCutting Height Adjustment Belt TensionGeneral Maintenance Maintenance and LubricationBlade Inspection Blade SharpeningBlade Replacement Belt InstallationStorage Belt TensionLubrication HoursSeasonally Wheel Bushing MartinWheel Bushing Neilson Bearing in Blade Spindle HubsOptions Specifications & Capacities FD2560, FD2572, AT2560 & AT2572 3-Spindle Grooming MowerDescription FD2560 FD2572 AT2560 AT2572 Troubleshooting Troubleshooting ChartProblem Cause Solution Torque Values Chart Tire Inflation ChartAppendix Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

FD2572, FD2560, AT2572, at 2560 specifications

Land Pride is a well-respected manufacturer in the agricultural and landscaping equipment sector, renowned for its commitment to quality, durability, and performance. Among its key offerings, the AT2560, AT2572, FD2560, and FD2572 stand out due to their innovation, functionality, and versatility.

The AT2560 and AT2572 are part of Land Pride's series of ATV and UTV attachments designed to enhance productivity in landscaping and maintenance tasks. These implements facilitate tasks such as grading, leveling, and debris management. The rugged construction ensures they can withstand the rigors of tough outdoor environments. Key features include a reinforced frame, adjustable blade angles, and the ability to easily attach and detach from various vehicles. They are designed for optimal performance, providing operators with the confidence needed to tackle diverse terrain with efficiency.

On the other hand, the FD2560 and FD2572 are versatile finish mowers, perfect for achieving a professional cut in various applications, including residential lawns, commercial properties, and sports fields. These mowers are equipped with advanced features like a floating mower deck that follows the contours of the ground, ensuring an even cut regardless of terrain. The high-performance blades provide a superior finish, while the easy height adjustment mechanism allows operators to customize cutting lengths according to their specific needs.

Both the AT and FD models leverage innovative technologies to enhance efficiency. For instance, the AT series incorporates a quick-attach mechanism that simplifies changing attachments, while the FD series includes an adjustable rear roller that gives users better control over cutting quality. Durability is a hallmark of Land Pride equipment, and both series are built with high-quality materials that stand up to demanding applications.

Overall, Land Pride's AT2560, AT2572, FD2560, and FD2572 are indicative of the brand's dedication to delivering high-quality, reliable machinery that meets the needs of both professional and amateur landscapers. With a combination of rugged design, advanced technologies, and user-friendly features, these models contribute significantly to efficient and effective land management operations. Whether smoothing out a lawn or providing a pristine finish on larger properties, Land Pride's equipment stands ready to tackle the challenge. Embracing innovation and performance, these machines represent a commitment to excellence and customer satisfaction in the ag and landscape market.