Jonsered GR 2126D manual Symbol Explanation, Symbols

Page 2
Symbols

Symbols

SYMBOL EXPLANATION

15 m

15

m

50FT

50FT

WARNING! Clearing saws, brushcutters and trimmers can be dangerous!

Careless or incorrect use can result in serious or fatal injury to the operator or others.

Read through the Operator‘s Manual carefully and understand the content before using the machine.

Always use

A protective helmet where there is a risk of falling objects

Ear protection

Approved eye protection

Max. speed of output axle, rpm

This product is in accordance with applicable CE directives.

Beware of thrown objects and ricochets.

The operator of the machine shall ensure, while working, that no persons or animals come closer than 15 metres.

Machines fitted with clearing or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. The blade can cause the amputation of arms and legs. Always keep people and animals at least 15 metres from the machine.

Always wear approved protective gloves.

Use anti-slip and stable boots.

Only use non-metallic, flexible cutting elements, that is trimmer head with trimmer cord.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Checks and/or maintenance should be carried out with the engine switched off, with the stop switch in the STOP position.

Always wear approved protective gloves.

Regular cleaning required.

Ocular control.

Approved eye protection must always be used.

Arrows which show limits for handle mounting.

2 – English

Image 2
Contents Operator´s manual EPA SYMBOL EXPLANATION SymbolsCONTENTS List of contentsPersonal protective equipment SAFETY INSTRUCTIONSThe machine‘s safety equipment 1. Throttle trigger lock3. Cutting attachment guard 2. Stop switchThe stop switch should be used to stop the engine 4. Anti-vibration system8. Locking nut 6. Muffler7. Cutting equipment Control, maintenance and service of the machine‘s safety equipment Check that the guard is undamaged and not cracked Reduce the machine‘s tendency to kickback Cutting equipment “Technical data“Start General safety instructionsFuel safety Transport and storageGeneral working instructions Basic safety precautionsDesignations Basic clearing techniquesAdjusting the harness and clearing saw Clearing‘s ABC Grass clearing using a grass bladeBrush cutting using the saw blade Working methodsTrimming Grass clearing using the trimmer head and plastic bladesClearing SweepingWHAT IS WHAT? What is what on the brushcutter?Assembling the handlebars ASSEMBLYAssembly of the blade and trimmer head Assembling the blade guard and grass bladeAssembling the blade guard and clearing blade Assembling the spray guard and trimmer head Tap´n´go ProAdjusting the harness and clearing saw Assembling other guards and cutting equipmentFuelling FUEL HANDLINGFuel mixture This engine is certified to operate on unleaded gasolineStart and stop START AND STOPControl before starting Recommended max. speed See “Technical Data” MAINTENANCECarburettor Rec. idling speed 2700 rpmHigh speed needle H Final setting of the idling speed TCorrectly adjusted carburettor Angle gear MufflerCooling system Filing the grass blade Air filterSpark plug 0,5 mmDaily maintenance Maintenance scheduleSharpening the clearing blade Weekly maintenanceGR2126D TECHNICAL DATATechnical data EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS20mm Poly Trim6 Nm 15 cm Trimmy H´*xre¶5¶¨ 30 - English2,0-2,4mm Tap-N-Go Pro“Click” 080-.0952002W11 ´*xre¶5¶¨108