Harbor Freight Tools 69728 owner manual Fuel, Lubrication, Battery, After Storage

Page 17

Storage

When the equipment is to remain idle for longer than

20 days, prepare the engine for storage as follows:

1.CLEANING:

Wait for engine to cool, then clean engine with dry cloth. NOTICE: Do not clean using water. The water will gradually enter the engine and cause rust damage.

Apply a thin coat of rust preventive oil to all metal parts.

2.FUEL:

WARNING! To prevent serious injury from fire:

Drain the fuel tank in a well-ventilated area away from ignition sources. If the engine is hot from use, shut the engine off and wait for it to cool before draining fuel.

Do not smoke.

Air Filter Assembly

Cylinder

Assembly

Drain Plug

a.Place a funnel leading to a proper gasoline container below the carburetor.

b.Remove the drain bolt from the bottom of the carburetor bowl and allow the fuel to drain.

If present on your model, remove the small sediment cup next to the bowl and allow the fuel to drain from there as well.

c.Open the fuel valve. After all fuel has drained, reinstall the drain bolt and sediment cup (if equipped). Tighten securely.

3.Lubrication:

a.Change engine oil.

b.Clean out area around spark plug. Remove spark plug and pour one tablespoon of engine oil into cylinder through spark plug hole.

c.Replace spark plug, but leave spark plug cap disconnected.

d.Pull Starter Handle to distribute oil in cylinder. Stop after one or two revolutions when you feel the piston start the compression stroke (when you start to feel resistance).

4.Battery:

Disconnect battery cables (if equipped). Recharge batteries monthly while in storage.

5.STORAGE AREA:

Cover and store in a dry, level, well-ventilated area out of reach of children. Storage area should also be away from ignition sources, such as water heaters, clothes dryers, and furnaces.

6.After Storage:

Before starting the engine after storage, keep in mind that untreated gasoline will deteriorate quickly. Drain the fuel tank and change to fresh fuel

if untreated gasoline has been sitting for

amonth, if treated gasoline has been sitting beyond the fuel stabilizer’s recommended time period, or if the engine does not start.

Safety

Setup

Operation

Maintenance

Item 69728 / 69729

For Pump technical questions, please call 1-800-444-3353.

Page 17

For Engine technical questions, please call 1-800-520-0882.

 

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Item 69728 Table of Contents Important Safety InstructionsSafety Operating PrecautionsSetup Operation Maintenance Carbon Monoxide Hazard Using a generator indoors can KillFet Sa Setu RatiepO Maintenan Setup Service PrecautionsFet Sa Setu RatiepO SpecificationsComponents and Controls Safety Setup Operation Maintenance Checking and Filling Engine Oil GroundingGenerator Pre-Start Checks Checking and Filling Fuel Using the GeneratorSafety Setup RatiepO Maintenan Starting the EngineFet Sa Setu Setup Operation Connecting Electrical LoadsTo Calculate Wattage EquipmentExample Stopping the Engine Under Normal Conditions Turn the Engine Switch offStopping the Engine in an Emergency Hr. of use Cleaning, Maintenance, and LubricationEngine Oil Change Checking and Filling FuelSpark Plug Maintenance Air Filter Element MaintenanceCleaning Setu RatiepO MaintenanStorage BatteryFuel Lubrication10% ethanol E15, E20, E85, etc TroubleshootingDo not use gasoline with more than Use Engine will not start Compression Related section Please Read the Following Carefully Parts ListItem 69728 EPA/CARB version Safety Setup OperationItem 69729 EPA version Following parts are only onItem 69728 EPA/Carb version Assembly DiagramOwner’s Warranty Responsibilities For both item numbers Manufacturer’s Warranty CoverageMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69728 specifications

Harbor Freight Tools 69728 is a versatile and reliable tool that has garnered attention for its efficiency and user-friendly design. This tool is particularly favored by both professionals and DIY enthusiasts for its performance and affordability.

One of the standout features of the 69728 is its robust construction. Built with high-quality materials, it ensures longevity and durability, even under heavy usage conditions. This makes it ideal for various tasks, from simple household repairs to more intensive projects. Its design incorporates a rubberized grip, providing maximum comfort while reducing fatigue during extended use.

The Harbor Freight 69728 comes equipped with a powerful motor that enhances its overall performance. This motor operates smoothly, facilitating various applications without compromising speed or effectiveness. Additionally, the tool is designed to offer variable speed settings, allowing users to adjust the speed according to the requirements of their specific task. This feature adds versatility, making it suitable for intricate jobs that demand precision as well as more extensive applications that require power.

Another significant characteristic of the 69728 is its lightweight design. Weighing significantly less than comparable tools on the market, it offers ease of handling and portability. This makes it an excellent choice for those who frequently move between jobs or require a tool that can easily be transported.

Safety is a priority with the Harbor Freight 69728, and it includes several safety features that provide peace of mind during operation. The built-in safety trigger prevents accidental starts, ensuring the tool is only activated when the user intends to use it.

In terms of technological advancements, the 69728 integrates modern engineering with a focus on user efficiency. It features easy-to-use controls that are intuitive, minimizing the learning curve for beginners while still providing seasoned users with reliable functionality.

Overall, the Harbor Freight Tools 69728 stands out as a formidable option for anyone seeking a dependable and high-quality tool. Its combination of power, durability, user comfort, and safety features positions it as a valuable addition to any toolkit. Whether you are a professional contractor or a weekend hobbyist, the 69728 is engineered to meet your needs and exceed your expectations.
Top Page Image Contents