Marantz SR8001, SR7001 manual Clone Mode, Setting the Macro Timer, Executing the Macro Timer

Page 68
To cancel the macro timer, return to the TIMER menu and press the D5 (CANCEL) and then press D1 (M-01).
This fi nalizes the time.
The time which is set previously is displayed.
Press the D1 (M-01) direct button .
4.
5. Press the 2 and 0 numeric button to set the hour indicator to 20.
6. Press the 3 and 5 numeric button to set the minute indicator to 35.
7. Press the OK cursor button.
8. To exit, press the M button.
more.
The menu is displayed.
2. Press the > button to display the third page TIMER menu.
3. Press the D2 (ONCE?) direct button. The M-TMR menu is displayed on the LCD.
• To cancel timer operation, press CANCEL.
Hold down the M button for three seconds or
PAGE 1 2 3
PAGE 1 2 3

SETTING THE MACRO TIMER

Setting the macro timer enables the macro program to automatically turn the power for a device on or off or perform other operations.

In the settings, you can select to execute the macro timer everyday or only once.

Be sure to set the clock to the correct time before using the timer. The macro timer can only be set for one program a day.

This example shows how to use the timer only once at 20:35 to execute a macro programmed to M-01.

2

 

3

4

 

 

LEARN

LEARN

 

 

MACRO

MACRO

USE

PAGE 1 2 3

PAGE 1 2

1 2 3

5

 

6

 

LEARN

 

LEARN

 

MACRO

 

MACRO

 

1.

EXECUTING THE MACRO TIMER

The macro program starts when the time that was set is reached. The TIMER indicator lights up whenever the macro timer is activated.

Note:

•To execute the macro timer, place the remote control facing the infrared sensor of the device to be operated. If the remote control is not in a suitable position, it may not operate the device properly.

CLONE MODE

CREATING COPIES USING CLONE MODE

All of the codes programmed to the RC8001SR remote control can be copied to another RC8001SR using a few simple operations.

•The remote control can copy the entire contents or the contents for specific source buttons.

•When copying the entire contents, all programmed codes, modified names, programmed macros, and signal transmission intervals are copied.

When copying the contents for source buttons, the programmed codes and modifi ed names are copied.

Note:

•The clone function can only be used for copying when using the same model (RC8001SR) for both the transmitting and receiving remote control.

COPYING ENTIRE CONTENTS

<Transmitting remote control>

 

3

4

 

9

 

 

 

 

 

NAME

 

PAGE 1 2 3 4

 

PAGE 1 2 3 4

 

PAGE 1 2

 

 

 

 

 

 

<Receiving remote control>

 

5

6

 

9

PAGE 1 2 3 4

 

PAGE 1 2 3 4

 

1 2 3 4

 

 

 

 

 

1. Place the receiver sensor of the receiving remote control (top) so that it is facing the transmitter of the transmitting remote control (top) at a distance of about 5 cm (2 inches).

2. Hold down the M button of the transmitting remote control for three seconds or more.

The menu is displayed.

3. Press the > button to display the fourth page CLONE menu.

4. Press the D3 (TX) direct button. The transmitting side is now ready.

5. Hold down the M button of the receiving remote control for three seconds or more.

The menu is displayed.

6. Press the > button to display the fourth page CLONE menu.

7. Press the D1 (RX) direct button. The receiving side is now ready.

8. Press the OK cursor button on the receiving remote control.

9. Press the OK cursor button on the transmitting remote control.

When copying is started, the bar indicators on both LCDs start to move from the left to the right.

•When the copying operation is completed, TX OK is displayed on the LCD of the transmitting remote control, and RX OK is displayed on the LCD of the receiving remote control.

•Do not touch either of the remote controls during the copying operation. Doing so could cause copying to fail.

•If the copying fails in the middle of the copying process, RX ERROR is displayed on the receiving remote control. Check and perform steps 1 to 7 again.

•Copying takes about three minutes to complete when the transmitting remote control has been programmed to 100% capacity.

10. Once copying is completed, press the M button

ENGLISH

 

on both remote controls.

 

 

 

 

COPYING BY SOURCE

 

 

 

 

 

 

The 12 sources can be copied on a source by source

 

 

basis. You can select from up to 12 source types.

