Land Pride RC35120 RCM35120 manual Tractor Requirements, Lift-Type Cutter, Hitch & Axle Assembly

Page 9

Land Pride

Section 1 Assembly and Setup

Section 1 Assembly and Setup

Tractor Requirements

 

1/2" x 1" x 1 1/8" long spacer (#12) and hitch brace

The lift-type cutter is designed with a category II hitch.

 

(#6) on inboard side of pivot. Secure with a 1" x

Both Lift and Pull-Type Cutters are designed for tractors

 

9 1/2" long bolt (#13), flat washer (#14), and lock

with a minimum PTO horsepower rating of 50 HP and

 

nut (#8).

maximum of 120 HP. Adequate front end weight is re-

c.

Attach axle on the left hand side of cutter with

quired on tractors for use with lift-type cutter.

 

1 1/2" x 1" x 1 1/8" long spacer (#12) on both sides

Lift-Type Cutter

 

of pivot attach hitch brace (#6) on inboard side of

 

pivot. Secure with a 1" x 9" long bolt (#15), flat

Refer to Figure 1-1:

 

 

washer (#14), and lock nut (#8)

 

 

 

 

Hitch & Axle Assembly

d.

Install outboard axle mounts (#33) to deck mount-

 

 

 

 

ed support (#34) with pivot shaft pin (#35) and se-

 

 

 

 

 

NOTE: Do not tighten hardware until assembly is

 

 

cure with 1/4” -20 x 1 1/2” long hex bolt (#36) and

 

complete.

 

 

lock nut (#37).

 

 

 

 

 

 

1. Assemble hitch straps (#1) to inside of lower hitch an-

NOTE: 1" bolts should be installed pointing outboard.

 

 

gles welded to cutter deck with 1 1/8" hitch pin (#2)

 

 

 

 

 

 

lock washers (#3) and nuts (#4).

 

 

 

2.Install pivoting upper hitch (#5) to inside of hitch straps with hitch braces (#6) on the outside. Do not attach other end of hitch braces at this time. Install 1" x 6 1/2" long bolt (#7) and lock nut (#8). Do not tighten bolts at this time.

3.Attach axle assembly (#9) to rear of cutter:

a.Position axle as shown.

b.Attach axle on the right hand side of cutter with cylinder pivot lug (#10) and 1 1/2" x 1" x 1 7/8" long spacer (#11) on outboard side of pivot, and 1

e.Fasteners for hitch straps (#1) and pivoting upper hitch (#5) can now be tightened. Do not over tight- en 1" x 6 1/2" long upper hitch bolt (#7). Upper hitch must be free to pivot.

4.If cutter is equipped with ratchet height adjustment:

f.Install ratchet (#16) and secure with pins and clips furnished with ratchet.

5.If cutter is equipped with hydraulic height adjustment:

g.Install 3 1/2" x 8" hydraulic cylinder (#17) and se- cure with 1" pins and clips furnished with cylinder.

11/16/00

RC35120 RCM35120 Rotary Cutter 312-301M

7

Image 9
Contents RC35120 RCM35120 Operator’s t ’s Manual lTable of Contents Important Safety Information 818-130C 818-161C818-187C 818-187C 818-229C 818-230C818-240C 818-554C 818-552C818-555C 818-556C 818-557C Owner Assistance Using This ManualHitch & Axle Assembly Tractor RequirementsLift-Type Cutter Refer back to Figure TailwheelTongue Pull-Type CutterLeveling Rod Rear AxleSafety Guards Driveline InstallationTractor Hook-Up Lift-Type CutterIf check chain kit is purchased, assemble to cutter Pull-Type Tractor Hook-Up Transporting Operating Check ListCutting Instructions Operating Instructions Deck Attitude Adjustment Lift-Type Cutting HeightPull-Type Cutting Height Driveline yoke or cross failing Problem Cause Solution Oil seal leakingDriveline Clutch slippingProblem Cause Solution Excessive vibration Skid Shoe Service & Replacement MaintenanceService Cutting Blades Flex CouplersClutch Run-In StorageLubrication Pivoting Upper HitchPull-Type Tailwheel Hub Lift-Type Tailwheel HubRatchet Jack Driveline U-JointsDriveline GearboxBox Assembly Plate Slip Clutch DisassemblySpecifications and Capacities Appendix Torque Values Chart for Common Bolt SizesWarranty Great Plains Manufacturing, Inc

RC35120 RCM35120 specifications

The Land Pride RC35120, part of the RCM35120 series, stands out in the agriculture and landscaping sectors for its robust design and exceptional performance. This remote-controlled mower is engineered to handle a variety of mowing tasks with precision and ease, making it a popular choice among professionals and hobbyists alike.

One of its main features is the powerful engine that drives the RC35120, providing ample horsepower to tackle tough terrain and thick grass. The mower's high-performance engine ensures that it can operate efficiently even in challenging conditions, making it a reliable option for extensive landscaping projects.

The RC35120 is equipped with an advanced remote control system that allows operators to maneuver the mower from a safe distance. This feature is especially beneficial in hazardous or difficult-to-reach areas, as it reduces the risk of injury and increases operational efficiency. The ergonomic remote control design is intuitive, allowing users to adjust speed and direction with ease, enabling precise navigation around obstacles.

Another key characteristic of the RC35120 is its high-quality cutting deck. The mower features a reinforced deck that provides durability and longevity, capable of withstanding the rigors of regular use. The cutting height can be easily adjusted, allowing for flexibility in mowing preferences and different grass types. With a cutting width of 35 inches, the RC35120 allows operators to cover large areas swiftly, ultimately saving time and reducing labor costs.

Additionally, the RC35120 incorporates safety features that enhance both usage and operational peace of mind. The mower is built with protective guards to shield the operator from debris while mowing. Furthermore, automatic shut-off systems are implemented to halt operation in the event of a malfunction, promoting safety during use.

In terms of technology, the RC35120 integrates modern features such as easy maintenance access and an effective cooling system that ensures the engine stays within optimal temperature ranges during operation. These attributes not only prolong the life of the mower but also improve overall performance.

In summary, the Land Pride RC35120 RCM35120 mower is an exceptional tool that combines power, efficiency, and safety. Its innovative design, robust features, and advanced technologies make it an ideal choice for anyone looking to enhance their landscaping capabilities with a top-tier remote-controlled mower. Whether for commercial use or personal landscaping, this model delivers reliability and exceptional results.