Display

(3)

(4)

(5)

(8)

(9)

(12)

(2)

(1)

(6)

(7)

(10)(11)

ENGLISH

(1) Main Information Display

This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of the unit’s operation.

(2) ENCODED SIGNAL indicators

2DIGITAL, 2SURROUND, dts and PCM

When the selected input is a digital source, one of these indicators will light to display the specific type of signal in use.

(3) Analog Input Indicator

This indicator lights when an analog input source has been selected.

(4) TUNER’s indicators

STEREO :

This indicator illuminates when an FM station is being tuned in stereo.

AUTO :

This indicator illuminates when the tuner’s Auto mode is in use.

TUNED :

This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality.

(5) Multiroom Indicator

This indicator lights when the multiroom system is active.

(6) Sleep Indicator

This indicator lights when the Sleep function is in use.

(7) Copy Indicators

This indicator lights when VCR1 COPY. TAPE, COPY, or DIGITAL COPY system is active.

(8) Night Mode Indicator

This indicator lights when the SR-19EX is in the Night mode, which reduces the dynamic range of digital program material at low volume levels.

(9) PEAK indicator

This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will light. If this happens, you should press the ATT button.

(10) Attenuation indicator

This indicator lights when the attenuation function is active.

(11) Display Off indicator

This indicator lights when the SR-19EX is in the display off mode.

(12) ENCODED CHANNEL STATUS indicators

These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “LS”, “RS” and “LFE” will light up.If the digital input signal is 2 channel PCM-audio, “L” and “R” will be displayed. If Dolby Digital 5.1ch signal with Surround EX flag comes in, “L”, “C”, “R”, “LS”, “S” , “RS” and “LFE” will show.