13 Three Component-video inputs
DVD,VCR1,DSS :
Connect the Y/Cr/Cb component video outputs of each your video product to these jacks.
14 Component Video Outputs
Connect these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the three Component Video Inputs is selected the signal will be sent to these jacks.
15 Multiroom Outputs (Audio L&R, Video)
Connect these jacks to the optional audio power amplifiers or video display devices to view and listen to the source selected by the mulitroom system in a remote room.
16 Main Amplifier Inputs:
When the jumper pins that link the Preamp Outputs with these inputs are removed, these jacks may be used to connect an external source to the internal amplifiers.
Front L/R and (Front L/R) are connected internally. If you desire to use internal the 2ch amplifiers of the front L/R channels for the surround back L & R channel, you may remove the jumper pins for front L/R channels, and then connect between (Front L) and preoutput of Surr Back L channel, (Front R) and preoutput of Surr Back R channel.
An external 2channel amplifier may be connected to the preoutput of the Front L&R channels.
(See page iii.)
17 Preamp Outputs( L,R,SL,SR,SBL,SBR,C )
When the jumper pins that link the Amplifier Inputs with these outputs are removed, these jacks may be connected to an external power amplifier.
18 Subwoofer Output
Connect this jack to the line level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. If you are using two subwoofers, either powered or with a 2 channel subwoofer amplifier, connect a “Y” connector to the subwoofer output jack and run one cable from it to each subwoofer amplifier.
19 Six Digital Inputs ( Dig. 1 – 6)
Dig.1,2,3 (Optical), Dig.4,5,6(Coaxial):
Connect the digital output from a DVD player, HDTV receiver, LD player or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source.
20 Digital Audio Outputs (Optical, Coaxial)
Connect these jacks to the matching digital input connector on a digital recorder such as a
21 Speaker outputs terminals
Front L, Front R, Surround L, Surround R and Center:
Connect the these jacks to the matching + or – terminals on your speakers. When making speaker connections, always make certain to maintain correct polarity by connecting the red (+) terminals on the
22 Remote control In/Out terminals
INPUT: This connection permits the IR sensor in the receiver to serve other remote controlled devices.
Connect this jack to the “IR IN
OUTPUT: If the
23 MULTI ROOM Remote In/Out terminals
IN: Connect to
OUT: Connect to the Marantz component equipped with remote control
24 AC OUTLETS
Connect the AC power cables of components such as a DVD and CD player to these outlets. Both SWITCHED and UNSWITCHED outlets are provided. The one marked SWITCHED provides power only when the
The one marked UNSWITCHED is always live as long as the
A component connected here may be left on permanently, or may be switched off with its own power switch.
Caution:
•In order to avoid potential
25 AC INLET
Connect the provided detachable power cord, and connect the AC plug to an unswitched AC wall output.
ENGLISH
11