Global Machinery Company 25CC Use with the brush cutting blade, Use with the line trimming head

Page 10

•Bring the engine to full throttle before entering the material to be cut. The blade has maximum cutting power at full throttle and is less likely to bind, stall or cause blade thrust.

•Place yourself in a well balanced position, stable on both feet.

•Cut while swinging the upper part of your body from left to right. Swing the unit in the same direction as the blade spins, which increases the cutting action.

•Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

•Do not hit stones (even small ones), piles of earth, and small pieces of wood or anything else that could be hidden or poorly visible in the grass. If you hit a large object by accident, or if you block the cutting tool due to overloading or having the cutter jammed with grass, you must stop the engine.

•Put the petrol brush cutter on the ground and check that the cutting tool has not been damaged and if necessary replace the cutting tool. If the tool is only wrapped around something, use gloves and remove the material and clean the cutting tool.

CAUTION. Always wear safety gloves for this operation.

•To reduce the chance of material wrapping around the blade cut at full throttle. Swing the unit into the material to be cut, and avoid material just cut as you make the return swing.

NOTE. All protective devices of the machine as well as protective equipment must be maintained in good operation condition during the period of use.

Petrol brush cutter transmit vibrations to the operator during use. These vibrations can generate increased fatigue.

For this reason, we recommend taking regular breaks during work. We also recommend taking a break after a few hours of work to rest the engine. If abnormal noise or vibration occurs during operation, turn the brush cutter off immediately and have the problem corrected.

Use with the brush cutting blade

Cut the grass like you are in a corridor about 1.5m wide. Move step by step, moving the machine from left to right and vice-versa. Make sure at each step that you are still well balanced on your feet.

WARNING: Blade thrust may occur when the spinning blade contacts an object that it does not immediately cut. Blade thrust can be violent enough to cause the unit and/or operator to be propelled in any direction, and possibly loose control of the unit. Blade thrust can occur without warning if the blade snags, stalls or binds. It is more likely to occur in areas where it is difficult to see the material being cut.

Use with the line trimming head

Cut the grass like you are in a corridor about 1.5m wide. Move step by step, moving the machine from left to right and vice-versa. Make sure at each step that you are still well balanced on your feet.

The line trimmer has a bump feed mechanism which releases line without having to stop the engine. To release additional line lightly tap the cutting line and spool assembly

(4) on the ground while operating the unit at high speed.

NOTE. Always keep the trimming line fully extended. Line release becomes more difficult as the cutting line becomes shorter.

Each time the head is bumped it releases approximately 2cm of line. The cut off knife (5) on the blade guard will automatically cut off any excess line. For best results tap the head on hard soil or bare ground.

Replacement of the cutting line

 

R

1. Stop the engine.

 

2.Put the petrol line trimmer on the floor in a way that cutting line and spool assembly (2) is facing up.

3.Open the cutting line and spool assembly (2) by holding the spool housing firmly while

rotating the bump knob clockwise (Fig. R).

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Petrol Brush Cutter Contents Introduction Environmental protection Description of symbolsChoke control Specifications General safety instructionsContents of carton Additional safety rules for petrol brush cuttersUnpacking Know your product Attaching the line trimming Head and safety guard AssemblyAttaching the blade and the blade safety guard Joining the upper Lower shaftsFuelling Fitting the secondary handleRunning in the engine Starting the brush cutterStopping the brush cutter Use of the brush cutterUse with the line trimming head Use with the brush cutting bladeStop the engine Air filter MaintenanceFuel Filter Storage and maintenance after use Checking the spark plugProblems Power loss or sudden stopping of the enginePage Page GMC customer assist

25CC specifications

Global Machinery Company 25CC is a leading manufacturer renowned for its high-quality machinery and innovative engineering solutions. This equipment line is designed to meet a wide array of industrial demands, featuring advanced technology and exceptional performance that sets it apart in today's competitive market.

One of the standout features of Global Machinery Company 25CC is its commitment to efficiency. The machines are engineered with cutting-edge components that optimize fuel consumption while delivering maximum output. This is particularly beneficial for industries looking to reduce operational costs and improve their environmental footprint. Moreover, the 25CC models utilize energy-efficient motors that comply with international standards, ensuring they meet the rigorous requirements of modern industrial applications.

In terms of technology, the 25CC series incorporates state-of-the-art automation systems. These systems facilitate precise control and enhance the user experience, enabling operators to manage machinery with ease. Intuitive interfaces allow for real-time monitoring and diagnostics, providing vital information that aids in efficient operation and maintenance. This connectivity is further enhanced by IoT capabilities, enabling remote access to machine performance metrics and predictive maintenance insights.

Durability is another key characteristic of Global Machinery Company 25CC equipment. Constructed from high-grade materials and subject to rigorous testing, these machines are built to withstand the rigors of industrial environments. Their robust design minimizes downtime caused by mechanical failures and extends the lifespan of the equipment, providing long-term value to operators.

Safety is another paramount feature integrated into the design of the 25CC series. Safety mechanisms, such as emergency shut-off systems and advanced sensors, are built-in to protect operators and enhance workplace safety. This dedication to safety not only safeguards personnel but also assures compliance with industry regulations.

Lastly, Global Machinery Company 25CC prides itself on customer support and service. The company provides comprehensive training programs for operators, ensuring they are well-equipped to use the machinery safely and effectively. In addition, a network of service centers offers timely maintenance and repairs, further solidifying the company's commitment to customer satisfaction.

In conclusion, Global Machinery Company 25CC stands at the forefront of industrial machinery, combining efficiency, innovation, durability, and safety. With a focus on cutting-edge technology and exceptional customer support, the 25CC series offers a comprehensive solution for modern industrial needs.
Top Page Image Contents