Land Pride RC35120 RCM35120 manual Storage, Clutch Run-In, Lubrication, Pivoting Upper Hitch

Page 22

Land Pride

Section 5 Maintenance and Lubrication

halfway into disks.

Flex Couplers

Figure 5-3

14560

The clutch should slip during operation to protect the cut- ter from excessive loads.

Prior to initial operation and after long periods of inactivity, the Friction Clutch should be "run-in".

1.Tighten all 4 nuts uniformly until the spring load is low enough that the clutch slips freely with the PTO en- gaged.

2.Turn nuts fully back. Clutch is ready for use.

Storage

At the end of the working season or when the cutter will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated on the cut- ter and any of the moving parts.

1. Clean the Rotary Cutter as necessary.

Clutch Run-In

Refer to Figure 5-4:

2.Check the blades for wear and replace if necessary.

3.Inspect the cutter for loose, damaged or worn parts and adjust or replace as needed.

4.Lubricate as noted in "Lubrication", below.

5.Store the Rotary Cutter inside if possible for longer Rotary Cutter life.

6.Repaint parts where paint is worn or scratched to pre- vent rust. Ask your dealer for Aerosol Land Pride Beige touch-up paint #821-011C.

Clutch Run-In

10103

Figure 5-4

 

Lubrication

Lubrication

Legend

Multipurpose

Multipurpose

Multipurpose

50

spray lube

grease lube

oil lube

 

Intervals at which lubrication is required

14265

24

Pivoting Upper Hitch

Type of Lubrication: Multipurpose Grease

Quantity = 6 pumps

 

 

 

24

 

 

 

Lift-Type Tailwheel Spindle Hub

 

 

 

Type of Lubrication: Multipurpose Grease

 

 

 

Quantity = 6 pumps

14268

 

 

20

RC35120 RCM35120 Rotary Cutter

312-301M

11/16/00

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operator’s t ’s Manual l RC35120 RCM35120Table of Contents Important Safety Information 818-161C 818-130C818-187C 818-230C 818-187C 818-229C818-240C 818-552C 818-554C818-555C 818-556C 818-557C Using This Manual Owner AssistanceTractor Requirements Hitch & Axle AssemblyLift-Type Cutter Tailwheel Refer back to FigurePull-Type Cutter TongueRear Axle Leveling RodTractor Hook-Up Driveline InstallationSafety Guards Lift-Type CutterIf check chain kit is purchased, assemble to cutter Pull-Type Tractor Hook-Up Operating Check List TransportingCutting Instructions Operating Instructions Lift-Type Cutting Height Deck Attitude AdjustmentPull-Type Cutting Height Driveline Problem Cause Solution Oil seal leakingDriveline yoke or cross failing Clutch slippingProblem Cause Solution Excessive vibration Service Cutting Blades MaintenanceSkid Shoe Service & Replacement Flex CouplersLubrication StorageClutch Run-In Pivoting Upper HitchRatchet Jack Lift-Type Tailwheel HubPull-Type Tailwheel Hub Driveline U-JointsGearbox DrivelineBox Plate Slip Clutch Disassembly AssemblySpecifications and Capacities Torque Values Chart for Common Bolt Sizes AppendixWarranty Great Plains Manufacturing, Inc

RC35120 RCM35120 specifications

The Land Pride RC35120, part of the RCM35120 series, stands out in the agriculture and landscaping sectors for its robust design and exceptional performance. This remote-controlled mower is engineered to handle a variety of mowing tasks with precision and ease, making it a popular choice among professionals and hobbyists alike.

One of its main features is the powerful engine that drives the RC35120, providing ample horsepower to tackle tough terrain and thick grass. The mower's high-performance engine ensures that it can operate efficiently even in challenging conditions, making it a reliable option for extensive landscaping projects.

The RC35120 is equipped with an advanced remote control system that allows operators to maneuver the mower from a safe distance. This feature is especially beneficial in hazardous or difficult-to-reach areas, as it reduces the risk of injury and increases operational efficiency. The ergonomic remote control design is intuitive, allowing users to adjust speed and direction with ease, enabling precise navigation around obstacles.

Another key characteristic of the RC35120 is its high-quality cutting deck. The mower features a reinforced deck that provides durability and longevity, capable of withstanding the rigors of regular use. The cutting height can be easily adjusted, allowing for flexibility in mowing preferences and different grass types. With a cutting width of 35 inches, the RC35120 allows operators to cover large areas swiftly, ultimately saving time and reducing labor costs.

Additionally, the RC35120 incorporates safety features that enhance both usage and operational peace of mind. The mower is built with protective guards to shield the operator from debris while mowing. Furthermore, automatic shut-off systems are implemented to halt operation in the event of a malfunction, promoting safety during use.

In terms of technology, the RC35120 integrates modern features such as easy maintenance access and an effective cooling system that ensures the engine stays within optimal temperature ranges during operation. These attributes not only prolong the life of the mower but also improve overall performance.

In summary, the Land Pride RC35120 RCM35120 mower is an exceptional tool that combines power, efficiency, and safety. Its innovative design, robust features, and advanced technologies make it an ideal choice for anyone looking to enhance their landscaping capabilities with a top-tier remote-controlled mower. Whether for commercial use or personal landscaping, this model delivers reliability and exceptional results.
Top Page Image Contents