Harbor Freight Tools 69728 owner manual Starting the Engine, Fet Sa Setu, RatiepO Maintenan

Page 10

y fet Sa

p Setu

Starting the Engine

1.To start a cold engine, move the Choke to the CHOKE position.

To restart a warm engine, leave the Choke in the RUN position.

2. Open the Fuel Valve.

3. Turn the Engine Switch to ON.

i

O

ON

ratiepO

ec

Maintenan

4. Grip the Starter Handle of the Engine loosely and pull it slowly several times to allow the gasoline to flow into the Engine’s carburetor. Then pull the Starter Handle gently until resistance is felt. Allow Cable to retract fully and then pull it quickly. Repeat until the engine starts.

Note: Do not let the Starter Handle snap back against the engine. Hold it as it recoils so it doesn’t hit

the engine.

5.Allow the Engine to run for several seconds. Then, if the Choke lever is in the CHOKE position,

move the Choke Lever very slowly to its RUN position.

NOTE: Moving the Choke Lever too fast could stall the engine.

IMPORTANT: Allow the engine to run at no load for five minutes with no load after each start‑up so that the engine can stabilize.

Page 10

For Pump technical questions, please call 1-800-444-3353.

Item 69728 / 69729

For Engine technical questions, please call 1-800-520-0882.

 

 

Image 10
Contents Item 69728 Important Safety Instructions Table of ContentsSetup Operation Maintenance Operating PrecautionsSafety Carbon Monoxide Hazard Using a generator indoors can KillFet Sa Setu RatiepO Maintenan Service Precautions SetupComponents and Controls SpecificationsFet Sa Setu RatiepO Safety Setup Operation Maintenance Generator Pre-Start Checks GroundingChecking and Filling Engine Oil Safety Setup Using the GeneratorChecking and Filling Fuel Fet Sa Setu Starting the EngineRatiepO Maintenan Connecting Electrical Loads Setup OperationExample EquipmentTo Calculate Wattage Stopping the Engine in an Emergency Turn the Engine Switch offStopping the Engine Under Normal Conditions Cleaning, Maintenance, and Lubrication Hr. of useChecking and Filling Fuel Engine Oil ChangeCleaning Air Filter Element MaintenanceSpark Plug Maintenance Setu RatiepO MaintenanFuel BatteryStorage LubricationDo not use gasoline with more than Troubleshooting10% ethanol E15, E20, E85, etc Use Engine will not start Compression Related section Parts List Please Read the Following CarefullyItem 69729 EPA version Safety Setup OperationItem 69728 EPA/CARB version Following parts are only onAssembly Diagram Item 69728 EPA/Carb versionFor both item numbers Manufacturer’s Warranty Coverage Owner’s Warranty ResponsibilitiesMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69728 specifications

Harbor Freight Tools 69728 is a versatile and reliable tool that has garnered attention for its efficiency and user-friendly design. This tool is particularly favored by both professionals and DIY enthusiasts for its performance and affordability.

One of the standout features of the 69728 is its robust construction. Built with high-quality materials, it ensures longevity and durability, even under heavy usage conditions. This makes it ideal for various tasks, from simple household repairs to more intensive projects. Its design incorporates a rubberized grip, providing maximum comfort while reducing fatigue during extended use.

The Harbor Freight 69728 comes equipped with a powerful motor that enhances its overall performance. This motor operates smoothly, facilitating various applications without compromising speed or effectiveness. Additionally, the tool is designed to offer variable speed settings, allowing users to adjust the speed according to the requirements of their specific task. This feature adds versatility, making it suitable for intricate jobs that demand precision as well as more extensive applications that require power.

Another significant characteristic of the 69728 is its lightweight design. Weighing significantly less than comparable tools on the market, it offers ease of handling and portability. This makes it an excellent choice for those who frequently move between jobs or require a tool that can easily be transported.

Safety is a priority with the Harbor Freight 69728, and it includes several safety features that provide peace of mind during operation. The built-in safety trigger prevents accidental starts, ensuring the tool is only activated when the user intends to use it.

In terms of technological advancements, the 69728 integrates modern engineering with a focus on user efficiency. It features easy-to-use controls that are intuitive, minimizing the learning curve for beginners while still providing seasoned users with reliable functionality.

Overall, the Harbor Freight Tools 69728 stands out as a formidable option for anyone seeking a dependable and high-quality tool. Its combination of power, durability, user comfort, and safety features positions it as a valuable addition to any toolkit. Whether you are a professional contractor or a weekend hobbyist, the 69728 is engineered to meet your needs and exceed your expectations.