Harbor Freight Tools 69728 owner manual Fet Sa Setu RatiepO Maintenan

Page 4

Operating Precautions (cont.)

y fet Sa

p Setu

ratiepO

ec

Maintenan

16.Connect the Generator only to a load or electrical system (120 volt or 240 volt) that is compatible with the electrical characteristics and rated capacities of the Generator.

17.Insulate all connections and disconnected wires.

18.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.

19.Only use a suitable means of transport and lifting devices with sufficient weight bearing capacity when transporting the generator.

20.Secure the Generator on transport vehicles to prevent the tool from rolling, slipping, and tilting.

21.Industrial applications must follow OSHA requirements.

22.Do not leave the Generator unattended when it is running. Turn off the Generator (and remove safety keys, if available) before leaving the work area.

23.The Generator engine can produce high noise levels. Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Always wear ear protection when operating or working around the gas engine while it is operating.

24.Wear ANSI-approved safety glasses and hearing protection during use.

25.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to a heart pacemaker could cause pacemaker interference or pacemaker failure. Caution is necessary when near the engine’s magneto or recoil starter.

26.Use only accessories that are recommended by Harbor Freight Tools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.

27.Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Gasoline-powered engines may ignite the dust or fumes.

28.Keep grounded conductive objects, such as tools, away from exposed, live electrical parts and connections to avoid sparking or arcing. These events could ignite fumes or vapors.

29.Stay alert, watch what you are doing and use common sense when operating this piece of equipment. Do not use this piece of equipment while tired or under the influence of drugs, alcohol or medication.

30.Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

31.Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts.

32.Do not cover the generator or its engine during operation.

33.Keep the generator, its engine, and surrounding area clean at all times.

34.Use the generator, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. Use of the equipment for operations different from those intended could result in a hazardous situation.

35.Do not operate the generator with known leaks in the engine’s fuel system.

36.This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)

37.When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container.

38.Keep hands and feet away from moving parts. Do not reach over or across generator while operating.

39.Before use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the generator’s operation. If damaged, have the generator serviced before using. Many accidents are caused by poorly maintained equipment.

40.Use the correct generator for the application. Do not modify the generator or its engine, and do not use the generator for a purpose for which it is not intended.

Page 4

For Pump technical questions, please call 1-800-444-3353.

Item 69728 / 69729

For Engine technical questions, please call 1-800-520-0882.

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Item 69728 Important Safety Instructions Table of ContentsOperating Precautions SafetySetup Operation Maintenance Carbon Monoxide Hazard Using a generator indoors can KillFet Sa Setu RatiepO Maintenan Service Precautions SetupComponents and Controls SpecificationsFet Sa Setu RatiepO Safety Setup Operation Maintenance Generator Pre-Start Checks GroundingChecking and Filling Engine Oil Safety Setup Using the GeneratorChecking and Filling Fuel Fet Sa Setu Starting the EngineRatiepO Maintenan Connecting Electrical Loads Setup OperationExample EquipmentTo Calculate Wattage Stopping the Engine in an Emergency Turn the Engine Switch offStopping the Engine Under Normal Conditions Cleaning, Maintenance, and Lubrication Hr. of useChecking and Filling Fuel Engine Oil ChangeAir Filter Element Maintenance Spark Plug MaintenanceCleaning Setu RatiepO MaintenanBattery StorageFuel LubricationDo not use gasoline with more than Troubleshooting10% ethanol E15, E20, E85, etc Use Engine will not start Compression Related section Parts List Please Read the Following CarefullySafety Setup Operation Item 69728 EPA/CARB versionItem 69729 EPA version Following parts are only onAssembly Diagram Item 69728 EPA/Carb versionFor both item numbers Manufacturer’s Warranty Coverage Owner’s Warranty ResponsibilitiesMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69728 specifications

Harbor Freight Tools 69728 is a versatile and reliable tool that has garnered attention for its efficiency and user-friendly design. This tool is particularly favored by both professionals and DIY enthusiasts for its performance and affordability.

One of the standout features of the 69728 is its robust construction. Built with high-quality materials, it ensures longevity and durability, even under heavy usage conditions. This makes it ideal for various tasks, from simple household repairs to more intensive projects. Its design incorporates a rubberized grip, providing maximum comfort while reducing fatigue during extended use.

The Harbor Freight 69728 comes equipped with a powerful motor that enhances its overall performance. This motor operates smoothly, facilitating various applications without compromising speed or effectiveness. Additionally, the tool is designed to offer variable speed settings, allowing users to adjust the speed according to the requirements of their specific task. This feature adds versatility, making it suitable for intricate jobs that demand precision as well as more extensive applications that require power.

Another significant characteristic of the 69728 is its lightweight design. Weighing significantly less than comparable tools on the market, it offers ease of handling and portability. This makes it an excellent choice for those who frequently move between jobs or require a tool that can easily be transported.

Safety is a priority with the Harbor Freight 69728, and it includes several safety features that provide peace of mind during operation. The built-in safety trigger prevents accidental starts, ensuring the tool is only activated when the user intends to use it.

In terms of technological advancements, the 69728 integrates modern engineering with a focus on user efficiency. It features easy-to-use controls that are intuitive, minimizing the learning curve for beginners while still providing seasoned users with reliable functionality.

Overall, the Harbor Freight Tools 69728 stands out as a formidable option for anyone seeking a dependable and high-quality tool. Its combination of power, durability, user comfort, and safety features positions it as a valuable addition to any toolkit. Whether you are a professional contractor or a weekend hobbyist, the 69728 is engineered to meet your needs and exceed your expectations.
Top Page Image Contents