HP Book 900 manual Removing the Bios IC Reassembly Notes

IC removal tool

Figure 2-14. Removing the BIOS IC

Reassembly Notes

Caution

∙Align the IC with the slot in the socket. The IC is keyed to fit correctly. If you insert the IC backward, the IC or motherboard could be damaged.

∙Press down firmly on the IC with your thumb to ensure a proper connection.

∙Fold the keyboard back into place. Slip its front tabs into the slots, then snap the back edge into place.

∙Push the keyboard toward the back as you tighten the two screws. This helps engage the tab at the back-center of the keyboard.

∙Reprogram the IC by programming the BIOS—see the note above.

HP OmniBook 900 Removal and Replacement 2-25