Remote Control (continued)
English
Using the remote control
A Open the battery compartment.
B Insert two batteries type R03 or AAA, following the indications
C Close the cover.
D Point the remote control directly at the remote sensor (iR) on the front panel.
CAUTION!
–Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
–Do not mix batteries (old and new or carbon and alkaline, etc.).
–Batteries contain chemical substances, so they should be disposed of properly.
E Select the source you wish to control by pressing the DISC, TUNER button on the remote control.
F Then select the desired function (for example m, M).
12