Global Machinery Company 25CC instruction manual Fuelling, Fitting the secondary handle

Page 8

3.Remove the split pin, nut (by turning in a clockwise direction) and outer flange. Leave the inner flange fitted.

NOTE. Insert the locking pin to prevent the shaft rotating (Fig. D).

NOTE. The outer flange is not used when fitting the line trimmer head

4.Place the spool head on the end of the shaft and tighten in an anti-clockwise. To do this you need to rotate the spool until the holes of the inner flange and the gearbox housing align, insert the locking pin to keep them still, then firmly tighten the spool by

hand (Fig. H).

NOTE. Before attempting to use the line trimmer, pull both the lines to release the bump fee mechanism.

H

Fitting the secondary handle

 

The brush cutter comes with a

I

secondary handle (8) which can

 

be attached by fixing it to the

 

shaft with the screws and nuts

 

supplied (Fig. I).

 

IMPORTANT. When using the

 

brush cutter or line trimmer head

 

the secondary handle must

 

 

ALWAYS be fitted.

 

Fuelling

MOTOR FUEL: MIX AT 40:1 ONLY

1.Use fresh unleaded petrol. You must use 2-stroke oil specifically made for heavily stressed two-stroke engines.

2.Mix the petrol and oil in an approved container. Never mix fuel in the brush cutter.

3.Place the brush cutter

upright on the ground or on J

a sturdy bench and wipe any debris from around the fuel cap (Fig. J).

4.Unscrew the fuel tank cap and pour the mixture into the tank using a funnel (Fig. K).

5. Be careful not to spill any

K

mixture. If this happens, wipe

 

the spill with a clean rag.

 

6.Start the engine at least three metres away from the area where the fuel tank has been filled up in order to avoid any risk of fire.

•Always use extreme care when handling fuel! Fuel is highly flammable.

•Never attempt to fuel the brush cutter if the fuel system components are damaged or are leaking.

•Never attempt the refuel the engine while it is running or still warm, allow it to cool before fuelling.

•Never smoke or light any fires near the brush cutter or fuels.

•Always transport and store fuels in an approved container.

•Never place flammable material close to the engine muffler.

•Do not use petrol which contains ethanol or methanol as it may damage the fuel lines and other engine parts.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Petrol Brush Cutter Contents Choke control Environmental protection Description of symbolsIntroduction Specifications General safety instructionsUnpacking Additional safety rules for petrol brush cuttersContents of carton Know your product Assembly Attaching the blade and the blade safety guardAttaching the line trimming Head and safety guard Joining the upper Lower shaftsFuelling Fitting the secondary handleStarting the brush cutter Stopping the brush cutterRunning in the engine Use of the brush cutterStop the engine Use with the brush cutting bladeUse with the line trimming head Fuel Filter MaintenanceAir filter Storage and maintenance after use Checking the spark plugProblems Power loss or sudden stopping of the enginePage Page GMC customer assist

25CC specifications

Global Machinery Company 25CC is a leading manufacturer renowned for its high-quality machinery and innovative engineering solutions. This equipment line is designed to meet a wide array of industrial demands, featuring advanced technology and exceptional performance that sets it apart in today's competitive market.

One of the standout features of Global Machinery Company 25CC is its commitment to efficiency. The machines are engineered with cutting-edge components that optimize fuel consumption while delivering maximum output. This is particularly beneficial for industries looking to reduce operational costs and improve their environmental footprint. Moreover, the 25CC models utilize energy-efficient motors that comply with international standards, ensuring they meet the rigorous requirements of modern industrial applications.

In terms of technology, the 25CC series incorporates state-of-the-art automation systems. These systems facilitate precise control and enhance the user experience, enabling operators to manage machinery with ease. Intuitive interfaces allow for real-time monitoring and diagnostics, providing vital information that aids in efficient operation and maintenance. This connectivity is further enhanced by IoT capabilities, enabling remote access to machine performance metrics and predictive maintenance insights.

Durability is another key characteristic of Global Machinery Company 25CC equipment. Constructed from high-grade materials and subject to rigorous testing, these machines are built to withstand the rigors of industrial environments. Their robust design minimizes downtime caused by mechanical failures and extends the lifespan of the equipment, providing long-term value to operators.

Safety is another paramount feature integrated into the design of the 25CC series. Safety mechanisms, such as emergency shut-off systems and advanced sensors, are built-in to protect operators and enhance workplace safety. This dedication to safety not only safeguards personnel but also assures compliance with industry regulations.

Lastly, Global Machinery Company 25CC prides itself on customer support and service. The company provides comprehensive training programs for operators, ensuring they are well-equipped to use the machinery safely and effectively. In addition, a network of service centers offers timely maintenance and repairs, further solidifying the company's commitment to customer satisfaction.

In conclusion, Global Machinery Company 25CC stands at the forefront of industrial machinery, combining efficiency, innovation, durability, and safety. With a focus on cutting-edge technology and exceptional customer support, the 25CC series offers a comprehensive solution for modern industrial needs.
Top Page Image Contents