HP Book 900 manual Removing the Keyboard Reassembly Notes

Screw, M2.5×4mm

Keyboard-screw cover

Keyboard

Keyboard flex cable

Pointing stick flex cable

Figure 2-7. Removing the Keyboard

Reassembly Notes

∙To connect the flex cables, lay the keyboard upside-down on the front section of the top case.

∙Fold the keyboard back into place. Slip its front tabs into the slots, then snap the back edge into place.

∙Push the keyboard toward the back as you tighten the two screws. This helps engage the tab at the back-center of the keyboard.

HP OmniBook 900 Removal and Replacement 2-13