Harbor Freight Tools 69728 owner manual Checking and Filling Fuel, Engine Oil Change

Page 15

Checking and Filling Fuel

WARNING! To prevent serious injury from fire:

Fill the fuel tank in a well-ventilated area away from ignition sources. If the engine is hot from use, shut the engine off and wait for it to cool before adding fuel.

Do not smoke.

1.Clean the Fuel Cap and the area around it.

2.Unscrew and remove the Fuel Cap.

3.If needed, fill the Fuel Tank with 87 octane or higher unleaded gasoline.

Note: Do not use gasoline containing more than 10% ethanol (E10). Do not use E85 ethanol.

Note: Do not use gasoline that has been stored in a metal fuel container or a dirty fuel container. It can cause particles to enter the carburetor, effecting engine performance and/or causing damage.

4.Replace the Fuel Cap.

5.Wipe up any spilled fuel and allow excess to evaporate before starting engine. To prevent FIRE, do not start the engine while the smell of fuel hangs in the air.

Safety

Engine Oil Change

CAUTION! Oil is very hot during operation and can cause burns. Wait for engine to cool before changing oil.

1.

Make sure the engine is stopped and is level.

2.

Close the Fuel Valve.

3.

Place a drain pan (not included) underneath

Full level

Full level

Setup

 

the crankcase’s drain plug.

4.

Remove the drain plug and, if possible,

 

tilt the crankcase slightly to help drain

 

the oil out. Recycle used oil.

5.

Replace the drain plug and tighten it.

6.

Clean the top of the Dipstick and the area around it.

 

Remove the Dipstick by threading it counterclockwise,

 

and wipe it off with a clean lint free rag.

7.Add the appropriate type of oil until the oil level is at the full level. SAE 10W‑30 oil is recommended for general use.

Note: Do not thread the dipstick in when checking the oil level.

The SAE Viscosity Grade chart shows other viscosities to use in different average temperatures.

SAE Viscosity Grades

30

Operation

10W-30

5W-30

-20 0 20 40 60 80 100°F

Average outdoor temperature

8. Thread the dipstick back in clockwise.

CAUTION! Do not run the engine with too little oil. The engine will be permanently damaged.

Maintenance

Item 69728 / 69729

For Pump technical questions, please call 1-800-444-3353.

Page 15

For Engine technical questions, please call 1-800-520-0882.

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Item 69728 Table of Contents Important Safety InstructionsCarbon Monoxide Hazard Using a generator indoors can Kill Operating PrecautionsSafety Setup Operation MaintenanceFet Sa Setu RatiepO Maintenan Setup Service PrecautionsSpecifications Components and ControlsFet Sa Setu RatiepO Safety Setup Operation Maintenance Grounding Generator Pre-Start ChecksChecking and Filling Engine Oil Using the Generator Safety SetupChecking and Filling Fuel Starting the Engine Fet Sa SetuRatiepO Maintenan Setup Operation Connecting Electrical LoadsEquipment ExampleTo Calculate Wattage Turn the Engine Switch off Stopping the Engine in an EmergencyStopping the Engine Under Normal Conditions Hr. of use Cleaning, Maintenance, and LubricationEngine Oil Change Checking and Filling FuelSetu RatiepO Maintenan Air Filter Element MaintenanceSpark Plug Maintenance CleaningLubrication BatteryStorage FuelTroubleshooting Do not use gasoline with more than10% ethanol E15, E20, E85, etc Use Engine will not start Compression Related section Please Read the Following Carefully Parts ListFollowing parts are only on Safety Setup OperationItem 69728 EPA/CARB version Item 69729 EPA versionItem 69728 EPA/Carb version Assembly DiagramOwner’s Warranty Responsibilities For both item numbers Manufacturer’s Warranty CoverageMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69728 specifications

Harbor Freight Tools 69728 is a versatile and reliable tool that has garnered attention for its efficiency and user-friendly design. This tool is particularly favored by both professionals and DIY enthusiasts for its performance and affordability.

One of the standout features of the 69728 is its robust construction. Built with high-quality materials, it ensures longevity and durability, even under heavy usage conditions. This makes it ideal for various tasks, from simple household repairs to more intensive projects. Its design incorporates a rubberized grip, providing maximum comfort while reducing fatigue during extended use.

The Harbor Freight 69728 comes equipped with a powerful motor that enhances its overall performance. This motor operates smoothly, facilitating various applications without compromising speed or effectiveness. Additionally, the tool is designed to offer variable speed settings, allowing users to adjust the speed according to the requirements of their specific task. This feature adds versatility, making it suitable for intricate jobs that demand precision as well as more extensive applications that require power.

Another significant characteristic of the 69728 is its lightweight design. Weighing significantly less than comparable tools on the market, it offers ease of handling and portability. This makes it an excellent choice for those who frequently move between jobs or require a tool that can easily be transported.

Safety is a priority with the Harbor Freight 69728, and it includes several safety features that provide peace of mind during operation. The built-in safety trigger prevents accidental starts, ensuring the tool is only activated when the user intends to use it.

In terms of technological advancements, the 69728 integrates modern engineering with a focus on user efficiency. It features easy-to-use controls that are intuitive, minimizing the learning curve for beginners while still providing seasoned users with reliable functionality.

Overall, the Harbor Freight Tools 69728 stands out as a formidable option for anyone seeking a dependable and high-quality tool. Its combination of power, durability, user comfort, and safety features positions it as a valuable addition to any toolkit. Whether you are a professional contractor or a weekend hobbyist, the 69728 is engineered to meet your needs and exceed your expectations.
Top Page Image Contents