Global Machinery Company 25CC Starting the brush cutter, Stopping the brush cutter

Page 9

•Mix only enough fuel for your immediate needs. Do not store the mixed fuel mixture.

Starting the brush cutter

Choke control

Start position (choke closed). Run position (choke open).

1.Move the ignition switch (11) to the on position marked with a (Fig. L).

2.Move the choke lever (19) upwards to the start position (cold start) (Fig. M).

NOTE. This is not required if the engine is warm.

3.Push the primer bulb 6 times, until the petrol/oil mixture fills the primer bulb (Fig. N).

NOTE. This is not required if the engine is warm.

4.Pull the recoil starter (14) several times until you hear the engine starting (Fig. O).

5.Push the choke lever slowly down to the run position (warm start).

6.The engine may start or it may require you to pull on the recoil starter until the engine starts.

7.Allow the engine to run idle for around 10 seconds to let it warm up.

9.Squeeze the safety lever

(18)and throttle trigger

(13)to engage the blade or spool (Fig. P).

L

M

N

O

P

Stopping the brush cutter

WARNING: The blade/spool will continue to rotate for a few seconds after the engine has stopped.

1. Release the throttle trigger and

allow the engine to idle for a Q few moments.

2.Move the ignition switch (11) to the off position marked STOP (Fig. Q).

3.The engine will now stop.

Running in the engine

1.During the first 2-3 hours of work, run the engine at a moderate speed.

2.We advise you in any case not to maintain your engine at a high speed as the different components must settle with each other during the process of running in the engine.

3.It is at the end of the running in period that the engine will reach its maximum power.

4.After the first two hours of work, stop and make sure that all nuts and screws are securely fastened, and tighten them if necessary.

Use of the brush cutter

This petrol brush cutter is designed to cut grass, small bushes, and shrubs.

•Never operate the brush cutter without a properly functioning muffler and spark plug cover installed.

•Always use the shoulder strap, when using the tool, to avoid serious injury.

•Never operate the brush cutter unless it is properly assembled and in good working condition.

•Perform a few accelerations of the motor without reaching maximum speed and without working to make sure that everything is in good working order.

•Start the engine only when you are close to the working area.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Petrol Brush Cutter Contents Environmental protection Description of symbols IntroductionChoke control General safety instructions SpecificationsAdditional safety rules for petrol brush cutters Contents of cartonUnpacking Know your product Attaching the blade and the blade safety guard AssemblyAttaching the line trimming Head and safety guard Joining the upper Lower shaftsFitting the secondary handle FuellingStopping the brush cutter Starting the brush cutterRunning in the engine Use of the brush cutterUse with the brush cutting blade Use with the line trimming headStop the engine Maintenance Air filterFuel Filter Checking the spark plug Storage and maintenance after usePower loss or sudden stopping of the engine ProblemsPage Page GMC customer assist

25CC specifications

Global Machinery Company 25CC is a leading manufacturer renowned for its high-quality machinery and innovative engineering solutions. This equipment line is designed to meet a wide array of industrial demands, featuring advanced technology and exceptional performance that sets it apart in today's competitive market.

One of the standout features of Global Machinery Company 25CC is its commitment to efficiency. The machines are engineered with cutting-edge components that optimize fuel consumption while delivering maximum output. This is particularly beneficial for industries looking to reduce operational costs and improve their environmental footprint. Moreover, the 25CC models utilize energy-efficient motors that comply with international standards, ensuring they meet the rigorous requirements of modern industrial applications.

In terms of technology, the 25CC series incorporates state-of-the-art automation systems. These systems facilitate precise control and enhance the user experience, enabling operators to manage machinery with ease. Intuitive interfaces allow for real-time monitoring and diagnostics, providing vital information that aids in efficient operation and maintenance. This connectivity is further enhanced by IoT capabilities, enabling remote access to machine performance metrics and predictive maintenance insights.

Durability is another key characteristic of Global Machinery Company 25CC equipment. Constructed from high-grade materials and subject to rigorous testing, these machines are built to withstand the rigors of industrial environments. Their robust design minimizes downtime caused by mechanical failures and extends the lifespan of the equipment, providing long-term value to operators.

Safety is another paramount feature integrated into the design of the 25CC series. Safety mechanisms, such as emergency shut-off systems and advanced sensors, are built-in to protect operators and enhance workplace safety. This dedication to safety not only safeguards personnel but also assures compliance with industry regulations.

Lastly, Global Machinery Company 25CC prides itself on customer support and service. The company provides comprehensive training programs for operators, ensuring they are well-equipped to use the machinery safely and effectively. In addition, a network of service centers offers timely maintenance and repairs, further solidifying the company's commitment to customer satisfaction.

In conclusion, Global Machinery Company 25CC stands at the forefront of industrial machinery, combining efficiency, innovation, durability, and safety. With a focus on cutting-edge technology and exceptional customer support, the 25CC series offers a comprehensive solution for modern industrial needs.
Top Page Image Contents