Land Pride RC35120 RCM35120 manual Rear Axle, Leveling Rod

Page 12

Land Pride

Section 1 Assembly and Setup

Rear Axle

Refer to Figure 1-4:

1.Attach axle assembly (#1) to rear of cutter:

h.Position axle as shown.

i.Attach axle on the right hand side of cutter with cylinder pivot lug (#2) and 1 1/2” x 1 7/8” long spacer (#3) on outboard side of pivot, and 1 1/2” x 1” x 1 1/8” long spacer (#4) on inboard side of piv- ot. Secure with a 1” x 9” long bolt (#5), flat washer (#6), and lock nut (#7).

j.Attach axle on left hand side of cutter with

1 1/2” x 1” x 1 1/8” spacer (#4) on both sides of piv- ot. Secure with a 1” x 8 1/2” long bolt (#8), flat washer (#16), and lock nut (#7).

k.Install outboard axle mounts (#26) to deck mount- ed supports (#27) with pivot shaft pin (#23) and secure with 1/4” -20 x 1 1/2” long hex bolt (#25) and lock nut (#24).

NOTE: 1” bolts should be installed pointing outboard.

NOTE: Axle arms can be installed with wheels to the inboard or outboard side.

2.Install rubber bumpers (#15) one on top side of axle arm mount and one below and secure with 1/2” x 8” long bolt (#16), rubber stop washer (#17), flat washer (#19), and lock nut (#18). Tighten lock nut until rubber bumper compresses to 1 3/4”. Refer to

Figure 1-2.

3.Attach wheels with tires mounted (#20) or 15” rims (not shown) to hubs (#21) with 1/2” -20 x 1 1/8” long flange bolts (#22).

Leveling Rod

Refer back to Figure 1-3:

NOTE: The leveling rod is to be installed on the left hand side of the cutter.

1. Insert leveling rod (#13) through trunnion (#14).

2.Install 3 1/2” x 8” hydraulic cylinder (#9) and secure with 1” pins and clips furnished with cylinder.

3.Route hoses (#10) through hydraulic hose loop (#7) Refer back to Figure 1-3.

Tailwheel

Refer to Figure 1-4:

1.Attach axle arm weldment (#11) to axle arm mount with 1” pin (#12) and secure with 5/16” x 2” long bolt (#16) and lock nut (#14).

2.Screw leveling tube (#5) over leveling rod (#13) and secure with 1” jam nut (#16).

3.Refer to Figure 1-4,attach clevis end (#28) of leveling rod to lug (#29) tailwheel axle with 1” x 2” clevis pin (#30) and secure with hair pin clips (#31).

NOTE: The leveling rod should be adjusted to level the cutter after attaching cutter to tractor.

14258

Pull-Type Tailwheel & Rear Axle Assembly

Figure 1-4

10 RC35120 RCM35120 Rotary Cutter 312-301M

11/16/00

Image 12
Contents Operator’s t ’s Manual l RC35120 RCM35120Table of Contents Important Safety Information 818-130C 818-161C818-187C 818-187C 818-229C 818-230C818-240C 818-552C 818-554C818-555C 818-556C 818-557C Using This Manual Owner AssistanceHitch & Axle Assembly Tractor RequirementsLift-Type Cutter Tailwheel Refer back to FigurePull-Type Cutter TongueRear Axle Leveling RodDriveline Installation Safety GuardsTractor Hook-Up Lift-Type CutterIf check chain kit is purchased, assemble to cutter Pull-Type Tractor Hook-Up Transporting Operating Check ListCutting Instructions Operating Instructions Deck Attitude Adjustment Lift-Type Cutting HeightPull-Type Cutting Height Problem Cause Solution Oil seal leaking Driveline yoke or cross failingDriveline Clutch slippingProblem Cause Solution Excessive vibration Maintenance Skid Shoe Service & ReplacementService Cutting Blades Flex CouplersStorage Clutch Run-InLubrication Pivoting Upper HitchLift-Type Tailwheel Hub Pull-Type Tailwheel HubRatchet Jack Driveline U-JointsDriveline GearboxBox Plate Slip Clutch Disassembly AssemblySpecifications and Capacities Torque Values Chart for Common Bolt Sizes AppendixWarranty Great Plains Manufacturing, Inc

RC35120 RCM35120 specifications

The Land Pride RC35120, part of the RCM35120 series, stands out in the agriculture and landscaping sectors for its robust design and exceptional performance. This remote-controlled mower is engineered to handle a variety of mowing tasks with precision and ease, making it a popular choice among professionals and hobbyists alike.

One of its main features is the powerful engine that drives the RC35120, providing ample horsepower to tackle tough terrain and thick grass. The mower's high-performance engine ensures that it can operate efficiently even in challenging conditions, making it a reliable option for extensive landscaping projects.

The RC35120 is equipped with an advanced remote control system that allows operators to maneuver the mower from a safe distance. This feature is especially beneficial in hazardous or difficult-to-reach areas, as it reduces the risk of injury and increases operational efficiency. The ergonomic remote control design is intuitive, allowing users to adjust speed and direction with ease, enabling precise navigation around obstacles.

Another key characteristic of the RC35120 is its high-quality cutting deck. The mower features a reinforced deck that provides durability and longevity, capable of withstanding the rigors of regular use. The cutting height can be easily adjusted, allowing for flexibility in mowing preferences and different grass types. With a cutting width of 35 inches, the RC35120 allows operators to cover large areas swiftly, ultimately saving time and reducing labor costs.

Additionally, the RC35120 incorporates safety features that enhance both usage and operational peace of mind. The mower is built with protective guards to shield the operator from debris while mowing. Furthermore, automatic shut-off systems are implemented to halt operation in the event of a malfunction, promoting safety during use.

In terms of technology, the RC35120 integrates modern features such as easy maintenance access and an effective cooling system that ensures the engine stays within optimal temperature ranges during operation. These attributes not only prolong the life of the mower but also improve overall performance.

In summary, the Land Pride RC35120 RCM35120 mower is an exceptional tool that combines power, efficiency, and safety. Its innovative design, robust features, and advanced technologies make it an ideal choice for anyone looking to enhance their landscaping capabilities with a top-tier remote-controlled mower. Whether for commercial use or personal landscaping, this model delivers reliability and exceptional results.