IPSO T30, T45 installation manual Pre-Installation Inspection

Page 11

Installation

Pre-Installation Inspection

Upon delivery, visually inspect the crate, carton and parts for any visible shipping damage. If the crate, carton, or cover is damaged or signs of possible damage are evident, have the carrier note the condition on the shipping papers before the shipping receipt is signed, or advise the carrier of the condition as soon as it is discovered.

Remove the crate and protective cover as soon as possible and check the items listed on the packing list. Advise the carrier of any damaged or missing articles as soon as possible. A written claim should be filed with the carrier immediately if articles are damaged or missing.

Tumblers – T30 and T45

IMPORTANT: Warranty is void unless tumbler is installed according to instructions in this manual. Installation should comply with minimum specifications and requirements detailed herein, and with applicable local gas fitting regulations, municipal building codes, water supply regulations, electrical wiring regulations, and any other relevant statutory regulations. Due to varied requirements, applicable local codes should be thoroughly understood and all pre-installation work arranged for accordingly.

4-08-43

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

10

Image 11
Contents On-Premise Laundry Planning Handbook Contents Model Identification IntroductionConversion Table Multiply To Obtain Tumblers T30 and T45Inches mm Steam Coil Rating at 100 psig Boiler Horsepower Btu/hrPounds kg Cylinder SizeModels T30 Cabinet DimensionsModels Rear Exhaust Exhaust Outlet LocationsModels Gas Connection Gas Connection LocationsElectrical Connection Locations Lower Steam Connection LocationsModels Inlet Outlet T30 UpperPre-Installation Inspection InstallationW056R1 TMB2110N Venting Exhaust RequirementsLayout Make-Up AirDuct Equivalent Length of Rigid Diameter Straight Duct Individual VentingManifold Venting T438I Mm Duct Duct T30 T45TWO Manifold Assemblies Duct T30 T45 Station Mm DuctElectrical Requirements for Gas and Steam Models Connections Amps Or Breaker Rating Poles Conductor Size Terminal Block Recommended FuseCurrent MinimumAmps Poles Conductor Size Required Electrical Requirements for Electric ModelsTerminal Block Recommended Current Breaker Minimum Connections