Land Pride AT2572, at 2560 Pre-Start Instructions, Driveline Installation, Operating Instructions

Page 13

Land Pride

Table of Contents

Section 2: Operating Instructions

General Description

The operator is responsible for the safe use of this machine. Read and understand the safety section before continuing.

This section covers the procedures needed to operate this machine. Properly read and understand this section before operating.

Pre-Start Instructions

Tractor Requirements

This mower is designed with a 3-Point category I hitch. Horse power rating of the tractor should not exceed 30 PTO horse power on 60 inch units and 35 PTO horse power on 72 inch units. PTO Speed of tractor should be 540 RPM.

NOTE: In order to maintain steering control, ballast

 

may have to be added to your tractor. To determine

Front Position Hitch Adjustment

whether or not to add ballast, refer to your tractor

Figure 2-1

operator’s manual for weight requirements and to the

 

“Specifications and Capacities” chart for the weight

 

of the unit.

 

 

 

Tractor Hook-Up

1.Be certain that the tractor draw bar will not interfere. Move draw bar ahead or remove if required. Draw bar should also be checked for clearance when unit is being raised for the first time.

2.Align lower link arms of tractor to hitch lugs on mower. Insert lower hitch pins into lower ball swivels and attach lynch pins.

3.Referring to Figure 2-1, attach tractor top link to upper floating hitch on mower with pin supplied.

4.Adjust the tractor top link in or out to place the upper hitch pin vertically above the lower hitch pins as shown in Figure 2-2, to allow mower flotation.

NOTE: The initial position of the Upper Hitch Arms and the Lower Hitch Lugs should be in the back position. If there is a clearance problem refer to the “Adjustment Section” under “Floating & Front To Back Hitch Adjustments” page 14.

11915

Back Position Floating Hitch Adjustment

Figure 2-2

Driveline Installation

An additional driveline may be required if the mower is to be used on more than one tractor especially if a quick hitch is used.

!CAUTION

Tractor PTO shield and all Grooming Mower guards must be in place at all times during operation!

!CAUTION

Do not use a PTO adaptor with a quick hitch. A PTO adapter will increase strain on the tractor’s PTO shaft resulting in possible damage the shaft and driveline.

!WARNING

Damaged drivelines can cause serious injury or death.

!WARNING

Damaged drivelines can cause serious injury or death.

!CAUTION

Always engage parking brake, shut off tractor and remove key before dismounting from tractor.

10/11/06

FD2560, FD2572, AT2560 & AT2572 Grooming Mower, 3-spindle 310-148M

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Grooming Mower, 3-spindle Table of Contents Safety at All Times Use Safety Lights and Devices Important Safety InformationUse a Safety Chain Practice Safe MaintenancePrepare for Emergencies Tire SafetyWear Protective Equipment Keep Riders Off Machinery818-555C Safety Labels818-130C 818-556C818-144C 818-142C818-552C 818-540COwner Assistance Using This ManualIntroduction Assembly & Set-up Assembly InstructionsGeneral Description Grass Chute Assembly Gauge Wheel AssemblyFinal Inspection Pre-Start Instructions Driveline InstallationOperating Instructions Tractor RequirementsChecking Driveline Minimum Length Operating Instructions Pre-Start-up ChecklistTransporting Adjustments Floating & Front To Back Hitch AdjustmentsMower Chute Leveling The MowerBelt Tension Cutting Height AdjustmentMaintenance and Lubrication General MaintenanceBlade Inspection Blade SharpeningBelt Installation Blade ReplacementStorage Belt TensionHours LubricationWheel Bushing Martin SeasonallyWheel Bushing Neilson Bearing in Blade Spindle HubsOptions FD2560, FD2572, AT2560 & AT2572 3-Spindle Grooming Mower Specifications & CapacitiesDescription FD2560 FD2572 AT2560 AT2572 Troubleshooting Chart TroubleshootingProblem Cause Solution Tire Inflation Chart Torque Values ChartAppendix Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

FD2572, FD2560, AT2572, at 2560 specifications

Land Pride is a well-respected manufacturer in the agricultural and landscaping equipment sector, renowned for its commitment to quality, durability, and performance. Among its key offerings, the AT2560, AT2572, FD2560, and FD2572 stand out due to their innovation, functionality, and versatility.

The AT2560 and AT2572 are part of Land Pride's series of ATV and UTV attachments designed to enhance productivity in landscaping and maintenance tasks. These implements facilitate tasks such as grading, leveling, and debris management. The rugged construction ensures they can withstand the rigors of tough outdoor environments. Key features include a reinforced frame, adjustable blade angles, and the ability to easily attach and detach from various vehicles. They are designed for optimal performance, providing operators with the confidence needed to tackle diverse terrain with efficiency.

On the other hand, the FD2560 and FD2572 are versatile finish mowers, perfect for achieving a professional cut in various applications, including residential lawns, commercial properties, and sports fields. These mowers are equipped with advanced features like a floating mower deck that follows the contours of the ground, ensuring an even cut regardless of terrain. The high-performance blades provide a superior finish, while the easy height adjustment mechanism allows operators to customize cutting lengths according to their specific needs.

Both the AT and FD models leverage innovative technologies to enhance efficiency. For instance, the AT series incorporates a quick-attach mechanism that simplifies changing attachments, while the FD series includes an adjustable rear roller that gives users better control over cutting quality. Durability is a hallmark of Land Pride equipment, and both series are built with high-quality materials that stand up to demanding applications.

Overall, Land Pride's AT2560, AT2572, FD2560, and FD2572 are indicative of the brand's dedication to delivering high-quality, reliable machinery that meets the needs of both professional and amateur landscapers. With a combination of rugged design, advanced technologies, and user-friendly features, these models contribute significantly to efficient and effective land management operations. Whether smoothing out a lawn or providing a pristine finish on larger properties, Land Pride's equipment stands ready to tackle the challenge. Embracing innovation and performance, these machines represent a commitment to excellence and customer satisfaction in the ag and landscape market.
Top Page Image Contents