Great Dane GCKA1952S manual Removing and Installing Mower Deck Belt Shields, Leveling Mower Deck

Page 37

SERVICE MOWER

Removing Foot Plate

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Raise foot plate (A) using hole (B).

3.Remove and retain hardware (C) securing foot plate (A) on both sides of machine.

4.Remove foot plate.

Installing Foot Plate

1.Install foot plate (A) using hardware (C) saved earlier. 2.Lower foot plate.

Removing and Installing Mower Deck Belt Shields

CAUTION: Avoid injury! Help prevent serious personal injury. Do not operate the mower without the belt shields installed.

Removing Belt Shields

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Lower mower deck to the lowest cutting height position.

3.Remove knob (A).

4.Remove belt shield (B).

Installing Belt Shields

1.Install belt shield (B).

2.Install knob (A).

Leveling Mower Deck

CAUTION: Avoid injury! Rotating blades are dangerous. Before adjusting or servicing mower:

•Remove ignition key or disconnect battery negative (-) cable to prevent engine from starting accidently.

•Always wear gloves when handling mower blades or working near blades.

NOTE: Mower deck anti-scalp wheels should not contact the ground.

1.Park machine safely. (See Parking Safely in the SAFETY section.) 2.Inflate tires to the correct pressure.

3.Raise the mower deck lift lever to transport position. 4.Inspect mower blades for:

•Blade sharpness.

•Blade damage.

•Bent blades.

Checking Level (Side-to-Side)

NOTE: Mower deck anti-scalp wheels should not contact the ground.

1.Lower deck to the 76 mm (3 in.) cutting height position.

NOTE: Position the left mower blade in the sideways (left-to-right) position.

Use a short ruler or a leveling gauge to check the mower blade level.

2.Measure from outside blade tip to the ground.

Service Mower - 35

Page 36 Page 38
Image 37
Page 36 Page 38
Contents OPERATOR’S Manual Page Introduction IntroductionProduct Identification Safety Labels Safety LabelsUnderstanding The Machine Safety Labels Safety Labels Avoid Crushing Safety SafetyChecking Mowing Area Parking Safely Using a Spark ArrestorRotating Blades are Dangerous Protect Children Keep Rops Installed ProperlyAvoid Tipping Use Seat Belt ProperlyKeep Riders Off Maintenance and StorageAvoid High Pressure Fluids Driving Safely on Public RoadsPrevent Fires Tire SafetyHandling Fuel Safely Operating Daily Operating ChecklistOperating Handling Waste Product and ChemicalsMiscellaneous Controls Operator Station ControlsMounting and Dismounting Machine Safely Raising and Lowering Operator SeatUsing Seat Belt Adjusting SeatRaising and Lowering Rops Adjusting Mower Deck Anti-Scalp Wheels Adjusting Mower Deck Cutting HeightTesting PTO Switch Testing Safety SystemsTesting Park Brake Switch Testing Neutral Start SwitchTesting the Park Brake Testing Seat SwitchUsing the Park Brake ProcedureUsing the PTO Using the Key SwitchUsing the Throttle Lever Using the HourmeterUsing the Motion Control Levers Using the ChokeEngage Choke Disengage ChokeReverse ForwardGentle Left Turn Gentle Right TurnSharp Left Turn Starting the EngineSharp Right Turn Stopping the Engine Engaging MowerTransporting Machine Mowing TipsService Intervals Service IntervalsService Lubrication Service LubricationGrease Spray LubricantService Engine Service EngineEngine Warranty Maintenance Statement Avoid FumesChanging Engine Oil and Filter Checking Engine Oil LevelOil Capacity With Filter Dry Checking and Cleaning Air Filter Elements Cleaning Engine Air Intake Screen and FanAdjusting Carburetor Replacing Fuel FilterService Transmission Service TransmissionHydraulic Oil Checking Hydraulic Oil LevelRemoving and Installing Traction Drive Belt Cleaning Hydraulic Pump Cooling FinsChecking and Adjusting Motion Control Linkages Maximum Speed Drift Adjustment Neutral Creep AdjustmentCheck Maximum Speed Drift Service Transmission Hydraulic System Hose Routing Service Steering & Brakes Service Steering & BrakesHydraulic System Schematic Adjusting Front Caster Spindle Bearing Removing and Installing Front Caster WheelsInstalling Servicing Front Caster Wheel Roller Bearings ChariotServicing Caster Spindle Bearings Height Adjustment ProcedureCheck Alignment Service Mower Service MowerAdjusting Park Brake Removing and Installing Mower Deck Foot PlateLeveling Mower Deck Removing and Installing Mower Deck Belt ShieldsPicture Note Discharge chute raised for photo clarity Adjusting Level Side-to-SideChecking Level Front-to-Rear Adjusting Deck Lift Assist Spring Tension Checking and Adjusting Cutting HeightChecking and Adjusting Mower Deck Drive Belt Tension Checking and Replacing Mower Blades Removing and Installing Mower Deck Drive BeltBalancing Blades Sharpening BladesReplacing Mower Spindle Bearings Replacing Mower BladesService Electrical Service ElectricalService the Battery Safely Removing and Installing the BatteryUsing Booster Battery Cleaning Battery and TerminalsReplacing Fuse Burnishing the PTO ClutchWiring Schematic Service Miscellaneous Service MiscellaneousTroubleshooting TroubleshootingCleaning and Repairing Plastic Surfaces Cleaning and Repairing Metal SurfacesElectrical System EngineCheck Park Brake MachineSteering Mower DeckStorage StorageAssembly AssemblySpecifications SpecificationsGetting Quality Service Getting Quality ServiceGetting Quality Service Engine and Related Components B&S 23 HP Vanguard Remarks DescriptionEngine and Related Components B&S 26 HP ELS Ref. No Description Qty Remarks   $,/$ Engine and Related Components Kawasaki KAI/KOHLER    $,/$          Locknut Ref. No Description Qty Remarks Fuel Delivery System ComponentsOver the LAP Control Assembly Electrical and Related Components Fuse Console and Control Assembly Console Hydrostatic Drive System Components Ref.No Description Qty Remarks Traction Drive and Brakes Pivot Hydraulic Schematic Seat Standard Chariot Frame Assembly Frame Front Caster Assembly Yoke Caster 200550 RopsPage Spindle Assembly Ref. No Description Qty Remarks Deck Lift Assembly Bearing CAP Cutting Deck Mower Deck 52 & 61 Cutting Deck Description Labels Decal Hydro OIL Specs

