Global Machinery Company 25CC instruction manual Specifications, General safety instructions

Page 4

Specifications

Engine:

25cc, 2 stroke

Cutting diameter (swathe)

 

Blade:

230mm

Spool head:

390mm

Speed:

7500-8500min-1

Shaft:

Straight

Blade:

3 Segment brush blade

Spool Type:

Bump feed, twinline

Line thickness:

2mm

Fuel tank capacity:

450ml

Fuel type:

Unleaded petrol

Fuel mixture:

Unleaded petrol /

 

2-stroke oil (40:1)

Equivalent spark plugs:

NGK BPMR7A

 

CHAMPION CJ7Y

Net Weight:

7.6kg

Noise label rating 85dBA (taken at 7.5 meters) you must wear ear protection at all times.

General safety instructions

WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in fire and/or serious injury.

Save these instructions 1) Work area

a)Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Personal safety

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

d)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

e)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

f)If devices are provided for the connection of dust extraction and collection facilities ensure that these are connected and properly used. Use of these devices can reduce dust-related hazards.

3) Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Turn tool off completely before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Petrol Brush Cutter Contents Introduction Environmental protection Description of symbolsChoke control Specifications General safety instructionsContents of carton Additional safety rules for petrol brush cuttersUnpacking Know your product Assembly Attaching the blade and the blade safety guardAttaching the line trimming Head and safety guard Joining the upper Lower shaftsFuelling Fitting the secondary handleStarting the brush cutter Stopping the brush cutterRunning in the engine Use of the brush cutterUse with the line trimming head Use with the brush cutting bladeStop the engine Air filter MaintenanceFuel Filter Storage and maintenance after use Checking the spark plugProblems Power loss or sudden stopping of the enginePage Page GMC customer assist

25CC specifications

Global Machinery Company 25CC is a leading manufacturer renowned for its high-quality machinery and innovative engineering solutions. This equipment line is designed to meet a wide array of industrial demands, featuring advanced technology and exceptional performance that sets it apart in today's competitive market.

One of the standout features of Global Machinery Company 25CC is its commitment to efficiency. The machines are engineered with cutting-edge components that optimize fuel consumption while delivering maximum output. This is particularly beneficial for industries looking to reduce operational costs and improve their environmental footprint. Moreover, the 25CC models utilize energy-efficient motors that comply with international standards, ensuring they meet the rigorous requirements of modern industrial applications.

In terms of technology, the 25CC series incorporates state-of-the-art automation systems. These systems facilitate precise control and enhance the user experience, enabling operators to manage machinery with ease. Intuitive interfaces allow for real-time monitoring and diagnostics, providing vital information that aids in efficient operation and maintenance. This connectivity is further enhanced by IoT capabilities, enabling remote access to machine performance metrics and predictive maintenance insights.

Durability is another key characteristic of Global Machinery Company 25CC equipment. Constructed from high-grade materials and subject to rigorous testing, these machines are built to withstand the rigors of industrial environments. Their robust design minimizes downtime caused by mechanical failures and extends the lifespan of the equipment, providing long-term value to operators.

Safety is another paramount feature integrated into the design of the 25CC series. Safety mechanisms, such as emergency shut-off systems and advanced sensors, are built-in to protect operators and enhance workplace safety. This dedication to safety not only safeguards personnel but also assures compliance with industry regulations.

Lastly, Global Machinery Company 25CC prides itself on customer support and service. The company provides comprehensive training programs for operators, ensuring they are well-equipped to use the machinery safely and effectively. In addition, a network of service centers offers timely maintenance and repairs, further solidifying the company's commitment to customer satisfaction.

In conclusion, Global Machinery Company 25CC stands at the forefront of industrial machinery, combining efficiency, innovation, durability, and safety. With a focus on cutting-edge technology and exceptional customer support, the 25CC series offers a comprehensive solution for modern industrial needs.
Top Page Image Contents