 

<Receiving remote control>

 

 

 

 

6

7

 

 

8

 

 

 

 

 

LEARN

 

 

 

 

 

 

PAGE 1 2 3 4

 

1 2 3 4

 

 

PAGE 1 2 3 4

 

 

 

 

 

 

 

 

 

 

 

 

1. Place the receiver sensor of the receiving remote control (top) so that it is facing the transmitter of the transmitting remote control (top) at a distance of about 5 cm (2 inches).

2. Hold down the M button of the transmitting remote control for three seconds or more.

The menu is displayed.

3. Press the > button to display the fourth page CLONE menu.

4. Press the D3 (TX) direct button.

The transmitting side is now ready.

5. Hold down the M button of the receiving remote control for three seconds or more.

6. Press the > button to display the fourth page CLONE menu.

7. Press the D2 (RX-S) direct button.

8. Press the source button to be copied.

The receiving side is now ready.

The name of the source which was pressed is displayed on the LCD.

•Each time the source button is pressed, the name is displayed on the LCD.

9.Press the OK cursor button on the receiving remote control.

10. Press the OK cursor button on the transmitting remote control.

When copying is started, the bar indicators on both

LCDs start to move from the left to the right.

•When the copying operation is completed, TX OK is displayed on the LCD of the transmitting remote control, and RX OK is displayed on the LCD of the receiving remote control.

•Do not touch either of the remote controls during the copying operation. Doing so could cause copying to fail.

65

Page 67 Page 69
Image 68
Page 67 Page 69
Contents Model SR7001/SR8001 User Guide Read Before Operating Equipment AC Polarized Plug NEC National Electrical CodeTable of Contents Precautions IntroductionDescription Do not Locate in the Following PlacesAbout Dolby Pro Logic THX Select2Neo6 offers several important improvements as follow English Features AccessoriesRemote Controller RC8001SR THX Select 2 certifiedPower switch and Standby indicator Headphone jack for stereo headphonesHow to Attach the Front AUX Jack Cover Input Selector knob AUDIO/ VideoFL Display and Indicater Opening and closing the front panel doorPCM SurroundRear Panel Multi Speaker / Speaker COutput 0AC Outlets@1AUDIO IN/OUT TV, DVD, VCR1, DSS/VCR2, TAPE, CD/CDR Names and Functions@3VIDEO IN/OUT TV, DVD, VCR1, DSS/VCR2 @4HDMI Input / OutputLCD Indicators Sleep sleep timer buttonDISP. button OSD buttonRemote Control Range Battery Replacement IntervalSetting the Time Safety Precautions for BatteriesGeneral Information of RC8001SR to AMP ModeTuner Mode Speaker Placement Connecting SpeakersConnecting Speaker Wire ConnectionsConnecting Audio Components Connecting a SubwooferConnecting Digital Audio Components Subwoofer to the amplifierConnecting Hdmi Devices Hdmi JackConnecting Video Components VIDEO, S-VIDEO, Component JacksThere are 3 types of video jacks on the rear panel Video jackConnecting AN External Power Amplifier Advanced ConnectingConnecting Multi Channel Audio Source Connecting the Antenna Terminals Connecting the Supplied AntennasConnecting AN FM Outdoor Antenna Connecting AN AM Outdoor AntennaHow to Subscribe See the Checking the XM Signal Strength and Radio IDXM Radio Overview Introducing XM Satellite RadioConnecting for the Multi Room Connecting for Speaker C USEBi-wire Connection Multiroom BConnecting Other Equipment DC OUT DC TriggerEmitter OUT SR8001 Only FlasherSetup Onscreen Display Menu SystemRC8001SR Button Control SR7001 Front Button ControlSurround Setup P SUB MenuInput Setup Func Input SetupCH Input Setup Func Rename7.1 CH Input Setup AutoHdmi DIGDefault Function RenameBack SpaceSpkr Speaker Setup Auto SetupManual Setup THX Audio SetupAuto Setup MultEQ Setup feature Automatically optimizes settingsTo do this, the Auto Setup feature measures a Listening positions, using the supplied microphoneTo check equalizer MultEQ parameters, see Error Messages Cause How to RemedySpeaker Distance Manual SetupSpeaker Size THX Audio Setup Speaker LevelAdvanced Speaker Array ASA Speaker type and positioningSurround Setup Channel LevelNEO6 Parameter PLIIx PRO Logic IIx Music ParameterCsiiparameter Video Setup Video ConvertPreference Multi Room Setup DC Trigger SetupAcoustic EQ Preset G. EQ ADJ ResetCheck Auto FrequencySelecting the Surround Mode Using the SR7001Using the remote control unit Example DVDConvert Using the Sleep TimerVideo Convert Surround Mode SurroundSource Direct Pure DirectEX/ES Multi CH. STCircle Surround CSII-CINEMA, CSII-MUSIC, CSII-MONO StereoSBL Analog THX Listening Through Headphones Attenuation to Analog Input SignalAuto Power on Auto Power OFFDisplay Mode Selecting Analog Audio Input or Digital Audio InputRecording AN Analog Source Audio from anotherSpeaker A/B LIP.SYNCCH Input AUX2 InputAuto Tuning Manual TuningFM Tuning Mode Auto Stereo or Mono Basic OperationPreset Memory Manual Preset Memory Recalling a Preset Station Preset ScanAuto Preset Memory Clearing Stored Preset Stations Sorting Preset StationsName Input of the Preset Station → B → C ... Z → 1 → 2 → 3 .... → → +Selecting AN Input Source Switching XM Information in the Front Panel DisplayListening to XM Satellite Radio Search Mode Preset Search ModeALL Channel Search Mode When the Artist name/Song title is displayedPreset Memory Category Search ModeUsing the SR7001 Using the remote control unit FM/AM stationsVCR DSS Multi Room Playback Using the Multi Multi Room SystemRoom OUT Terminals Speaker TerminalsGeneral TunerRemote Controller Operation Controlling Marantz ComponentsStop PauseTurns the CD recorder on Turns the CD recorder offTurns the MD deck on Turns the MD deck offUSE Mode Entering and Setting the Manufacturer Number Di- rectlyPreset Mode Setting Equipment Not Appearing in Manufacturer Number ListRewriting Names Learn ModeProgramming the Direct Buttons and Rewriting Names Erasing Buttons and Erasing Direct Buttons Erasing Direct Button PagesErasing Sources Erasing buttonsChanging Names of Macro Programs Programming MacrosErasing All Erasing Steps of Macro Programs Overwriting Steps in Macro ProgramsInserting Steps in Macro Programs Clearing Macro ProgramsClone Mode Setting the Macro TimerExecuting the Macro Timer Creating Copies Using Clone ModeAdjusting the Display Contrast SetupSetting the Macro Interval Time Troubleshooting Symptom Cause RemedyTroubleshooting Symptom Cause RemedyHdmi CppmTechnical Specifications DimensionsSetup Codes AmplifierRECEIVER/TUNER CableTape Deck CD/CD-R Player Laser DiskIii VCR Source button name TV Source button name VCRVCR DVD Source button name VCR Source button name DVDDirect Button Functions Is a registered trademark

