Marantz SR8001, SR7001 manual Surround Setup, Channel Level

3 SURROUND SETUP

This menu is for setting surround effect parameters for the various surround input signals so as to bring out the live audio effect of your speaker system.

• CHANNEL LEVEL:

“3-1 CHANNEL LEVEL” (see page 33)

• PLIIx MUSIC PARAMETER:

“3-2 PLIIx MUSIC PARAMETER” (see page 34)

• CSII PARAMETER:

3	. SURR	SETUP
CHANNEL LEVEL
PL x	MUSIC	PARAMETER
CS	PARAMETER
NEO:6	PARAMETER
RE - EQ		: OFF
LFE LEVEL		:
RETURN		NEXT EXIT

☞ P. 33 ☞ P. 34

3-1 CHANNEL LEVEL

1. Select “3. SURR SETUP” from MAIN MENU with 3 or 4 cursor buttons and press the OK/ ENTER button.

2. Select “CHANNEL LEVEL” with the 3 or 4 cursor buttons and press the OK/ENTER button.

3. Set the SURR. MODE with the 1 or 2 cursor

ENGLISH

“3-3 CSII PARAMETER” (see page 34)

• NEO:6 PARAMETER:

“3-4 NEO:6 PARAMETER” (see page 34)

1. Select “3. SURR SETUP” from the MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.

2. Select the desired menu with the 3 or 4 cursor buttons and press the OK/ENTER button.

3	. SURR	SETUP
CHANNEL LEVEL
PL x	MUSIC		PARAMETER
CS	PARAMETER
NEO:6	PARAMETER
RE - EQ		: OFF
LFE LEVEL		:

CHANNEL LEVEL

SURR . MODE:

AUTO

CENTER		:	0 . 0dB
SURR . R		:	0 . 0dB
SURR . B	R	:	0 . 0dB
SURR . B	L	:	0 . 0dB
SURR . L		:	0 . 0dB
SUB W		:	0 . 0dB
RETURN			EXIT

☞P. 34

PLx MUSIC PARAMETER

PARAMETER : DEFAULT

PANORAMA :OFF

DIMENSION : 0

CENTER WIDTH: 3

CS	PARAMETER
TRUBASS	:	0
SRS DIALOG :		0
RETURN		NEXT	EXIT
☞ P. 34
NEO:6	PARAMETER
CENTER	GAIN	: 0 .	3

buttons.

CHANNEL LEVEL

SURR . MODE:

AUTO

CENTER		:	0 . 0dB
SURR . L		:	0 . 0dB
SURR . R		:	0 . 0dB
SURR . BACK	L	:	0 . 0dB
SURR . BACK	R	:	0 . 0dB
SUB W		:	0 . 0dB
RETURN			EXIT

4. Select the desired menu item with the 3 or 4 cursor buttons, set the desired level with the 1 or 2 cursor buttons, and press the OK/ENTER button.

SURROUND MODE:

RETURN NEXT EXIT

RE-EQ:

Turns THX Cinema Re-EQ™ on and off.

Select the Cinema Re-EQ™ with the 1 or 2 cursor button to activate it.

LFE LEVEL:

Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select “0dB”, “–10 dB” or “OFF” with 1 or 2 cursor button.

After you complete this portion of the setup, move the cursor to “RETURN” with the 3, 4, 1, 2 cursor buttons and press the OK/ENTER button.

RETURN NEXT EXIT RETURN NEXT EXIT

Note:

•After you complete this portion of the setup, press the OK/ENTER button to move the cursor to “RETURN” and press the OK/ENTER button again to go to sub-menu.

The surround mode can be independently set for

3modes.

1.Multi Ch STEREO

2.CSII

3.Others

CHANNEL LEVEL

CENTER LEVEL:

Set the effect level of the center speaker between –12and +12 level in 0.5 level interval .

•If “NONE” was selected for the center speaker setting in the SPEAKER SIZE, then this setting will not appear.

SURR L or R LEVEL:

Set the effect level of the Surround speaker between –12and +12 level in 0.5 level interval .

•If “NONE” was selected for the surround speakers setting in the SPEAKER SIZE, then this setting will not appear.

SURR. BACK L or R LEVEL:

Set the effect level of the Surround Back speaker between –12and +12 level in 0.5 level interval .

•If “NONE” was selected for the surround back speakers setting in the SPEAKER SIZE, then this setting will not appear.

33