Jonsered GR 2126D manual Safety Instructions, Check that the guard is undamaged and not cracked

Page 8

SAFETY INSTRUCTIONS

3.Cutting attachment guard

•Check that the guard is undamaged and not cracked.

•Replace the guard if it has been exposed to impact or is cracked.

•Always use the prescribed blade an guard combination, see chapter "Technical data".

4.Vibration damping system

•Check the vibration damping element regularly for material cracks and distortion.

•Check that the vibration damping element is undamaged and securely attached.

5. Muffler

1.Never use a machine that has a defective muffler.

2.Check regularly that the muffler is secure.

3.If your muffler is fitted with a spark arrest screen then it should be cleaned regularly. A blocked screen leads to the engine overheating with serious damage as a result. Never use a muffler with a defective spark arrest screen.

8 – English

Image 8

Contents Operator´s manual EPA SYMBOL EXPLANATION SymbolsCONTENTS List of contentsSAFETY INSTRUCTIONS The machine‘s safety equipmentPersonal protective equipment 1. Throttle trigger lock2. Stop switch The stop switch should be used to stop the engine3. Cutting attachment guard 4. Anti-vibration system8. Locking nut 6. Muffler7. Cutting equipment Control, maintenance and service of the machine‘s safety equipment Check that the guard is undamaged and not cracked Reduce the machine‘s tendency to kickback Cutting equipment “Technical data“General safety instructions Fuel safetyStart Transport and storageGeneral working instructions Basic safety precautionsDesignations Basic clearing techniquesAdjusting the harness and clearing saw Grass clearing using a grass blade Brush cutting using the saw bladeClearing‘s ABC Working methodsGrass clearing using the trimmer head and plastic blades ClearingTrimming SweepingWHAT IS WHAT? What is what on the brushcutter?ASSEMBLY Assembly of the blade and trimmer headAssembling the handlebars Assembling the blade guard and grass bladeAssembling the blade guard and clearing blade Assembling the spray guard and trimmer head Tap´n´go ProAdjusting the harness and clearing saw Assembling other guards and cutting equipmentFUEL HANDLING Fuel mixtureFuelling This engine is certified to operate on unleaded gasolineStart and stop START AND STOPControl before starting MAINTENANCE CarburettorRecommended max. speed See “Technical Data” Rec. idling speed 2700 rpmHigh speed needle H Final setting of the idling speed TCorrectly adjusted carburettor Angle gear MufflerCooling system Air filter Spark plugFiling the grass blade 0,5 mmMaintenance schedule Sharpening the clearing bladeDaily maintenance Weekly maintenanceGR2126D TECHNICAL DATATechnical data EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS20mm Poly Trim6 Nm Trimmy H ´*xre¶5¶¨15 cm 30 - EnglishTap-N-Go Pro “Click”2,0-2,4mm 080-.0952002W11 ´*xre¶5¶¨108