Magnavox MRD100 user manual Problem Playback Solution

		Troubleshooting (continued)
Problem (Playback)		Solution
The remote control does not	–	Select the source you want to play (for example,
function properly.		DISC or TUNER) beforepressing the function button
		( , m / M).
	–	Reduce the distance between the remote control and
		the system.
	–	Replace the batteries with new ones.
	– Point the remote control directly toward the IR sensor.
	–	Check that the batteries are loaded correctly.
The DVD system does not	–	Insert a readable disc with the playback side facing
start playback.		down. The DVD+R/CD-R must be finalized.
	–	Check the disc type, color system (PAL or NTSC)
		and region code.
	–	Check for any scratches or smudges on the disc.
	–	Press SETUP to turn off the system setup menu screen.
	–	You may need to enter the password in order to
		unlock the disc for playback.
	–	Moisture may have condensed inside the system.
		Remove the disc and leave the system turned on for
		about an hour.

English

The aspect ratio of the screen cannot be changed even though you have set the TV display.

Cannot activate some features such as Angles, Subtitles, or multi-language Audio.

Not able to select some items in the setup/system menu.

–The aspect ratio is fixed on the DVD disc.

–Depending on the TV, it may not be possible to change the aspect ratio.

–The features may not be available on the DVD.

–Changing the language for the sound or subtitle is prohibited on this DVD.

–Press STOP button twice before selecting the system setup menu.

–Depending on the disc availability, some menu items cannot be selected.

Radio reception is poor. – If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

–Increase the distance between the system and your TV or VCR.

–Tune in to the correct frequency.

–Place the antenna further away from any equipment that may be causing the interference.

The DVD system does not – Disconnect the power cord from the power outlet

work.for a few minutes. Reconnect the power cord and try to operate again as usual.

41