Magnavox MRD100 user manual Troubleshooting, Problem General Solution

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these instructions, consult your dealer for help.

Problem (General)		Solution
No power.	–	Check if the AC power cord is properly connected.
	–	Press the 2 (STANDBY ON) to turn on the power.
No picture.	–	Refer to your TV’s manual for correct Video In
		channel selection. Change the TV channel until you
		see the DVD screen.
	–	Press the DISC button to select disc mode.
	–	If this happens when you are turning on the
		progressive scan feature, wait for 15 seconds for the
		auto recovery.
Completely distorted picture	–	If this happens when you are changing the setting of
or black/white picture.		the ‘TV SYSTEM’, wait for 15 seconds for the auto
		recovery.
	–	Check the video connection.
	–	Sometimes a small amount of picture distortion may
		appear. This is not a malfunction.
	–	Clean the disc.
No sound or distorted sound.	–	Adjust the volume.
	–	Check the speaker connections and settings.
	–	Make sure that the audio cables are connected and
		press the SOURCE button to select the correct input
		source (for example, TUNER or TV/AUX/DI) to
		choose the device that you want to hear through the
		DVD system.
	–	When playback of DTS track, press AUDIO to select
		other audio track.
There is no sound from the	–	Make sure that the center and rear speakers are
center and rear speakers.		connected correctly.
	–	Press the SURROUND button to select a correct
		surround sound setting.
	–	Make sure that the source you are playing is recorded
		or broadcast in surround sound (Dolby Digital, etc.).

40