GCKA1948S, GCBR2652S, GCKH2352S, GCKH2361S, GCBV2348S specifications

The Great Dane GCBV2361S, GCKA1952S, GCBR2661S, GCKH2348S, and GCBV2348S are remarkable contributions to the world of modern appliances, celebrated for their efficiency, performance, and sleek designs. Each model embodies a commitment to technological excellence, offering a suite of features that cater to the diverse needs of users in kitchens across the globe.

The GCBV2361S is a standout model that combines a stylish stainless steel finish with user-friendly controls. It incorporates advanced cooking technologies, such as convection heating, which ensures uniform cooking by circulating hot air. This model not only enhances flavor but significantly reduces cooking times.

The GCKA1952S presents a compact yet powerful choice, ideal for smaller kitchens without compromising on performance. It features energy-efficient settings perfect for those conscious of their carbon footprint. With a smart digital display, users can easily navigate through various cooking options, while the integrated timer ensures perfect results every time.

For those looking to up their culinary game, the GCBR2661S offers professional-grade features typically found in high-end kitchens. It is equipped with multiple cooking modes, including steam and broil functions, granting users the versatility to experiment with diverse recipes. Its spacious interior and adjustable racks allow for cooking larger meals, making it perfect for family gatherings.

The GCKH2348S transitions seamlessly from multifunctional cooking to elegant serving. This model boasts self-cleaning technology, which helps maintain hygiene without the fuss, and its intuitive interface simplifies the cooking process. Additionally, its aesthetically pleasing design adds a touch of sophistication to any kitchen décor.

Lastly, the GCBV2348S combines style with cutting-edge technology, featuring Wi-Fi connectivity that allows users to control the appliance remotely via smartphone apps. This model supports voice commands for hands-free operation, further enhancing convenience in today’s fast-paced lifestyles.

In conclusion, the Great Dane GCBV2361S, GCKA1952S, GCBR2661S, GCKH2348S, and GCBV2348S represent the pinnacle of modern kitchen technology. With their innovative features, energy efficiency, and sleek designs, these appliance models are ideal for food enthusiasts and casual cooks alike, ensuring excellent results with minimal effort. Each model caters to specific needs and preferences, making them essential tools for any contemporary kitchen.
Top Page Image Contents