Harbor Freight Tools Essential Repair & Maintenance Practices for Harbor Freight Generators
Page 5

Service Precautions

1.Before service, maintenance, or cleaning:

a.Unplug all devices from the generator.

b.Turn the engine switch to its “OFF” position.

c.Allow the engine to completely cool.

d.Then, remove the spark plug cap from the spark plug.

2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechanical guards,

and heat shields, among other guards.

7.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly.

8.Store equipment out of the reach of children.

9.Follow scheduled engine and equipment maintenance.

Safety

3.Keep all electrical equipment clean and dry. Replace any wiring where the insulation is cracked, cut, abraded, or otherwise degraded. Replace terminals that are worn, discolored, or corroded. Keep terminals clean and tight.

4.Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or distributor. Only a qualified service technician may adjust parts that may increase or decrease governed engine speed.

5.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during service.

6.Maintain labels and nameplates on the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Refueling:

1.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.

2.Do not refill the fuel tank while the engine is running or hot.

3.To prevent fuel leakage and fire hazard, Do not overfill with fuel. Fill with fuel according to the Fuel Level information below the Specification chart for your model.

4.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

5.Refuel in a well-ventilated area only.

6.Wipe up any spilled fuel and allow excess to evaporate before starting engine. To prevent fire, do not start the engine while the smell of fuel hangs in the air.

Setup

Save these instructions.

Operation

Maintenance

Item 69728 / 69729

For Pump technical questions, please call 1-800-444-3353.

Page 5

For Engine technical questions, please call 1-800-520-0882.

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Item 69728 Table of Contents Important Safety InstructionsSafety Operating PrecautionsSetup Operation Maintenance Carbon Monoxide Hazard Using a generator indoors can KillFet Sa Setu RatiepO Maintenan Setup Service PrecautionsFet Sa Setu RatiepO SpecificationsComponents and Controls Safety Setup Operation Maintenance Checking and Filling Engine Oil GroundingGenerator Pre-Start Checks Checking and Filling Fuel Using the GeneratorSafety Setup RatiepO Maintenan Starting the EngineFet Sa Setu Setup Operation Connecting Electrical LoadsTo Calculate Wattage EquipmentExample Stopping the Engine Under Normal Conditions Turn the Engine Switch offStopping the Engine in an Emergency Hr. of use Cleaning, Maintenance, and LubricationEngine Oil Change Checking and Filling FuelSpark Plug Maintenance Air Filter Element MaintenanceCleaning Setu RatiepO MaintenanStorage BatteryFuel Lubrication10% ethanol E15, E20, E85, etc TroubleshootingDo not use gasoline with more than Use Engine will not start Compression Related section Please Read the Following Carefully Parts ListItem 69728 EPA/CARB version Safety Setup OperationItem 69729 EPA version Following parts are only onItem 69728 EPA/Carb version Assembly DiagramOwner’s Warranty Responsibilities For both item numbers Manufacturer’s Warranty CoverageMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69728 specifications

Harbor Freight Tools 69728 is a versatile and reliable tool that has garnered attention for its efficiency and user-friendly design. This tool is particularly favored by both professionals and DIY enthusiasts for its performance and affordability.

One of the standout features of the 69728 is its robust construction. Built with high-quality materials, it ensures longevity and durability, even under heavy usage conditions. This makes it ideal for various tasks, from simple household repairs to more intensive projects. Its design incorporates a rubberized grip, providing maximum comfort while reducing fatigue during extended use.

The Harbor Freight 69728 comes equipped with a powerful motor that enhances its overall performance. This motor operates smoothly, facilitating various applications without compromising speed or effectiveness. Additionally, the tool is designed to offer variable speed settings, allowing users to adjust the speed according to the requirements of their specific task. This feature adds versatility, making it suitable for intricate jobs that demand precision as well as more extensive applications that require power.

Another significant characteristic of the 69728 is its lightweight design. Weighing significantly less than comparable tools on the market, it offers ease of handling and portability. This makes it an excellent choice for those who frequently move between jobs or require a tool that can easily be transported.

Safety is a priority with the Harbor Freight 69728, and it includes several safety features that provide peace of mind during operation. The built-in safety trigger prevents accidental starts, ensuring the tool is only activated when the user intends to use it.

In terms of technological advancements, the 69728 integrates modern engineering with a focus on user efficiency. It features easy-to-use controls that are intuitive, minimizing the learning curve for beginners while still providing seasoned users with reliable functionality.

Overall, the Harbor Freight Tools 69728 stands out as a formidable option for anyone seeking a dependable and high-quality tool. Its combination of power, durability, user comfort, and safety features positions it as a valuable addition to any toolkit. Whether you are a professional contractor or a weekend hobbyist, the 69728 is engineered to meet your needs and exceed your expectations.
Top Page Image Contents