SR7001, SR8001 specifications

The Marantz SR8001 and SR7001 are distinguished receivers in the realm of home theater audio, known for their exceptional sound quality, robust build, and user-friendly features. These models embody Marantz's commitment to delivering high-fidelity audio, making them popular choices among audiophiles and casual users alike.

The SR8001 is a flagship model, which offers an impressive 7.1 channel surround sound configuration, providing a power output of 110 watts per channel. It incorporates Marantz's renowned HDAM (Hyper Dynamic Amplification Module) technology, which contributes to higher openness in sound and lower distortion levels. This model supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that users experience cinematic sound quality right in their living rooms.

The SR8001 is equipped with a range of connectivity options, including HDMI 1.3 inputs, allowing it to seamlessly integrate with various high-definition video sources. In addition, it supports up to 1080p video upscaling via the built-in Faroudja DCDi Cinema technology, ensuring that standard-definition content can be enhanced to near-HD quality. This versatility makes it suitable for a variety of home theater setups.

On the other hand, the Marantz SR7001 is slightly more compact but still packs a powerful punch. It delivers 100 watts per channel across its 7.1 channels, containing many of the same great features found in the SR8001. It also utilizes HDAM technology to maintain sound integrity and clarity. The SR7001 supports a variety of digital audio formats, enhancing its compatibility with contemporary home media setups.

Both receivers feature a user-friendly on-screen setup menu, making it easy for users to adjust settings and calibrate their home theater systems. Additionally, Marantz engineered these models with a robust power supply and chassis construction to reduce interference and vibrations, enhancing overall audio performance.

In summary, the Marantz SR8001 and SR7001 are exemplary audio receivers that blend advanced technology with superior audio performance. Their powerful amplification, robust connectivity options, and versatile audio format support make them standout choices for those seeking to elevate their home entertainment experience.
Top Page Image Contents