Jonsered CS2163, CS 2171, CS 2165 manual Min m, 10 ft

Page 18

SAFETY INSTRUCTIONS

GENERAL SAFETY PRECAUTIONS

1Chain saws are designed solely for cutting wood. The only cutting equipment that can be used with this chain saw are the combinations of bars and chains recommended in the ”Technical data” section.

2 Never use a chain saw if

you are tired, if you have

drunk alcohol, or if you

are taking medication that

7FUEL SAFETY

(Refuelling, fuel mixture, storage.)

Fuel and fuel vapour are highly inflammable. Take care when handling fuel and chain oil. Keep away from naked flames and do not breathe in fuel vapour.

affects your vision, your

judgement or your co-

ordination.

3Always wear suitable protective clothing. See the section on ”Personal protective equipment”.

4Never use a chain saw that has been modified in any way from its original specification.

5Never use a chain saw that is faulty. Carry out the regular checks, maintenance and service routines described in this manual. Some maintenance and service measures must be carried out by trained specialists. See the section on ”Maintenance”.

6STARTING

•Never start a chain saw

unless the bar, chain and all covers are fitted correctly. (See the section on ”Assembly”).

•Never try to refuel the saw while it is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (2-stroke mixture).

•Move the saw at least 3 m from the refuelling point before starting it.

•Never start the chainsaw:

a)If you have spilt fuel or chain oil on the saw. Wipe off the spill and allow remaining fuel to evaporate.

b)If you spill fuel or chain oil on yourself or your clothes. Change your clothes.

c)If there is a fuel leak. Check regularly for leaks from the FUEL CAP and FUEL LINES.

Min. 3 m

(10 ft)

• Never start a chain saw indoors. Exhaust fumes can be dangerous.

•Before starting the saw

make sure there are no people or animals nearby who might be put at risk.

•The chain brake should be

activated when starting (see instructions under the heading Start and stop). Do not drop start. This method is very dangerous because you may lose control of the saw (see instructions under the heading Start and stop).

•Place the saw on the

ground and hold the rear handle down with your right foot. Grasp the front handle firmly using your left hand. Make sure the chain saw is steady and the chain is not touching the ground. Then grasp the starter handle with your right hand and pull the starter cord. Never wrap the starter cord around your hand.

•Always store the chain saw and fuel away from any sources of sparks or naked flames, e.g. machines, electric motors, relays, switches, boilers, etc.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

8Never use any accessories other than those recommended in this manual. See the sections on ”Cutting equipment” and ”Technical data”.

The risk of accident is increased if you use the wrong cutting equipment or a chain that is not sharpened correctly. Using the wrong combi- nation of bar and chain can increase the risk of accidents!

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents EPA KEY to Symbols SymbolsContents EPASafety Instructions Personal Protective EquipmentChain brake and front hand guard 3a StartingThrottle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the inertia brake release Checking brake band wearChecking the front hand guard Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesSaw chain Cutting equipment designed to minimise kickbackBar Some terms that describe the bar and chainSharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Risk of kickback is increased with a badly sharpened chainGeneral advice on setting raker clearance Setting the raker clearanceTensioning the chain Filling with chain oil Lubricating cutting equipmentChain oil Never use waste oilLubricating the bar tip sprocket Checking chain lubrication Needle bearing maintenanceChecking wear on cutting equipment Chain drive sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handlesNever use the saw one- handed Min m 10 ftBasic safety rules General Working InstructionsTerms Basic cutting techniqueGeneral CuttingLimbing Tree felling techniqueSafe distance Felling directionClearing the trunk and preparing your retreat FellingCutting the trunk into logs General adviceFreeing a tree that has fallen badly = high accident risk Freeing a Trapped treeWhat is WHAT? What is what?Assembly Mounting guide bar and chainFuel Handling FuelmixChain oil Fuelling Min 3 m10ft Start Start and StopStart and stop StopMaintenance CarburetorChanging a broken or worn starter cord Starter device assemblyStarter device Tensioning the recoil springAir filter Needle bearing maintenanceAdjustment of the oil pump MufflerHeated handles CS 2163 W/CS 2171 W Centrifugal cleaning TurboCooling system Winter useWeekly maintenance Daily maintenance Monthly maintenanceTechnical Data Emission Control Warranty Statement + 46 36 14 65 00. Warranty Period+ 46 36 14 65 108 88 2002W39

CS 2165, CS 2171, CS2163 specifications

The Jonsered CS2163, CS2171, and CS2165 are a trio of powerful chain saws designed for professionals and serious enthusiasts alike. These models are particularly noteworthy for their blend of performance, durability, and user-friendly features, making them suitable for a wide range of cutting tasks.

The Jonsered CS2163 is equipped with a robust 3.1 kW engine, providing ample power for various cutting jobs, from felling trees to limbing and even cutting firewood. One of its notable features is the Quick-Release Air Filter, which allows for easy access and maintenance, ensuring optimal engine performance. Additionally, the CS2163 incorporates the Smart Start technology that reduces the resistance in the starter cord, allowing users to start the saw with minimal effort.

The CS2171, on the other hand, is a more advanced model designed for heavy-duty applications. This saw comes with a 3.4 kW engine and boasts a larger cutting capacity, making it perfect for professional users who tackle more demanding tasks. Its X-Torq engine design significantly lowers fuel consumption and emissions, aligning with environmental standards while delivering exceptional power. The CS2171 also features an anti-vibration system that enhances user comfort during extended cutting sessions, therefore maximizing productivity without sacrificing ease of use.

The CS2165 occupies a sweet spot between the CS2163 and CS2171, offering a balance of power and efficiency. Powered by a 3.2 kW engine, it provides ample performance for most tasks while still being lightweight for easy maneuverability. This model includes the same Quick-Release Air Filter found in the CS2163, making maintenance a breeze. The CS2165 also features an adjustable oil pump, allowing users to customize the oil flow to the chain based on their specific cutting needs, enhancing the longevity of both the saw and the chain.

All three models prioritize user safety, featuring a chain brake system that quickly halts the chain in case of kickback. Furthermore, the ergonomic design of the handles offers a comfortable grip, reducing fatigue during longer cutting sessions.

In summary, the Jonsered CS2163, CS2171, and CS2165 are exceptional chainsaws that cater to the needs of professionals and enthusiasts alike, combining power, technology, and ease of use in one reliable package. Their innovative features, efficient engines, and focus on user comfort make them an excellent choice for anyone in need of a high-performance chainsaw.
Top Page Image Contents