Land Pride RC35120 RCM35120 manual Lift-Type Cutting Height, Pull-Type Cutting Height

Page 18

 

 

Land Pride

 

Section 3 Adjustments

 

 

 

 

 

 

 

Section 3 Adjustments

 

 

 

 

 

 

 

 

 

Lift-Type Cutting Height

4. Adjust the tractor’s lower 3-point hitch arms to level

 

Refer to Figure 3-1:

cutter left to right. Set tractor 3-point depth stop when

 

cutter is level to maintain a consistent mowing weight.

 

 

!CAUTION!

Engage parking brake, shut off tractor, remove key and disen- gage PTO before making any height adjustments!

1.Lower cutter onto safely supported blocks to desired cutting height. Be certain cutter is level.

2.If cutter is equipped with optional hydraulic height ad- justment, connect cylinder hoses to tractor remote outlets.

3.Adjust the cutting height using ratchet jack or hydrau- lically if equipped with hydraulic cylinder.

Lift-Type Cutting Height Adjustment

Figure 3-1

Pull-Type Cutting Height

1.The cutting height can be adjusted by extending or re- tracting the hydraulic cylinder to the desired cutting height.

14263

2.Once the cutter has been leveled, it will remain level regardless of change in cutting height unless tractor drawbar height or tailwheel size is changed.

3.Should the cutter require additional leveling adjust- ment:

a.Turn nut on leveling tube counterclockwise to low- er front of cutter and clockwise to raise front of cut- ter.

b.Secure with jam nut.

Deck Attitude Adjustment

Refer to Figure 3-2:

This adjustment is very important. With the deck posi- tioned at this attitude, the blades will be cutting material only at the front of the cutter. If the deck is level, or the rear of the cutter is lower than the front, the blades are subject to continuous material flow which results in additional blade wear and horsepower loss as well as more frequent blade sharpening.

Deck Attitude Adjustment

Figure 3-2

14264

16 RC35120 RCM35120 Rotary Cutter 312-301M

11/16/00

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operator’s t ’s Manual l RC35120 RCM35120Table of Contents Important Safety Information 818-130C 818-161C818-187C 818-187C 818-229C 818-230C818-240C 818-552C 818-554C818-555C 818-556C 818-557C Using This Manual Owner AssistanceHitch & Axle Assembly Tractor RequirementsLift-Type Cutter Tailwheel Refer back to FigurePull-Type Cutter TongueRear Axle Leveling RodTractor Hook-Up Driveline InstallationSafety Guards Lift-Type CutterIf check chain kit is purchased, assemble to cutter Pull-Type Tractor Hook-Up Transporting Operating Check ListCutting Instructions Operating Instructions Deck Attitude Adjustment Lift-Type Cutting HeightPull-Type Cutting Height Driveline Problem Cause Solution Oil seal leakingDriveline yoke or cross failing Clutch slippingProblem Cause Solution Excessive vibration Service Cutting Blades MaintenanceSkid Shoe Service & Replacement Flex CouplersLubrication StorageClutch Run-In Pivoting Upper HitchRatchet Jack Lift-Type Tailwheel HubPull-Type Tailwheel Hub Driveline U-JointsDriveline GearboxBox Plate Slip Clutch Disassembly AssemblySpecifications and Capacities Torque Values Chart for Common Bolt Sizes AppendixWarranty Great Plains Manufacturing, Inc

RC35120 RCM35120 specifications

The Land Pride RC35120, part of the RCM35120 series, stands out in the agriculture and landscaping sectors for its robust design and exceptional performance. This remote-controlled mower is engineered to handle a variety of mowing tasks with precision and ease, making it a popular choice among professionals and hobbyists alike.

One of its main features is the powerful engine that drives the RC35120, providing ample horsepower to tackle tough terrain and thick grass. The mower's high-performance engine ensures that it can operate efficiently even in challenging conditions, making it a reliable option for extensive landscaping projects.

The RC35120 is equipped with an advanced remote control system that allows operators to maneuver the mower from a safe distance. This feature is especially beneficial in hazardous or difficult-to-reach areas, as it reduces the risk of injury and increases operational efficiency. The ergonomic remote control design is intuitive, allowing users to adjust speed and direction with ease, enabling precise navigation around obstacles.

Another key characteristic of the RC35120 is its high-quality cutting deck. The mower features a reinforced deck that provides durability and longevity, capable of withstanding the rigors of regular use. The cutting height can be easily adjusted, allowing for flexibility in mowing preferences and different grass types. With a cutting width of 35 inches, the RC35120 allows operators to cover large areas swiftly, ultimately saving time and reducing labor costs.

Additionally, the RC35120 incorporates safety features that enhance both usage and operational peace of mind. The mower is built with protective guards to shield the operator from debris while mowing. Furthermore, automatic shut-off systems are implemented to halt operation in the event of a malfunction, promoting safety during use.

In terms of technology, the RC35120 integrates modern features such as easy maintenance access and an effective cooling system that ensures the engine stays within optimal temperature ranges during operation. These attributes not only prolong the life of the mower but also improve overall performance.

In summary, the Land Pride RC35120 RCM35120 mower is an exceptional tool that combines power, efficiency, and safety. Its innovative design, robust features, and advanced technologies make it an ideal choice for anyone looking to enhance their landscaping capabilities with a top-tier remote-controlled mower. Whether for commercial use or personal landscaping, this model delivers reliability and exceptional results.
Top Page Image Contents